Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
If for example the file name of the movie is ‘Movie.avi’, then you will need to name the text file ‘Movie.sub’ or ‘Movie.srt’. [Version Info.] Displays the software version of this Home Theatre System. Tip • This information is required when you want to find out if a newest software version is available at the Philips website that you may download and install on this Home Theatre System. [Default] Resets all the settings of this Home Theatre System to factory default, except for [Disc Lock], [Password] and [Parental] settings. 28 EN 8 Additional Information Update software To check for new updates, compare the current software version of your Home Theatre System with the latest software version (if available) at the Philips website. Preferences Disc Menu Parental PBC MP3/JPEG Display Password DivX Subtitle Version Info. Default 1 Press SETUP. 2 Select [Preferences] > [Version Info.], then press OK. 3 Write down the version number, then press SETUP to exit the menu. 4 Go to t to check the latest software version available for this Home Theatre System. 5 If the latest software version is higher than the sof tware version of this Home Theatre System, download it and store onto a CD-R or USB fl ash drive. 6 Inser t the CD-R or USB flash drive to this Home Theatre System. 7 Press DISC or USB, then follow the instruction on the T V to confi rm update operation. » Once software update is complete, this Home Theatre System turns off to standby automatically. Note • Do not remove the CD-R or USB when sof tware updating is in progress. 8 Disconnect the power cord for a few seconds and connect again to reboot the system. Care Caution • Never use solvents such as benzene, thinner, cleaners available commercially or anti-static sprays intended for discs. Clean discs Wipe the disc with a micro fibre cleaning cloth from the centre to the edge in a straight line movement. Clean main unit screen Wipe the screen surface with a micro fibre cleaning cloth. Additional English EN 29 9 Specifications Note • Specification and design are subject to change without notice Playback media • DVD-Video, DVD+R/+RW, DVD-R/RW, DVD+R DL, CD-R/CD-RW, Audio CD, Video CD/SVCD, Picture CD, MP3CD, WMA-CD, DivX-CD, USB flash drive Amplifier • Total output power: • Home Theatre mode: 200 W • Frequency response: 63 Hz~14 kHz / ±3 dB • Signal-to-noise ratio: > -60 dB (A-weighted) • Input sensitivity: • AUX: 500 mV • •• SCART TO TV: 500 mV Disc • Laser Type: Semiconductor • Disc diametre: 12 cm / 8 cm • Video decording: MPEG1/ MPEG2 / DivX / DivX Ultra • Video DAC: 12 bits, 108 MHz • Signal system: PAL / NTSC • Video S/N: 56 dB • Audio DAC: 24 bits / 96 kHz • Frequency response: • 4 Hz–20 kHz (44.1 kHz) • 4 Hz–22 kHz (48 kHz) • 4 Hz–44 kHz (96 kHz) • PCM: IEC 60958 • Dolby Digital: IEC 60958, IEC 61937 Radio • Tuning range: FM 87.5–108 MHz (50 kHz) • 26 dB quieting sensitivity: FM 22 dBf • IF rejection ratio: FM 50 dB • Signal-to-noise ratio: FM 30 dB • Harmonic distortion: FM 3% • Frequency response: FM 180 Hz~10 kHz / ±3 dB • Stereo separation: FM 26 dB (1 kHz) • Stereo Threshold: FM 23.5 dB USB • Compatibility: USB 1.1 • Class support: UMS (USB Mass Storage Class) • File system: FAT12, FAT16, FAT32 Main Unit • Power supply: 220~240 V; ~50 Hz • Power consumption: 50 W • Standby power consumption: < 1 W • Dimensions (WxHxD): 360 x 48 x 332 (mm) • Weight: 2.64 kg Speakers • System: full range satellite • Speaker impedance: 8 ohm (centre), 4 ohm (Front/Rear) • Speaker drivers: 3” full range • Frequency response: 150 Hz - 20 kHz • Dimensions (WxHxD): • Centre: 100 x 100 x 75 (mm) • Front/Rear: 100 x 100 x 75 (mm) • Weight: • Centre: 0.38 kg • Front/Rear: 0.38 kg/each Subwoofer • Impedance: 8 ohm • Speaker drivers: 165 mm (6.5”) woofer • Frequency response: 45 Hz ~ 150 Hz • Dimensions (WxHxD): 122.6 x 309.5 x 369 (mm) • Weight: 3.54 kg 30 EN Laser specifi cation • Type: Semiconductor laser GaAIAs (CD) • Wave length: 645 - 665 nm (DVD), 770 - 800 nm (CD) • Output power: 6 mW (DVD), 7 mW (VCD/CD) • Beam divergence: 60 degrees. Specifi cations English EN 31 10 Troubleshooting Warning • Risk of electric shock. Never remove the casing of the Home Theatre System. To keep the warranty valid, never tr y to repair the system yourself. If you encounter problems when using the Home Theatre System, check the following points before requesting ser vice. If the problem remains unsolved, register your Home Theatre System and get suppor t at welcome. If you contact Philips, you will be asked for the model and serial number of your Home Theatre System. The model number and serial number are on the back or bottom of your Home Theatre System. Write the numbers here: Model No. __________________________ Serial No. ___________________________ Main unit The buttons on this Home Theatre System do not work. • Disconnect this Home Theatre System from the power outlet for a few minutes, then connect again. Picture No picture. • See TVs manu...