Stimmen - 1, Durchschnittliche Bewertung: 4
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
When in the DMR mode, such operations as playing and stopping files can be performed from the external controller. Volume adjustment and the muting control are also possible. Note • Depending on the external controller being used, playback may be interrupted when the volume is adjusted from the controller. In this case, adjust the volume from the receiver or remote control. Using AirPlay on iPod touch, iPhone, iPad and iTunes AirPlay works with iPhone, iPad, and iPod touch with iOS 4.3.3 or later, Mac with OS X Mountain Lion, and Mac and PC with iTunes 10.2.2 or later. To use AirPlay, select your receiver on your iPod touch, iPhone, iPad or in iTunes and start playback. For more information, see the Apple website ( http:/ / . • Adjustment of the receiver's volume from iPod touch, iPhone, iPad or iTunes. • Pause/resume, next/previous track, and shuffle/repeat from the remote control of the receiver. The display will not show the Play Status, Repeat, or Shuffle icons. • Display of the currently playing track information on the receiver's display, including artist, song/album name and album artwork. It may not be displayed other than song name. Tip • A network environment is required to use AirPlay. • The receiver's name that shows up in the AirPlay UI on iPod touch, iPhone, iPad and iTunes can be changed by Friendly Name from Network Setting. • AirPlay provided on this receiver has been developed and tested based on the software versions for the iPod touch, iPhone, iPad and the software versions for iTunes that are indicated on the Pioneer website. AirPlay may not be compatible with iPod touch, iPhone, iPad or iTunes software versions other than those indicated on the Pioneer website. About the DHCP server function To play back audio files stored on components on the network, you must turn on the DHCP server function of your router. In case your router does not have the built-in DHCP server function, it is necessary to set up the network manually. Otherwise, you cannot play back audio files stored on components on the network or listen to Internet radio stations. See Network setting on page 24 for more on this. Authorizing this receiver This receiver must be authorized to enable playback. The receiver is automatically authorized when it is connected to a PC over a network. If not, please authorize this receiver manually on the PC. The authorization (or permission) method for access varies depending on the type of server currently being connected. For more information on authorizing this receiver, refer to the instruction manual of your server. Playing audio files stored on PCs or other components Connecting to the LAN network Be sure to connect PC or other components to the network using the LAN interface before you use this function. For details on the connections, see page 10. Playback with Music Server Important • You cannot access a PC on a network while you are logged onto a domain that is configured in a Windows network environment. Instead of logging onto the domain, log onto the local machine. • There are cases where the time elapsed may not be correctly displayed. 1 Press NETWORK repeatedly to select Music Server. All available servers are shown on the display. “Please wait” will be displayed until an available server is found. 2 Use ./ . to select the server that the file you want to play is stored on, then press ENTER. The folders/files stored on the server are shown on the display. 99 99 Music server 3 Use ./ . to select the file you want to play, then press ENTER. Playback starts. .Music Server Song 1 Artist Album FLAC 44.1 kHz/24 bit 44:38 - 44:02 • When the file you want to play is in the folder, select the folder first. • If you press RETURN during playback, the previous (folders/files) screen will be displayed. • To add your favorite file to Favorites function, press +Favorite on the remote control. • Check your network environment if “Please wait” continues to be displayed. 1010 1010 Using the tuner Listening to the radio broadcasts The following steps show you how to tune in to FM and AM radio broadcasts using the automatic ( search) and manual ( step) tuning functions. Once you are tuned to a station you can memorize the frequency for recall later. See Saving station presets below for more on how to do this. TOP iPod BT Audio iPod USB TUNER AUDIO INNETWORK CD LINE + Favorite PTY SETUP TUNE PRESETPRESET TUNE ENTER MENU CONTROL VOLUME SOUND P.BASS TREBLE BAND CD DISP DIMMER BASS RETURN RDS DISP MUTE 1 Press TUNER to select the tuner. 2 Use BAND to change the band (FM or AM), if necessary. Each press switches the band between FM (stereo or mono) and AM. 3 Tune to a station. There are 2 ways to do this: Automatic tuning To search for stations in the currently selected band, press and hold TUNE ./. for about a second. The receiver will start searching for the next station, stopping when it has found one. Repeat to search for other stations. Manual tuning To change the frequency o...
Dieses Handbuch ist für folgende Modelle:Heimkino-Systeme - X-HM71-S (5.06 mb)
Heimkino-Systeme - X-HM81-K (5.06 mb)
Heimkino-Systeme - X-HM81-S (5.06 mb)
Heimkino-Systeme - XC-HM81-K (5.06 mb)