Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
[Speaker selection] Select a speaker that you want to adjust. NOTE Certain speaker settings are prohibited by the Dolby Digital licensing agreement. [Size] Since the speaker settings are fixed, you cannot change the settings. [Volume] Press I i to adjust the output level of the selected speaker. 3 Audio 5.1 Speaker Setup Make the following settings for the built-in 5.1 channel surround decoder. 1. Select [5.1 Speaker Setup] on the [Audio] menu. 2. Press • ENTER. The [5.1 Speaker setup] appears. 3. Use I i to select the desired speaker. 4. Adjust options using U u I i buttons. 5. Returns to the previous menu by pressing O RETURN. Front L/R : 0 ~ -5 SubWoofer, Rear L/R, Center : 5 ~ -5 [Distance] After you connected speakers to your unit, set the Distance between the speakers and your listening point if the distance of Center or Rear speakers is bigger than the distance of Front speakers. This allows the sound from each speaker to reach the listener at the same time. Press I i to adjust the Distance of the selected speaker. This distance is equivalent to a difference of the distance between Center or Rear speaker and Front speakers. [Test] Select [Speaker Test Start] by using the U u and press • ENTER. Press • ENTER again to stop. Adjust the volume to match the volume of test signals memorized in the system. Installation Installation DRC (Dynamic Range Control) Make the sound clear when the volume is turned down (Dolby Digital only). Set to [On] for this effect. Vocal Select [On] to mix karaoke channels into normal stereo. This function is effective for multi-channel karaoke DVDs only. HD AV Sync Sometimes Digital T V encounters a delay 3 Installation between picture and sound. If this happens you can compensate by setting a delay on the sound so that it effectively ‘waits’ for the picture to arrive: this is called HD AV Sync. Use U u (on the remote control) to scroll up and down through the delay amount, which you can set at anything between 0 and 300m sec. Lock (Parental Control) Initial Setting the Area Code: When you use this unit for the first time, you have to set the Area Code. 1. Select the [Lock] menu and then press i. 2. Press i. To access the [Lock] options, you must input the password you have created. Input a password and press • ENTER. Enter it again and press • ENTER to verify. If you make a mistake before pressing • ENTER, press CLEAR. 3. Select the first character using U u buttons. 4. Press • ENTER and select the second character using U u buttons. 5. Press • ENTER to confirm your Area code selection. Rating Blocks playback of rated DVDs based on their contents. Not all discs are rated. 1. Select [Rating] on the [Lock] menu then press i. 2. Input a password and press • ENTER. 3. Select a rating from 1 to 8 using the U u buttons. [Rating 1-8] Rating one (1) has the most restrictions and rating eight (8) is the least restrictive. [Unlock] If you select unlock, parental control is not active and the disc plays in full. 4. Press • ENTER to confirm your rating selection. Installation Password You can enter or change password. 1. Select [Password] on the [Lock] menu and then press i. 2. Input a password and press • ENTER. To change the password, press • ENTER when the [Change] option is highlighted. Input a password and press • ENTER. Enter it again and press • ENTER to verify. 3. Press HOME to exit the menu. NOTE Others DivX VOD We provide you with the DivX® VOD ( Video On Demand) registration code that allows you to rent and purchase videos using the DivX® VOD service. For more information, visit Press • ENTER when [DivX(R) VOD] is highlighted and you can view the registration code of the unit. NOTE If you forget your password, you can clear it using All the downloaded videos from DivX VOD can the following steps: only be played back on this unit. 1. Select the [Setup] menu on the [Home] menu. 2. Input the 6-digit number “210499” and press • ENTER. The password is cleared. Area Code Enter the code of the area whose standards were used to rate the DVD video disc, based on the list on page 41. 1. Select [Area Code] on the [Lock] menu then press i. 2. Input a password and press • ENTER. 3. Select the first character using U u buttons. 4. Press • ENTER and select the second character using U u buttons. 5. Press • ENTER to confirm your Area code selection. 3 Installation Operation 4 Operation 4 Operation Using the Home Menu 1. Press HOME. Displays the [Home] menu. 2. Select an option by using I i. 3. Press .ENTER then selected option menu. [Music] – Displays [MUSIC] menu. [Movie] – Start video media’s playback or displays the [MOVIE] menu. [Photo] – Displays [PHOTO] menu. [Setup] – Displays the [Setup] menu. NOTE You can not select the [Music], [Movie] or [Photo] option when the USB device is not connected or a disc is not inserted. Basic Operations 1. Insert the disc by using the ZOPEN/ CLOSE or Connect the USB device to the USB port. 2. Press HOME. Displays the [Home] Menu. 3. Sel...