Stimmen - 1, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
/ Camarillo, CA 93011 Visit our Web site at: Copyright No portion of this manual or any artwork contained herein may be reproduced in any 1997 by Harbor Freight Tools®. All rights reserved. shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts, please call 1-800-444-3353. Specifications ITEM # Minimum Roll Diameter Maximum Roll Length Maximum Thickness (Steel) Maximum Thickness (Brass) Maximum Thickness (Aluminum) Wire Forming Grooves Weight Overall Dimensions 36698 1” 12” 20 Gauge 18 Gauge 17 Gauge 1/8”, 1/4”, 3/8” 37.4 Lbs. 23” x 6.68” x 9.43” SAVE THIS MANUAL You will need this manual for the safety instructions, operating instructions, and parts list. Put it in a safe, READ ALL INSTRUCTIONS dry place for future reference. Keep your invoice with BEFORE ASSEMBLING OR this manual. Write the invoice number on the inside OPERATING THE SLIP ROLL. front cover. SAFETY WARNINGS & CAUTIONS WARNING: When using electric tools, machines or equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury. READ ALL INSTRUCTIONS BEFORE USING THIS TOOL 1. KEEP WORK AREA CLEAN. Cluttered areas invite injuries. 2. CONSIDER WORK AREA CONDITIONS. Do not use in damp, wet or poorly lit locations. Do not expose to rain. Keep work area well lit. 3. KEEP CHILDREN AWAY. All children should be kept away from the work area. Do not let them handle machine. 4. STORE IDLE EQUIPMENT. When not in use, tools should be locked up in a dry location to inhibit rust. If possible, store in an area out of reach of children. 5. DO NOT FORCE THE MACHINE OR TOOL. It will do the job better and more safely at the rate for which it was intended. 6. USE THE RIGHT TOOL. Do not force a small tool or attachment to do the work of a larger industrial tool. Do not use a tool for a purpose for which it was not intended. 7. DRESS PROPERLY. Do not wear loose clothing or jewelry. They can be caught in moving parts. Protective gloves and non-skid footwear are recommended when working. Wear restrictive hair covering to contain long hair, preventing it from getting caught in machinery. Page 2 -- SKU 36698 8. USE EYE AND EAR PROTECTION. Use a full face mask if the work you are doing produces metal filings, dust or wood chips. Goggles are acceptable in other situations. Wear a clean dust mask if the work creates a lot of fine or coarse dust. When operating for extended periods of time, use approved ear protection. Safety goggles and ear protectors are available from Harbor Freight Tools. 9. SECURE WORK. Use clamps or a vise to hold the work if possible. It is safer than using your hands and it frees both hands to operate the tool. 10. DO NOT OVERREACH. Keep proper footing and balance at all times. 11. MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for better and safer performance. Follow instructions for lubricating and changing accessories. Keep handles dry, clean and free from oil and grease. 12. STAY ALERT. Watch what you are doing, use common sense. Do not operate any tool when you are tired. 13. CHECK DAMAGED PARTS. Before using any tool, any part that appears damaged should be carefully checked to determine that it will opeate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting and other conditions that may affect its operation. Any parts that is damaged should be properly repaired or replaced by an authorized service center unless otherwise indicated elsewhere in the instruction manual. 14. REPLACEMENT PARTS AND ACCESSORIES. When servicing, use only identical replacement parts. Only use accessories intended for use with this tool. Approved accessories are available from Harbor Freight Tools. 15. DO NOT OPERATE TOOL IF UNDER THE INFLUENCE OF ALCHOHOL OR DRUGS. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not operate machine. UNPACKING If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual. Page 3 -- SKU 36698 MOUNTING Step 1:Bolt the Slip Roll to a secure work surface using the four holes in the BASE (#25). Step 2:You must purchase your own hardware. Buy four 5/16” bolts, nuts and lock washers, and eight washers. Add 1” to the thickness of your workbench to determine the appropriate length of your bolts. Step 3:Place the Slip Roll in the desired location, making sure that there is enough room for the handle (positioned on the right when looking from the front) to be moved. Make sure there is enough room behind the Roll to accommodate stock. Step 4:Mark the bench through the holes in the BASE. Step 5:Remove Slip Roll. Step 6:Drill 11/32” holes in the workbench. Step 7:Place the Slip Roll so the holes in the BASE line up with the drilled holes. Step 8:Install hardware in the f...