Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
™ ® POWDER ACTUATED TOOLMANUFACTURERS. INSTITUTE INC. ™ ® Operating Instructions IMPORTANT: Read all instructions and warnings found in this manual and on power load packaging before operating your powder actuated tool. This manual should always accompany the tool and be transferred with it upon change of ownership. Index Warning: Safety Precautions ............................................................................3-11 Why A Power Fastener Holds..............................................................................12 Selecting Power Fasteners and Power Loads ..................................................... 13 Operation........................................................................................................14-16 Maintenance........................................................................................................ 16 Parts List........................................................................................................ 16, 17 Accessories ......................................................................................................... 17 Tool Disassembly and Assembly....................................................................18-22 Troubleshooting Guide .................................................................................. 23, 24 Application Chart ........................................................................................... 24, 25 Replacement Parts and Accessories .................................................................. 26 Technical Service ................................................................................................ 26 Repair Service.....................................................................................................26 Parts Centrals...................................................................................................... 27 Limited Warranty.................................................................................................. 28 Maintenance Log............................................................................................85-87 REMINGTON® Model 493 and Model 498 The Remington® Model 493 and Model 498 Powder Actuated Fastening Tool is designed for use with Remington® .27 caliber power load strips and Remington® power fasteners. Remington® power fasteners are manufactured from special steel and heat treated to produce a very hard, yet ductile, fastener. Maximum 3" - Model 493 Maximum 1 1/2" - Model 498 10-Shot Power Load Strip* TriggerRecommended Approved Eye ProtectionSpall ShieldBarrel AssemblyMuzzle/GuidePower Fastener* * Not provided with tool 114915 2 Warning: Safety Precautions The following pages contain detailed warnings, cautions, and rules of safe operation. Read carefully and become familiar before operating to avoid serious injury. We expressly disclaim any liability for any injury to persons or damage to property which result from your failure to take the precautions contained in this manual. WARNING: This tool is designed only for use by qualified operators. Qualification is obtained through a thorough understanding of the Safety Precautions and operating instructions as defined in this operating manual. NOTE: The labor regulations of many states require that the operator of this tool on a job site be thoroughly trained and certified for competence prior to operating this tool. For certification procedures, call: DESA Power Tools™ Technical Services Department, 1-800-858-8501 (English Only) or visit BEFORE USING ?? 1. ALWAYS handle the tool as if it were loaded. Before starting work, check that the tool is unloaded and the muzzle is clear. NEVER load a tool unless it is going to be used. DEFECTIVE 2. ALWAYS inspect to make sure the tool is working properly. If the tool does not work properly, remove from service and tag DEFECTIVE. DO NOT use the tool again until it has been properly repaired. 3. Operators and bystanders must ALWAYS wear goggles and ear protection which meet or exceed the accepted standards for adequate protection in your country. In the USA, refer to ANSI standards. In Canada, refer to CSA standards. 114915 3 Safety Precautions POWDERACTUATEDTOOLSIN USEWARNING! 4. ALWAYS clear the work area on all sides and post appropriate warning signs on job sites. 5. ALWAYS make sure the work area is clean from loose material and debris. HANDLING THE TOOL 1. NEVER place your hand over the muzzle. Accidental discharge can cause serious injury. 2. NEVER place your finger on the trigger until the tool’s muzzle is against the work surface. 114915 4 Safety Precautions POWERLOADSPOWELOAD 3. ALWAYSstore UNLOADED powder actuated tool and power load strips in a locked container. Keep power loads of different power levels in separate containers. 4. NEVER carry or pass a loaded powder actuated tool. NEVER point a powder actuated tool at anyone. 5. If the tool is dropped, inspect for damage and repair it bef...