Stimmen - 1, Durchschnittliche Bewertung: 4 ( )

Hersteller: Samsung Dateigröße: 8.32 mb Dateiname: Unterrichtssprache:

AUX 1 . AUX 2. • You can also use the FUNCTION button on the main unit. The mode switches as follows: DVD/CD . DIGITAL IN . AUX1 . AUX2 . FM . AM. Connect Audio In on the DVD player to Audio Out on the external analog component. • Be sure to match connector colors. 1 2 SUBWOOFER REAR R FRONT R CENTER REAR L FRONT L IMPEDANCE FRONT / CENTER / REAR : 4. SUBWOOFER : 4. 16 Example: Analog signal components such as a VCR or TV. Connecting an External Analog Component Audio Cable If the external analog component has only one Audio Out, connect either left or right. 15 CONNECTIONS Press AUX on the remote control to select ‘DIGITAL IN’. • Each time the button is pressed, the selection changes as follows: DIGITAL IN . AUX 1 . AUX 2. • You can also use the FUNCTION button on the main unit. The mode switches as follows: DVD/CD . DIGITAL IN . AUX1 . AUX2 . FM . AM. Connecting External Components Connect the Digital Input (OPTICAL) to the Digital Output on the external digital component. 1 2 SUBWOOFER REAR R FRONT R CENTER REAR L FRONT L IMPEDANCE FRONT / CENTER / REAR : 4. SUBWOOFER : 4. DIGITAL OUT Example: Digital signal components such as a Set-Top Box or CD Recorder. Connecting an External Digital Component Optical Cable (not included) Connecting the FM and AM Antennas Connecting the FM and AM Antennas Snap the tabs on the loop into the slots of the base to assemble the AM loop antenna. SUBWOOFER REAR R FRONT R CENTER REAR L FRONT L IMPEDANCE FRONT / CENTER / REAR : 4.SUBWOOFER : 4. FM Antenna (supplied) AM Loop Antenna (supplied) If AM reception is poor, connect an outdoor AM antenna(not supplied). FM antenna connection 1. Connect the FM antenna supplied to the FM 75 . COAXIAL terminal as a temporary measure. 2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface. AM antenna connection 1. Connect the AM loop antenna supplied to the AM and terminals. 2. If reception is poor, connect an outdoor single vinyl-covered wire to the AM terminal. (Keep the AM loop antenna connected). • If reception is poor, connect an outdoor antenna. Before attaching a 75 . coaxial cable (with a standard type connector), disconnect the supplied FM antenna. The cooling fan dissipates the heat generated inside the unit so that Cooling Fan normally. The cooling fan is activated automatically to supply cool air to the Please observe the following cautions for your safety. • Make sure the unit is well-ventilated. If the unit has poor ventilation, and may damage it. • Do not obstruct the cooling fan or ventilation holes. (If the cooling newspaper or cloth, heat may build up inside the unit and CONNECTIONS 17 18 Before Using Your DVD Player Your DVD player is capable of playing DVD, VCD, CD, MP3 and JPEG discs.Depending on the disc you are using, these instructions may vary slightly. Read the instructions carefully before using. Before Using Your DVD Player Your DVD player is capable of playing DVD, VCD, CD, MP3 and JPEG discs.Depending on the disc you are using, these instructions may vary slightly. Read the instructions carefully before using. 1 Plug the power cord into the AC power supply. 4 Press TV/VIDEO button to select VIDEO mode. Selecting the Video Format While the player is turned off, hold the NTSC/PAL down for longer than 5 seconds. • By default, the video format is set to "PAL". • Each time the button is pressed for longer switches between "NTSC" and "PAL". • Each country has a different video format standard. • For normal playback, the video video format of your TV. 2 2 Press the MODE button so Press the POWER button to that the TV indicator on the 3 turn on the TV. remote control flashes. DVD RECEIVER TV 5 5 Press the MODE button so that Press DVD button to select the DVD RECEIVER indicator 6 DVD/CD mode. on the remote control flashes. TV DVD RECEIVER To Operate the TV and DVD Player with Press MODE button. • Each time the button is pressed, the TV indicator (red) and the DVD Receiver indicator • You can operate the TV while the TV indicator is flashing and the DVD player • Buttons Enabled for TV Operation: POWER, CHANNEL, TV/VIDEO and Numeric (0-9) buttons. • By default, the remote control TVs. See page 69 for more information 20 CONNECTIONS Disc Playback CONNECTIONS 1 Press OPEN/CLOSE button to open the disc tray. 2 Load a discs. 3 Press OPEN/CLOSE button to close the disc tray. Note • Place a disc gently into the tray with the disc’s label facing up. DVD VCD CD • Playback starts automatically. • Depending on the content of the disc, the initial screen may appear different. • Depending on the recording mode, some MP3-CDs cannot be played. • Table of contents of a MP3-CD varies depending on the MP3 track format recorded on the disc. To stop playback, press STOP during playback. • If pressed once, “ PRESS PLAY” is displayed and the stop position will be stored in memory. If PLAY/PAUSE ( ) button or ENTER button is pressed, playback resumes from t...

Herunterladen

Geben Sie zwei Ziffern: