Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
2.To access the radio tuner press FUNCTION button.(Each press will access in order:DVD Tuner Analog In DVD) 3.To change FM or AM band, press FM/AM button on remote control while in Tuner Mode. 4.To enter a station frequency directly, use number button. Example: 94.7MHz-press 947(in FM mode), 1220KHz-press 1220(in AM mode), then press ENTER. If unwanted, press CLEAR button. FUNCTION ENTER Storing Channels in Memory Read thoroughly before attempting to store any radio stations. HT-180 stores 40 FM and 20 AM stations. 1.Press GOTO from the remote control. The tuner will automatically search and store all local stations with good signal strength. 2.Press TUNING+ or TUNING- button to scan back or forward to a desired radio station with good signal strength. To manual scan in increments or decreases press the TUNING + or TUNING - on the remote control for 1-2 secends. 3.Press PRESET + or PRESET - to select stored frequencies in sequential order. 4.To number your stored stations,press SETUP,input the station number,then press SETUP again. TUNING + TUNING - PRESET - FM/AM PRESET + NOTICE The default setting status of the HT-180 is DVD playback. 3 H T - 1 8 0 A P E X D I G I T A L AFF Function WHAT IS AFF? AFF stands for APEX Full-screen Function. It allows you to fill the television screen viewing area when using a widescreen formatted DVD. Press the AFF button on your remote control,this will eliminate black bars on the top & bottom of the TV screen when viewing movies with an aspect ratio of 1.85:1 and minimize (but not eliminate) black bars on movies with a wider aspect ratio (2.35:1). AFF After AFF Before AFF NOTE AFF will not function in stop mode. 3 H T - 1 8 0 A P E X D I G I T A L Memo On Output Sounds DISCS AND OUTPUT SOUNDS DVD Video Discs CD MP3 CD Sound recording system Audio setting on the setting screen ANALOG AUDIO OUT jacks DIGITAL AUDIO OUT jack Linear PCM 48kHz 96kHz Dolby Digital MPEG 2 MP3 PCM44.1kHz SPDIF /PCM ANA- LOG ANA- LOG SPDIF /PCM ANA- LOG ANA- LOG SPDIF /RAW SPDIF /PCM SPDIF /RAW SPDIF /PCM SPDIF /RAW SPDIF /RAW SPDIF /PCM SPDIF /RAW SPDIF /PCM SPDIF /RAW ANA- LOG ANALOG ___ ___ ___ __ o o o o __ o ___ ___ o ___ ___ ___ PCM (48kHz) ___ PCM (48kHz) PCM (48kHz) MPEG 2 bitstream PCM (44.1kHz) PCM (44.1kHz) Dolby Digital bitstream __ PCM (48kHz) __ ___ ___ __ MPEG 1 AUDIO LAYER 3 DISC (MP3) MP3 Audio Disc Play Back Capable MP3 audio disc can be played back by operating the unit in the same way as the audio CD. 4 H T - 1 8 0 A P E X D I G I T A L Specifications HT-180/OUTPUTS/SUPPLIED ACCESSORIES HT- 180 Power supply 120V AC 60 Hz Power consumption 98W Mass 4.2 kg External dimensions 355mm x 60mm x 345 mm (W/H/D) TV Signal system MULTI/NTSC/PAL Laser Semiconductor laser, wavelength 650 nm SUPPLIED ACCESSORIES RCA cable (yellow, red, and white) 1 Remote control 1 Batteries (AAA) 2 Owner’s manual 1 AM loop antenna 1 FM wire antenna 1 Speakers 5 Woofer 1 Speaker cords 6 FM tuner section System PLL quartz-locked digital synthesizer system Tuning range 87.5-108.00 MHz (100 kHz step) Antenna FM wire antenna Antenna terminals 75 ohms, unbalanced Intermediate frequency 10.7MHz AM tuner section System Tuner section: PLL quartz-locked digital synthesizer system Tuning range 530-1710 kHz (10 kHz interval) Antenna Loop antenna Video section Input Video:1 Vp-p (75 ohms) Outputs Video:1 Vp-p (75 ohms) S-Video: Y:1 Vp-p (75 ohms) C: PAL 0.3 Vp-p (75 ohms) NTSC 0.286 Vp-p (75 ohms) Speakers Rated impedance 4 ohms Dimensions (approx.) 102mmx 97mm x105mm Mass (approx.) 0.57 kg Subwoofer Rated impedance 4 ohms Dimensions (approx.) 350mmx160mmx350mm Mass (approx.) 5.41 kg 4 A P E X D I G I T A L H T - 1 8 0 Check the following guide for a possible correction to a problem before contacting customer service. Check FAQ at our website: Trouble Shooting Guide SYMPTOMS AND CORRECTION Symptom No power No picture No sound Rolling b/w picture Black & White picture The playback picture has occasional distortion Brightness is unstable or noises are produced on playback pictures The HT-180 does not start playback MP3 won’t read disc or it skips The remote control does not work properly Correction • Connect the power plug into the wall outlet securely. • Verify the connection from the DVD video output to the TV video input. Then switch TV to appropriate mode (video 1). • Connect the video cable into the jacks securely. Refer to your television owner’s manual. • Connect the audio cables into the jacks securely. • Verify the connection from the DVD audio output to the TV or receiver audio input. Then switch to the appropriate source on the receiver. Refer to your audio amplifier owner’s manual. • From the Setup Menu select “TV Type”. • Adjust the vertical hold on your TV. • Damaged S-Video connector (bent pin). • A small amount of picture distortion may appear because of a poor quality video/sound transfer to disc. This is especially true of some discs manufactured between 1997-1998.. • Scratched disc...