Stimmen - 4, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
DAB reception frequency (only band III) 180.064MHz 194.064MHz 208.064MHz 222.064MHz 235.776MHz 181.936MHz 195.936MHz 209.936MHz 223.936MHz 237.488MHz 183.648MHz 197.648MHz 211.648MHz 225.648MHz 239.200MHz 185.360MHz 199.360MHz 213.360MHz 227.360MHz 187.072MHz 201.072MHz 215.072MHz 229.072MHz 188.928MHz 202.928MHz 216.928MHz 230.784MHz 190.640MHz 204.640MHz 218.640MHz 232.496MHz 192.352MHz 206.352MHz 220.352MHz 234.208MHz 41P~78P(DS470)-GB 9/16/04 9:34 AM Page 67 Remote Control Unit Press TUNER/ Select the BAND to select service. 12 "DAB". • Each time you press the • Press to select the button, the mode changes as service and press to follows: FM . MW . DAB. change the ensemble. Main Unit Press FUNCTION Select the 12 to select "DAB". service. • Press to select the service. • If "NO SERVICE" appears on the display, press and hold TUNE for longer than 2 seconds. "AUTO TUNE" blinks on the display and all available services will be searched. If "NO SERVICE" continues to be displayed after the service search has finished, make sure you are not in a non-reception area and check the antenna connection. About Ensemble and Service • For each ensemble, there are various services such as audio and data. If you press when there are many ensembles, you can easily search services. RADIO OPERATION 67 Storing DAB Stations You can store up to 6 DAB stations. • Press to change the ensemble. 1 2 • Each time you press the button, the mode changes as follows: FM . MW . DAB. • "PRGM" will blink on the display. 3 Example: Storing the service name "ALPHA1" to the service number 3 Press to select the service. Press TUNER (BAND) to select "DAB". • "PRGM" disappears from the display and the station will be stored. • Press the TUNER MEMORY button before "PRGM" disappears from the display. 4 5 • You can select a service number from 1 to 6. Press the TUNER MEMORY button. Press the TUNER MEMORY button. 6 Repeat steps 2 to 5 to store other stations. Press to select the service number to which the service will be stored. • Press 1~6 on the remote control to select the stored station. • If no station is stored when you press 1~6, "NO MEMORY" will appear on the display. Tuning in to a Stored DAB Station 41P~78P(DS470)-GB 9/16/04 9:34 AM Page 68 68 DAB Related Functions • Each time you press the button during reception, the mode changes on the display as follows: • Depending on the service information, the display may vary or does not work. DLS (Dynamic Label Segment): Teletext Display This function may not work depending on the service area and broadcasting circumstances. Ensemble Label Frequency Bit Rate Press INFO. Information Display Function You can check various information about the service being received. • With the DAB function selected, press STOP on the main unit for longer than 5 seconds. • "DAB RESET" blinks on the display,then "PUSH TUNE" flash on the display. and the DAB function will be reset to the default setting. • Once you have initialized DAB, you need to press the TUNE button to search the services again. To Initialize DAB • If no button is pressed for 7~8 seconds, you will be exited from the Information Display function. • Small letters and some special characters (., /, =, ?) cannot be displayed. Note RADIO OPERATION Program Type (Pop, Classic, Rock, etc) 41P~78P(DS470)-GB 9/16/04 9:34 AM Page 69 69 Convenient Functions •The remaining time before the DVD player will shut itself off is displayed. •Pressing the button again changes the sleep time from what you have set earlier. To confirm the sleep timer setting, press SLEEP button. • "SLEEP" will be displayed. Each time the button is pressed the preset time changes as follows: 10 . 20 . 30 . 60 . 90 . 120 . 150 . OFF. TITLE CHAP PRGM RDS RT ST TUNED kHz MHz Press SLEEP button. Sleep Timer Function You can set the time that the DVD player will shut itself off. To cancel the sleep timer, press SLEEP button until OFF appears on the display. 41P~78P(DS470)-GB 9/16/04 9:34 AM Page 70 41P~78P(DS470)-GB 9/16/04 9:34 AM Page 71 Adjusting Display Brightness You can adjust the brightness of the display on the main unit so it won't interfere with your movie viewing. Press DIMMER button. • Each time the button is press, the brightness changes as follows: SLIGHTLY DARK . DARK . BRIGHT. Mute Function This is useful when answering a doorbell or telephone call. Press MUTE button. • ‘MUTE’ flash in the display. • To switch the sound back on (at the same volume as before), press MUTE again or the VOLUME buttons. Using Headphones Use headphones (not supplied) for private listening pleasure. Connect the headphones to the PHONES jack for private listening. • To prevent hearing damage, do not increase the volume excessively when using headphones. 41P~78P(DS470)-GB 9/16/04 9:34 AM Page 72 Operating a TV with the Remote Control When operating a TV with the remote control 1 1 Press the MODE button to make the TV indicator on the remote control flash. 2 Press POWER button to turn on the TV. 3 Poi...