Stimmen - 0, Durchschnittliche Bewertung: 0 ( )

Hersteller: Philips Dateigröße: 1.15 mb Dateiname: Unterrichtssprache:

Play a musical slideshow Play music and pictures simultaneously to create a musical slideshow. The files must be stored on the same disc or USB storage device. 1 Select a music track, then press OK. 2 Press BACK and go to the picture folder. 3 Select a picture, then press OK to star t slideshow. 4 Press to stop slideshow. 5 Press again to stop music. Synchronize audio with video If the audio and video are not synchronized, you can delay the audio to match the video. 1 Press and hold AUDIO SYNC until the audio sync message appears on the display panel. 2 Press +/-within five seconds to sync the audio with your video. Quick skip play to a specific time Quick skip to a specific par t of a video by entering the time of a scene. 1 During video play, press INFO. 2 Press the Navigation buttons and OK to select: • [TT Time] : Title time. • [Ch Time] : Chapter time. • [Disc Time] : Disc time. • [Track Time] : Track time. 3 Enter the time of the scene, then press OK. Play from radio The home theater can store up to 40 radio stations. 1 Check that the FM antenna is connected. 2 Press RADIO. » “AUTO INSTALL...PRESS PLAY’ appears on the display panel if you have not installed any radio stations. Press . 3 Press the following buttons to control play: Button Action Selects a preset radio station. / / Searches for a radio station. Fine tunes a radio frequency. Press and hold to erase the preset radio station. Press to stop the installation of radio stations. PROGRAM Manual: Press once to access program mode, and press again to store the radio station. Automatic: Press and hold for five seconds to reinstall radio stations. 12 EN Note • AM and digital radio are not suppor ted. • If no stereo signal is detected, you are prompted to install the radio stations again. • For the best reception, place the antenna away from the TV or other sources of radiation. Play audio from TV or other devices Press AUDIO SOURCE repeatedly to select the audio output of the connected device (see ‘Connect audio from TV or other devices’ on page 10). Create MP3 audio files Use the home theater to conver t audio CDs into MP3 audio files. 1 Inser t an audio CD (CDDA/HDCD) into the home theater. 2 Connect a USB storage device to the home theater. 3 When audio is played, press CRE ATE MP3. 4 Select [ Yes] and press OK to confirm. CREATE MP3 OPTIONS TRACK Speed Normal Track01 04:14 Track02 04:17 Track03 03:58 Track04 04:51 Track05 03:53 Track06 04:09 Track07 04:38 Bitrate 128kbps CRT ID3 Yes Device USB1 SUMMARY Select Track 0 Time 00:00 Start Exit Select All Deselect All 5 Select the settings in the [OPTIONS] panel, then press OK. • [Speed] : Selects the write-to-file speed. • [Bitrate] : Selects the conversion quality. • [CRT ID3] : Copies information on the tracks in the MP3 files. • [Device] : Selects the USB device which you use to store the MP3 files. 6 Press to access the [TR ACK] panel. 7 Select an audio track, then press OK. • [Select All] : Selects all tracks. • [Deselect all] : De-selects all tracks. 8 Select [Start] in the menu to conver t, then press OK. » A new folder is created in the USB storage device to store all the new MP3 audio files. • To exit the menu, select [Exit] and press OK. Note • During the conversion process, do not press any buttons. • DTS CDs and copy-protected CDs cannot be conver ted. • Write-protected or password-protected USBstorage device cannot be used to store MP3 files. English EN 13 6 Change settings This section helps you to change the settings of your home theater. Caution • Most of the settings are already configured with the best value for the home theater. Unless you have a specific reason to change a setting, it is best to leave it at the default value. Access the setup menu 1 Press SETUP. » The following menu appears. Symbol Description [General Setup] [Audio Setup] [Video Setup] [Preference Setup] 2 Select a setup menu, then press OK. See the following sections for information about how to change the settings of your home theater. 3 Press BACK to return to the previous menu, or press SETUP to exit. Note • You cannot change a setting that is grayed out. Change general settings 1 Press SETUP. 2 Select [General Setup], then press OK. 3 Select and adjust the following settings: • [Disc Lock] : Restricts play to disc. Password (PIN code) is required to unlock the disc before play. • [Display Dim] : Changes the brightness of the display panel. • [OSD Language] : Selects the on- screen display menu language. • [Screen Saver] : Enables or disables screen saver mode. If enabled, the screen enters idle mode af ter 10 minutes of inactivity (for example, in pause or stop mode). • [Sleep Timer] : Sets a sleep timer to switch the home theater to standby af ter a specific time. • [Auto Standby] : Enables or disables auto standby. If enabled, the home theater switches to standby after 30 minutes of inactivity (for example, in pause or stop mode). • [DivX(R) VOD Code] : Displays the DivX VOD registration code for the home...

Herunterladen

Geben Sie zwei Ziffern: