Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by adding a delay effect to the sound of the Center and Surround Speakers. Ideal CENTER SPEAKER placement Df: The distance from FRONT SPEAKER Dc: The distance from CENTER SPEAKER Ds: The distance from SURROUND SPEAKER It is desirable to place all speakers within this circle. Ideal SURROUND SPEAKER placement Setting CENTER SPEAKER If the distance of Dc is equal to or longer than the distance of Df in the figure, set the mode as 0ms. Otherwise, change the setting according to the table. SETUP Distance between Df and Dc 0.00 m 0.34 m 0.68 m 1.02 m 1.36 m 1.70 m Delay Time 0 ms 1 ms 2 ms 3 ms 4 ms 5 ms Setting REAR (SURROUND) SPEAKERS If the distance of Df is equal to the distance of Ds in the figure, set the mode as 0ms. Otherwise, change the setting according to the table. Distance between Df and Dc 0.00 m 1.02 m 2.04 m 3.06 m 4.08 m 5.10 m Delay Time 0 ms 3 ms 6 ms 9 ms 12 ms 15 ms • With (Dolby Pro Logic II), the delay time may be different for each mode. • With AC-3 and DTS, the delay time can be set between 00 and 15mSEC. • The Center channel is only adjustable on 5.1 channel discs. 1 11 Settings (Con’t) Setting the Test Tone Use the Test Tone feature to check the speaker connections. MOVE ENTER EXITRETURN STOP EXIT 1 In Stop mode, press the MENU button. Press the Cursor % button to move to
