Anleitung Samsung, modell HT-TX500
Hersteller: Samsung
Dateigröße: 2.81 mb
Dateiname:
Unterrichtssprache:
|
 
|
|
|
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
into the duct (hole) of the subwoofer speaker. • Do not hang the subwoofer on the wall through the duct (hole). Subwoofer SW • The position of the subwoofer is not so critical. • If you place a speaker near your TV set, screen color may be distorted because of the magnetic field generated Place it anywhere you like. by the speaker. If this occurs, place the speaker away from your TV set. 16 17 GB CONNECTIONS 19 Connecting the Optional Wireless Receiving Amplifier 18 Connecting the Speakers (Con’t) POWER ON OFF AUDIO IN CROSS OVER Front Speaker (R) Rear Speaker (L) Rear of Subwoofer Center Speaker Front Speaker (L) Rear Speaker (R) WIRELESS RECEIVER MODULE 1 Connect the front and center speakers to the Subwoofer, referring to pages 16~18. 2 With the DVD Player turned off, insert the TX card into the TX Card Connection(WIRELESS) on the side of the main unit. Hold the TX card so that the slanted side faces upward and insert the card into the port. The TX card enables communication between the subwoofer and the wireless receiver. 3 Connect the left and right rear speakers to the wireless receiving module. 4 Plug the power cord of the wireless receiving module in the wall outlet and switch the power switch . • Do not insert a card other than the TX card dedicated for the product. The product might be damaged or the card may not be removed easily. • Do not insert the TX card upside down or in the reverse direction. • Insert the TX card when the DVD Player is turned off. Inserting the card when it is turned on may cause a problem. • If the TX Card is inserted, sound is not output from the Rear Speaker connectors on the subwoofer. Slanted side face up TX card Connecting the Main Unit and Subwoofer POWER ON OFF AUDIO IN CROSS OVER AUDIO IN Rear of Subwoofer Rear of Main unit To connect the rear speakers wirelessly, you have to purchase the wireless receiving module and TX card from your Samsung retailer. When you have Purchased the Wireless Receiving Module (SWA-3000) Subwoofer: With the built-in, dedicated 165W amplifier, the subwoofer generates rich bass sounds. Crossover: The Crossover sets the cutoff frequency for the subwoofer. Set the Crossover control for the best bass response in your room. Subwoofer Functions POWER ON OFF AUDIO IN CROSS OVER 4 2 3 1 1 Power button 2 External Audio Input Connector 3 Crossover Controller 4 Speaker Output Terminals Use the system cable to connect the AUDIO OUT port of the main unit to the AUDIO IN port of the subwoofer. Connecting the Optional Wireless Receiving Amplifier (Con’t) Resetting the Wireless Receiving Module Reset the system if a communication failure occurs, or if the Link indicator (blue LED) on the wireless receiver does not light up and the "REAR CHECK" message blinks on the main unit's display. Reset the system while the main unit and the wireless receiver module (SWA-3000) are in Power Standby mode. 1 With the main unit turned off, press and hold the remote control's REMAIN button for 5 seconds. ¦ The STANDBY LED on the front panel of the wireless receiver module blinks. 2 With the wireless receiver module turned on, use a ball point pen or a toothpick to press the RESET button on the back of the unit. ¦ The STANDBY LED on the front panel of the wireless receiver module blinks 2 Times. 3 Press and hold the Power button on the home theater system for more than 1 second to turn it on. ¦ The LINK LED of the wireless receiver module is lit and the Reset is completed. If Power Standby mode continues, repeat Steps 1 to 3 above. • When the wireless receiving module setting is complete, no audio signal is output from the Rear Speaker Output Connector on the back of the subwoofer. • The wireless receiving antenna is built into the wireless receiver module. Keep the unit away from water and moisture. • For optimal listening performance, make sure that the area around the wireless receiver module location is clear of any obstructions. • Sound will be heard from the wireless rear speakers in DVD 5.1-CH or Dolby Pro Logic II mode only. • In 2-CH mode, no sound will be heard from the wireless rear speakers. • Place the wireless receiver module at the rear of the listening position. If the wireless receiver module is too close to the main unit, some sound interruption may be heard due to interference. • If you use a device such as a microwave oven, wireless LAN Card, Bluetooth equipment, or any other device that uses the same frequency (2.4GHz) near the system, some sound interruption may be heard due to interference. • The transmission distance of a radio wave is about 10m, but may vary depending on your operating environment. If a steel-concrete wall or metallic wall is between the main unit and the wireless receiver module, the system may not operate at all, because the radio wave cannot penetrate metal. Connecting the Video Out to your TV GB Choose one of the three methods for connecting to a TV. CONNECTIONSMETHOD 2 METHOD 3 (supplied) METHOD 1 (supplied) METHOD 1 :...
