Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
Repeat this step to select tracks as many as you can. Selects all the tracks on an Audio CD. Selects an encoding option from the pop-up menu (128kbps, 192kbps, 320kbps) Cancels the recording and returns to the previous screen. 6. Use W/S/A/D to select [Start], and press ENTER (b). 7. Use W/S/A/D to select a destination folder to be copied. If you want to create a new folder, use W/S/A/D to select [New Folder] and press ENTER (b). Enter a folder name using virtual keyboard, and press ENTER (b) while [OK] is selected. 8. Use W/S/A/D to select [OK], and press ENTER (b) to start Audio CD recording. If you want to stop in progressing Audio CD recording, press ENTER (b) while [Cancel] is highlighted. 9. A message appears when Audio CD recording is completed. Press ENTER (b) to check the music file created in the destination folder. yyThe table below shows the average recording time from an audio track with 4 minutes of playback time to a music file with 192 kbps as an example. stop modewhile playback1 min.4 min. yyRecording times in the table above are approximate. yyActual recording time for USB storage device varies depending on the USB storage device’s ability. yyMake sure that there is minimum of 50 MB free space is needed when recording into the USB storage device. yyThe length of the music should be longer than 20 seconds for the proper recording. yyDo not turn off this player or extract the connected USB storage device during Audio CD recording. ,,Note The recording or copying features on this player are provided for your personel and noncommercial use. The making of unauthorized copies of copy-protected material, including computer programs, files, broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal offense. This equipment should not be used for such purposes. LG expressly disclaims any responsibility for illegal distribution or use of unauthorized content in commercial purpose. Be ResponsibleRespect Copyrights>>Caution Displaying MP3 music information (ID3 Tag) 1. Select a music file using W/S/A/D. 2. Press INFO/DISPLAY (m) to display the option menu. 3. Select [Information] option using W/S, and press ENTER (b). 4. The music information will be displayed on the screen. Depending on the MP3 files, information may not be displayed on the screen. ,,Note Radio Operations Be sure that the antenna is connected. (Refer to the page 20) Listening to the radio 1. Press RADIO&INPUT (P) until TUNER (FM) appears in the display window. The last received station is tuned in. 2. Press and hold TUNING (-/+) for about two seconds until the frequency indication starts to change. Scanning stops when the unit tunes in a station. Or Press TUNING (-/+) repeatedly. 3. Adjust the volume by rotating VOLUME on the front panel or by pressing VOL (+/- ) on the remote control. Presetting the Radio Stations You can preset 50 stations for FM. Before tuning, make sure that you have turned down the volume. 1. Press RADIO&INPUT (P) until the TUNER (FM) appears in the display window. 2. Select the desired frequency by using TUNING (-/+). 3. Press ENTER (b) a preset number will flash in the display window. 4. Press PRESET (-/+) to select the preset number you want. 5. Press ENTER (b). The station is stored. 6. Repeat the steps 2 to 5 to store other stations. Deleting all the saved stations Press and hold CLEAR for two seconds. “ERASE ALL” will flash up. Then all the saved stations are deleted. Deleting a saved station 1. Press PRESET - / + to Select a preset number you want to delete. 2. Press CLEAR, the preset number will blink in the display window. 3. Press CLEAR again, to delete the selectd preset number. Improving poor FM reception Press B (blue) (MONO/STEREO) coloured button on the remote control. This will change the tuner from stereo to mono and usually improve the reception. See information about a radio station The FM tuner is supplied with the RDS (Radio Data System) facility. This shows information about the radio station being listened to. Press RDS repeatedly to cycle through the various data types: PS (Programme Service Name) The name of the channel will appear in the display PTY (Programme Type Recognition) The programme type (e.g. Jazz or News) will appear in the display. RT (Radio Text) A text message contains special information from the broadcast station. This text may scroll across the display. CT (Time controlled by the channel) This shows the time and date as broadcast by the station. Enjoying the NetCast™ Entertainment Access You can use various content services via Internet with the NetCast Entertainment Access feature. 1. Check the network connection and settings (page 22). 2. Press HOME (n). 3. Select the [NetCast] using A/D, and press ENTER (b). 4. Select an option using W/S/A/D, and press ENTER (b). yyDetailed information of each service, contact to the content provider or visit support link of the service. yyThe content of NetCast services and service related informa...