Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
13135 WEST LISBON RD. BROOKFIELD, WIS. AS AN AID TO REASSEMBLY, TAKE NOTE OF WIRE ROUTING AND POSITION IN WIRE GUIDES AND TRAPS WHILE DISMANTLING TOOL. DATE Nov. 2002 BULLETIN 58-01-1835 SOLDER BOTH MOTOR LEADS TO THE SWITCH AS SHOWN. DO NOT USE TERMINALS. TO THE SWITCH CONNECT WIRES AS SHOWN AND PLACE THE COMPONENTS INTO THE LEFT HANDLE HALVE. CAREFULLY ROUTE THE WIRES TO BE SURE THAT THERE IS NO PINCHING WHEN REASSEMBLING THE RIGHT HANDLE HALVE. FROM RED #2 MOTOR ASSY li&K-FROM BLACK #1 MOTOR ASSY. A WARNING SWITCH POLARITY SENSITIVE If #3 and #4 are wired incorrectly with connector block, switch wiii be damaged and destroyed! WIRING SPECIFICATIONS Wire No. Wire Color Origin or Part No. Gauge Length Terminals, Connectors and End Wire Preparation 1 Black Motor Assy. - - Component of the motor assembly. 2 Red Motor Assy. - - Component of the motor assembly. 3 Red Switch Assy. - - Component of the switch assembly. 4 Black Switch Assy. - - Component of the switch assembly. BULKLEAD WIRE - 3ULLETIN 58-01-0003 NOTE: All lead lengths are before stripping. All leads must be held to ± .125" unless specified elsewhere. Strip wire per ES 13-11. Crimp terminals per ES 13-15. TERMINAL DESCRIPTION Code Part No. Qty. Drwg. 2...