Login:
Stimmen - 0, Durchschnittliche Bewertung: 0 ( )

Anleitung Sony, modell HT-CT660

Hersteller: Sony
Dateigröße: 334.98 kb
Dateiname:
Unterrichtssprache:en
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Dieses Gerät hat auch andere Anweisungen:

Anleitung Zusammenfassung


. Playback operation .* (playback)/.(pause)/ .(stop) Starts/pauses/stops playback. To resume normal playback during pause, press .(pause) again. Note The above explanations are intended to serve as an example only. Depending on the equipment, the above operations may not be possible, or may operate differently than described. Setting manufacturer of controllable TVs 1 While holding down the TV ... button, press the button corresponding to the manufacturer. Manufacturer Button SONY . TV .+ Samsung . TV PROG + . SOUND FIELD + . GAME LG . SOUND FIELD + Panasonic . TV .. Philips . TV PROG . . MOVIE . GAME Sharp . SOUND FIELD . Toshiba . STD 12GB Connecting a TV, player, etc. Connecting a TV, player, etc. Getting Started Connecting a TV If you connect the system to a TV compatible with the Audio Return Channel (ARC) technology via an HDMI input jack with “ARC” indicated, you do not need to connect a digital optical cable. If the digital optical cable has a cap, remove it before connecting the cable. TVDigital optical cable for a TV HDMI cable (not supplied) HDMI IN (ARC) Digital Audio OUT (optical) (supplied) Notes . You can see the letters “ARC” beside the TV’s HDMI jack if it is compatible with the Audio Return Channel (ARC) technology. Even if you connect an HDMI cable to the jack, if the HDMI input jack is not compatible with the Audio Return Channel (ARC) technology, you cannot use the Audio Return Channel (ARC) technology. . The Audio Return Channel (ARC) technology is available only when the Control for HDMI function is set to on. If the Control for HDMI function is set to off, use a digital optical cable. . The HDMI jack connections have priority as the default setting when you connect different equipment to the system using the OPTICAL IN and HDMI IN jacks. continued 13GB Tip . Even if the system is turned off (active standby mode), the HDMI signal will be sent from the connected equipment to the TV via the HDMI connection. You can enjoy image and sound from the equipment on the TV. Connecting equipment with an HDMI jack “PlayStation®3,” Blu-ray Disc™ player, DVD player, satellite tuner, cable television tuner, etc. HDMI cable (not supplied) HDMI OUT Connecting audio equipment Audio cable (not supplied) Audio signal OUT Smartphone, “Walkman,” or other audio equipment Note . When you connect a portable music player, etc. via its headphone jack to the ANALOG IN jack of the system, adjust the volume on the portable music player to eliminate the volume difference when you switch between the portable music player and other input sources. 14GB Positioning the system Positioning the system Installing the Sound Bar . Installing the Sound Bar on a rack . Installing the Sound Bar on a wall (page 16) (page 16) Getting Started Notes . Take following precautions when installing the Sound Bar and the subwoofer. . Do not block the ventilation holes on the rear panel. . Do not place the Sound Bar and the subwoofer in a metal cabinet. . Do not place an object such as an aquarium between the Sound Bar and the subwoofer. . Place the subwoofer close to the Sound Bar in a same room. . When the Sound Bar is placed in front of a TV, the TV may not be controlled with the remote control of the TV. In that case, place the Sound Bar away from the TV. If the remote control of the TV still cannot control the TV, set “IR REP” of the AMP menu to “ON” (page 28). . Make sure that the remote control of the TV cannot control the TV, then set “IR REP” to “ON”. If it is set to “ON” when the remote control can control the TV, appropriate operation may not be obtained, because of the interference between the direct command from the remote control and the command via the Sound Bar. continued 15GB Installing the Sound Bar on a rack Installing the Sound Bar on a rack 1 Attach a side stand (for front- facing installation) to each side. To install the Sound Bar tilting upward 1Remove the center stand. Center stand 2 Attach a side stand (for upward- tilting installation) to each side. Installing the Sound Bar on a wall You can install the Sound Bar on the wall. Notes . Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach the screws securely to a wall beam. Install the Sound Bar on a vertical and flat reinforced area of the wall. . Be sure to subcontract the installation to Sony dealers or licensed contractors and pay special attention to safety during the installation. . Sony is not responsible for accidents or damage caused by improper installation, insufficient wall strength, improper screw installation or natural calamity, etc. 16GB 1 1 Sound Bar to the screws, then hang the Sound Bar onto the 4 mm 2screws. More than 25 mm 5mm 9mm Setting up the Wireless Hole on the back of the Sound Bar System 2 Fasten the screws to the wall. The Sound Bar transmits sound from The screws should protrude 6 to the equipment to the subwoofer by 7 mm. wireless communication. 680 mm 6 to 7 mm 3 Remov...


Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien