Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
Wear restrictive hair covering to contain long hair. 7. Use eye and ear protection. Always wear ANSI approved impact safety goggles. 8. Do not overreach. Keep proper footing and balance at all times. Do not reach over or across running machines. 9. Maintain tools with care. Keep tools sharp and clean for better and safer performance. Follow instructions for lubricating and changing accessories. Inspect tool cords periodically and, if damaged, have them repaired by an authorized technician. The handles must be kept clean, dry, and free from oil and grease at all times. 10. Disconnect power. Unplug Charger Adapter when not in use. 11. Remove adjusting keys and wrenches. Check that keys and adjusting wrenches are removed from the tool or machine work surface before operating tool. 12. Avoid unintentional starting. Be sure the switch is in the Off position when not in use and before plugging in. Do not carry any tool with your finger on the trigger. 13. Stay alert. Watch what you are doing, use common sense. Do not operate any tool when you are tired. 15. Check for damaged parts. Before using any tool, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment and binding of moving parts; any broken parts or mounting fixtures; and any other condition that may affect proper operation. Any part that is damaged should be properly repaired or replaced by a qualified technician. Do not use the tool if any switch does not turn On and Off properly. 16. Guard against electric shock. Prevent body contact with electrical circuits when using this tool. 17. Replacement parts and accessories. When servicing, use only identical replacement parts. Use of any other parts will void the warranty. Only use accessories intended for use with this tool. Approved accessories are available from Harbor Freight Tools. 18. Do not operate tool if under the influence of alcohol or drugs. Read warning labels if taking prescription medicine to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not operate the tool. 19. Maintenance. For your safety, service and maintenance should be performed regularly by a qualified technician. 20. People with pacemakers should consult their physician(s) before using this product. Electromagnetic fields in close proximity to a heart pacemaker could cause interference to or failure of the pacemaker. In addition, people with pacemakers should adhere to the following: ¦ Avoid operating power tools alone. ¦ Don’t use a power tool with the power switch locked on. ¦ Properly maintain and inspect all tools before use to avoid electrical shock. Note: Performance of this tool may vary depending on variations in battery power. Warning: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. Unpacking When unpacking, check to make sure the that all following parts are included. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual. Cordless ScrewdriverCharger AdapterAccessory Bitsand Adapters Operation Battery Precautions 1. To avoid accidents, only charge the supplied batteries. Do not use a different charger adapter with this tool. 2. Do not expose the battery to rain or wet conditions. 3. To avoid damage of cable and plug, never pull the cable to disconnect the charger. 4. Do not charge the battery if either the cable or plug are damaged. 5. Repairs should be carried out by a qualified technician only. 6. Do not touch the battery poles with any conductive source. 7. Do not store the battery in a box with other metal objects. 8. Do not throw the battery in a fire. Charging the Battery The internal Battery does not come charged from the factory. Charge before using. 1. Insert the Charger Adapter module plug into the unit connector as shown below. Note: Never over-discharge a battery by using the tool even after tool performance is decreasing. Severe heat is most destructive to a battery; the more heat generated, the faster the battery loses power. A battery that gets too hot can be permanently damaged. Never attempt to discharge a tool’s battery by continuing to pull the tool trigger. When tool performance begins to diminish, stop the tool and recharge the battery for optimal performance. 2. Plug the Charger Adapter module into an electrical outlet. The red LED on the cordless Screwdriver will light. Charge the new battery from 5 to 7 hours. Battery usage time will ramp up as the new Battery is used, and recharged. Do not overcharge the battery. Caution: Never charge Battery for more than 7 hours continuously. Charger Adapter should not be left plugged in or charging for more ...