Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
t Picture/sound quality may be poor depending on Internet content providers. t Picture/sound quality may be improved by changing the connection speed. Sony recommends a connection speed of at least 2.5 Mbps for standard- definition video and 10 Mbps for high- definition video. t Not all videos contain sound. The picture is small. t Press V to zoom in. “BRAVIA” Sync ([Control for HDMI]) The [Control for HDMI] function does not work (“BRAVIA” Sync). t Check that [Control for HDMI] is set to [On] (page 47). t If you change the HDMI connection, turn the system off and on again. t If power failure occurs, set [Control for HDMI] to [Off], then set [Control for HDMI] to [On] (page 47). t Check the following and refer to the operating instructions supplied with the equipment. • The connected equipment is compatible with the [Control for HDMI] function. • The connected equipment’s setting for the [Control for HDMI] function is correct. 56GB Network connection The system cannot connect to the network. t Check the network connection (page 18) and the network settings (page 48). Wireless LAN connection You cannot connect your PC to the Internet after [Wi-Fi Protected Setup (WPS)] is performed. t The wireless settings of the router may change automatically if you use the Wi-Fi Protected Setup function before adjusting the settings of the router. In this case, change the wireless settings of your PC accordingly. The system cannot connect to the network or the network connection is unstable. t Check if the wireless LAN router is on. t Check the network connection (page 18) and the network settings (page 48). t Depending on the usage environment, including the wall material, radio wave reception conditions, or obstacles between the system and the wireless LAN router, the possible communication distance may be shortened. Move the system and the wireless LAN router closer to each other. t Devices that use a 2.4 GHz frequency band, such as a microwave, Bluetooth, or digital cordless device, may interrupt communication. Move the unit away from such devices, or turn off such devices. t The wireless LAN connection may be unstable depending on the usage environment, especially while using the Bluetooth function of the system. In this case, adjust the usage environment. The wireless router you want is not shown in the wireless network list. t Press RETURN to return to the previous screen, and try [Wireless Setup(built-in)] again. If the wireless router you want is still not detected, select [Add a new address.] from the network list, then select [Manual Registration] to input a network name (SSID) manually. Bluetooth device Pairing cannot be done. t Move the Bluetooth device closer to the unit. t Pairing may not be possible if other Bluetooth devices are present around the unit. In this case, turn off the other Bluetooth devices. t Delete the system from your Bluetooth device and perform pairing again (page 26). Connecting cannot be done. t T...