Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Heimkino-Systeme - HT-ST3 (6.07 mb)
Heimkino-Systeme - HT-ST3 (853.76 kb)
Heimkino-Systeme - HT-ST3 (855.71 kb)
Heimkino-Systeme - HT-ST3 (6.06 mb)
Anleitung Zusammenfassung
POWER The system is not turned on. . Check that the AC power cord (mains lead) is connected securely. The system is turned off automatically. . The “A. STBY” function is working. Set “A. STBY” to “OFF” (refer to “Adjusting the settings” in the Operating Instructions). SOUND No TV sound is output from the system. . Make sure the input source is selected correctly. You should try other input sources by pressing the INPUT button several times (refer to “Listening to the audio” in the Operating Instructions). . Check the connection of the HDMI cable, digital optical cable, or audio cable that is connected to the system and the TV (refer to “Connection” in the Operating Instructions). . Check that “TV” is displayed as the input source on the front panel display. . Check the sound output of the TV. . Check to make sure the TV sound volume is not too low or muted. . When a TV compatible with the Audio Return Channel (ARC) technology is connected with an HDMI cable, check to make sure the cable is connected to the HDMI (ARC) jack of the TV. . If the TV is not compatible with the Audio Return Channel (ARC) technology, connect the digital optical cable in addition to the HDMI cable in order to output sound. The sound is output from both the system and the TV. . Turn off the sound of the system or the TV. Sound lags behind the TV image. . Set “SYNC” to “OFF” if it is set to any of 1 to 4 (refer to “Adjusting the settings” in the Operating Instructions). No sound or only a very low-level sound is heard from the Bar Speaker or the subwoofer. . Press VOL + and check the volume level (refer to “Parts and controls” in the Operating Instructions). . Press MUTING on the remote control or VOL + to cancel the muting function (refer to “Parts and controls” in the Operating Instructions). . Check that the speaker cords of the Bar Speaker are inserted to the subwoofer securely. . Make sure the input source is selected correctly. You should try other input sources by pressing the INPUT button several times (refer to “Listening to the audio” in the Operating Instructions). . Check that the input source is correctly selected. . Check that all the cables and cords of the system and the connected equipment are fully inserted. . Press SW VOL + on the remote control to turn up the volume level of the subwoofer (refer to “Parts and controls” in the Operating Instructions). . A subwoofer is for reproducing bass sound. In the case of input sources that contain very little bass sound components (i.e., a TV broadcast), the sound from the subwoofer may be difficult to hear. continued 11GB Dolby Digital or DTS multi-channel sound is not reproduced. . Check the audio setting of Dolby Digital or DTS format on the Bluray Disc player, DVD player, etc., connected to the system. The surround effect cannot be obtained. . Depending on the input signal and the SOUND MODE setting, surround sound processing may not work effectively...