If you wish, you can clean the filter cylinder case with cold tap water and some washing-up 7 8 9 liquid. If you want to wash the filter cylinder, wash it thoroughly with only water. Do not use any soap, washing-up liquid or other detergent to clean the filter. Let the filter cylinder drycompletely before you reinsert it into the case (Fig. 24). 10 Put the filter cylinder back into the case and turn the handle clockwise until the filtercylinder locks into position. Make sure the filter cylinder

Notes: Opening the CD player clears any program containing tracks from a disc loaded in the CD player. Opening the CD recorder clears any program containing tracks from a disc loaded in the CD recorder. 2 Insert a disc (printed side up) in the tray. 3 CD player: Press / OPEN/CLOSE again to close the drawer. . The drawer is closed and READING is displayed. . CD, the total number of tracks and the total playing time of the disc are displayed. CD recorder: Press / OPEN/CLOSE to close the drawer. .

It ensures a perfect recording of the source material, meaning a true “bit for bit” recording. DLR will not be active, when ALC is used or when the record level is adjusted. 20 Auto Level Control (ALC) Auto Level Control ensures that the tracks on the recorded disc have a similar volume level. Always the already recorded tracks of the CDR(W) disc will be taken as reference for the volume level of the following recordings. Auto level control becomes automatically active, when: – COMPILE CD is bei

1 Important• Never place the product and accessories near naked flames or other heat sources, including direct sunlight.• Never insert objects into the

1 Important• Never place the product and accessories near naked flames or other heat sources, including direct sunlight.• Never insert objects into the

If the audio format on the disc is not supported, it will be downmixed to two-channel sound (linear-PCM). • [ Off ] – disable audio output from your TV. The sound is only output through this speaker system. [ Audio Sync ] Set the default delay time for audio output when you play a video disc. 1. To star t, press OK. 2. Press b B to set the delay time. 3. Press OK to confirm and exit. [ Night Mode ] Make loud sound level softer and soft sound level louder so that you can watch the DVD movies at a