Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Fotos und technische Daten Yamaha YHT-594 |
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
SURROUND ANTENNA FM GND AM COMPONENT VIDEO PR PB Y OPTICAL (TV ) AV 1 AV 2 AV 3 AV 4 AV 5 AUDIO 1 AUDIO 2 COAXIAL (CD) COAXIAL OPTICAL VIDEO CENTERSURROUND HDMI 1 HDMI 2 HDMI 3 HDMI 4 FRONT COMPONENT VIDEO MONITOR OUT PR PB Y MONITOR OUT AV OUT SUBWOOFER AUDIO OUT SPEAKERS (BD/DVD) HDMI OUT ( ) AV 4 OPTICAL COMPONENT VIDEO Y OPTICAL AV 1 AV 2 AV 3 AV 5 COAXIAL (CD) COAXIAL VIDEO COAXIAL Connecting your portable 5 music player AV Receiver Portable music player CONTROL PROGRAM STRAIGHTINPUT VIDEO AUDIO PORTABLE VIDEO AUX VOLUME SCENE VIDEO AUDIO PORTABLE VIDEO AUX Use a 3.5 mm stereo mini plug cable (not included) to connect your portable music player to the AV Receiver’s PORTABLE jack (on the front panel), as shown. ¦ Almost Finished • Connect the AV Receiver, subwoofer, and your other AV components to suitable AC outlets. • Turn on the AV Receiver first, then the subwoofer and your other AV components. • Install the batteries in the AV Receiver’s remote control. • The optimum crossover frequency setting on the AV Receiver is 160 Hz. • See the relevant owner’s manuals for full operating instructions. Time to enjoy your Yamaha Home Theater Package! Now, relax and enjoy the great sound of your Yamaha Home Theater Package. English If your AV Receiver has a DOCK jack (U.S.A. and Canada models), you can connect a Yamaha Universal Dock for iPod, such as the YDS-12, or a Yamaha Bluetooth Wireless Audio Receiver, such as the YBA-10 (both sold separately). See the AV Receiver’s Owner’s Manual for more information. 5 En Using the subwoofer Using the subwoofer 4321Rear panel a Power indicator Lights up when the POWER switch is set to ON; goes off when the POWER switch is set to OFF. b INPUT jack Input jack for connecting the line-level subwoofer output on your amplifier. c VOLUME control Adjusts the volume of the subwoofer. Turn it clockwise to increase the volume; counterclockwise to decrease the volume. d POWER switch Set this to ON to turn on the subwoofer. Set it to OFF to turn off the subwoofer. Frequency characteristics Setting the subwoofer volume The very first time you use the subwoofer, you need to set the volume balance between the subwoofer and the front speakers as follows. 1 Turn on your other AV components. 2 Set the subwoofer’s VOLUME control to minimum (0). 3 Set the subwoofer’s POWER switch to ON. The power indicator on the rear panel lights up. 4 Play an audio source that contains low-frequency bass sounds. Set the amplifier’s volume control to a suitable level. 5 Turn the subwoofer’s VOLUME control up gradually until you achieve a good balance between the subwoofer and the other speakers. Notes • Once the subwoofer volume has been set, you can leave the subwoofer’s VOLUME control set as it is and use your amplifier’s volume control to adjust the volume of the entire system. • If you replace the front/center speaker (NS-BR300) with other speakers, you will need to re-adjust the subwoofer’s volume. • The frequency characteristics graphs below show how the subwoofer and front speakers work together to provide a full-range sound. The following graph shows the frequency characteristics of the subwoofer (NS-SW280). 100 dB 90 80 70 60 50 40 20 50 100 200 500 Hz The following graph shows the combined frequency characteristics of the subwoofer (NS-SW280) and front/center speaker (NS-BR300), and surround speaker (NS-B285). 100 dB 100 dB 90 90 80 80 70 70 60 60 50 50 40 40 NS-SW280 NS-B285 20 50 100 200 500 Hz NS-SW280 NS-BR300 20 50 100 200 500 Hz 6 En Wall-mounting the speakers Wall-mounting the speakers You can mount the speakers on the wall as follows. Unless you are very competent at DIY, do not wall-mount the speaker yourself. Ask your dealer or a qualified contractor to do the installation for you. Incorrect installation may cause the speaker to fall, causing damage or injury. • Surround speakers (NS-B285) 1 Install screws into a solid wall or wall support, as shown below. Use 3.5 to 4 mm (1/8") diameter self- tapping screws. 2 Hang each speaker by its keyhole slots onto the protruding screws. Note • Make sure the shaft of the screw is seated in the narrow part of the keyhole slot. Otherwise, the speaker may fall. 45 mm (1-3/4") Wall/wall support 6 mm (1/4") Minimum 20 mm (3/4") NS-B285 • Front/center speaker (NS-BR300) 1 Use tape or thumbtacks to affix the supplied mounting template to the wall, and use a pencil or other tool to mark the hole positions on the wall. Mounting Tape or thumbtacks Mark here template 2 Remove the template, and then install screws, as shown below. Use 3.5 to 4 mm (1/8") diameter self- tapping screws. 4 to 6 mm (3/16" to 1/4") Diameter: 7 to 9 mm or more (#8, 1/4" to 3/8" or more) 3 Hang the speaker by its keyhole slots onto the protruding screws. Note • Make sure the shaft of each screw is seated in the narrow part of each keyhole slot. Otherwise, the speaker may fall. Cautions • The front/center speaker (NS-BR300) weighs 1.5 kg (3 lbs.). The surround speakers (NS-B285) weigh...