Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Hersteller: Pittsburgh Corning Dateigröße: 496.01 kb Dateiname: 95840.pdf Unterrichtssprache:

Copyright© 2007 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions or replacement parts, please call 1-800-444-3353. Page SKU 95840-95841 For technical questions, please call 1-800-444-3353. Specifications 95840-3/8” 95841-1/2” Drive 3/8” 1/2” Net Weight 2.2 Lbs. 2.55 Lbs. Material Carbon steel head and tube, thermoplastic LCD read-out, rubber Handle Carbon steel head and tube, thermoplastic LCD read-out, rubber Handle Tool Length 14-3/4” L 17-3/4” L Head Depth .75” T .75” T Head Width 1.7” W 1.7” W Gear Action 10 degrees 10 degrees Shaft Width 0.87” 0.87” Maximum Range 83.3 Ft-Lbs./ 1000 In. Lbs., m-KG 11.5/ cm - KG 1150/ N-m113 150 Ft.-Lbs., 1800 In. Lbs., m-Kg 20.7, CM-KG 2070, N-m 203 Minimum Range 16.0 Ft. Lbs./ 195 In. Lbs., M- KG 2.25/ CM -KG 225/ N-m 22.0 30.0 Ft. Lbs., 360 In. Lbs., M- Kg 4.1, CM-KG 410, N-m 40.5 Increments 0.1 0.1 Accuracy 3% acceptable variation through full torque range 3% acceptable variation through full torque range Power Source 3 Volt Battery-CR2032 (included) 3 Volt Battery CR2032 (included) The Torque Wrench is certified to have been calibrated prior to shipment to the accuracy of +/- 4% in the right hand direction and +/- 6% in the left hand direction on readings 20% to 100% of capacity. On readings below 20% of capacity, the accuracy is +/- two minor scale increments. Save This Manual You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Write the product’s serial number in the back of the manual near the assembly diagram, or write month and year of purchase if product has no number. Keep this manual and invoice in a safe and dry place for future reference. GENERAL SAFETY RULES WARNING! READ AND UNDERSTAND ALL INSTRUCTIONSFailure to follow all instructions listed below may result in electric shock, fire, and/or serious injury. SAVE THESE INSTRUCTIONS Use only 1/2” (95841) or 3/8” (95840) sockets with the torque capability shown in the specifications chart on prior page. Otherwise, the socket could fly off the drive anvil or break apart, causing injury. Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. Keep children away while operating the Digital Torque Wrench. Keep children out of the work area. Stay alert. Do not operate the Digital Torque Wrench while tired or under the influence of drugs, alcohol, or medication. Do not overload the Digital Torque Wrench. Use the correct tool for your application. Do not use it for applications other than intended. Maintain the Torque Wrench with care. Do not use a damaged Torque Wrench. Tag a damaged Torque Wrench “Do not use” until repaired. Torque Wrench service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury. When servicing the Torque Wrench, use only identical replacement parts. Follow instructions in the “Inspection and Maintenance” section of this manual. Use eye and ear protection. Always wear ANSI-approved impact safety goggles and hearing protection. Do not use cheater bars or hammers to force the Torque Wrench. Do not use the Torque Wrench to break a fastener loose. Always pull a Torque Wrench towards you. Pushing the Torque Wrench may force it past its maximum capacity and increase the risk of losing control, which may cause injury. Maintain tools with care. Make certain that the Torque Wrench has a fresh battery. Inspect the Torque Wrench periodically and, if damaged, have it repaired by an authorized technician. Do not expose this product to rain or wet conditions. Water entering a Digital Torque Wrench will damage it. Do not use the Torque Wrench: If the battery is low Near any explosive gasses or fumes If any abnormal operation is detected (if in doubt about the condition of the Torque Wrench have it serviced) If the Battery Cover is open Do not bump or shock the Torque Wrench when applying it to any workpiece. Rough treatment may damage the highly sensitive mechanism. Unpacking When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible. operation On/Off SwitchFunction Button Handle Dial (Torque rangesettings) Battery CompartmentBattery CoverBattery Figure 1Put on ANSI-approved face shield or safety glasses. Select the desired socket. Make certain that the socket fits properly on the Nut or Bolt being threaded on or off. Set the Torque Wrench to the desired Torque. The Torque Wrench can be set for digital readout in Inch-Lbs., Ft.- Lbs., N-m, m-Kg and ...

Herunterladen

Geben Sie zwei Ziffern: