Stimmen - 1, Durchschnittliche Bewertung: 4
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Press the FUNCTION button to select FM. 2. Tune in to the desired station. • Automatic Tuning 1 : When the # $ buttons is pressed, a preset broadcast station is selected. • Automatic Tuning 2 : Press and hold the TUNING/CH (,,. ) buttons to automatically search for active broadcasting stations. • Manual Tuning : Press the TUNING/CH (,,. ) buttons to increase or decrease the frequency incrementally. Using buttons on the product 1. Press the FUNCTION ( ) button to select FM. 2. Select a broadcast station. • Automatic Tuning 1 : Press the STOP ( . ) button to select PRESET and then press the # $ buttons to select the preset station. • Automatic Tuning 2 : Press the STOP ( . ) button to select MANUAL and then press and hold the # $ buttons to automatically search the band. • Manual Tuning : Press the STOP ( . ) button to select MANUAL and then press the # $ buttons to tune in to a lower or higher frequency. Setting Mono/Stereo Press the MO/ST button. CMO/ST • Each time the button is pressed, the sound switches between STEREO and MONO. • In a poor reception area, select MONO for a clear, interference-free broadcast. 1. Press the FUNCTION button to select FM. 2. Press the TUNING/CH (,,. ) buttons to select <89.10>. TUNER MEMORY 3. Press the TUNER MEMORY button. • Number flashes on the display. 4. Press the # $ buttons to select preset number. B • You can select between 1 and 15 presets. 5. Press the TUNER MEMORY button again. • Press the TUNER MEMORY button before number disappears from the display. • Number disappears from the display and the station is stored in memory. 6. To preset another station, repeat steps 2 to 5. • To tune in to a preset station, press the # $ buttons on the remote control to select a channel. 34 English Advanced Functions USB Function Playing Media Files using the USB Host Feature You can enjoy media files such as pictures, movies and music saved on an MP3 player, USB memory stick or digital camera in high quality video with 5.1 channel sound by connecting the storage device to the USB port of the product. 1. Connect the USB device to the USB port on the front panel of the product. 2. Press the FUNCTION button to select USB. • USB appears on the display screen and then disappears. 3. Press the <> buttons to select Videos, Music or Photo. - Select a file to play. Safe USB Removal To prevent damage to the memory stored in the USB device, perform safe removal before disconnecting the USB cable. • Press the YELLOW(C) button. -REMOVE will appear on the display. • Remove the USB cable. .NOTE . To listen to your music files with 5.1 channel sound, you must set the Dolby Pro Logic II mode to Matrix. (See page 33) . Remove the USB cable from the USB port slowly. Otherwise, it may cause damage to the USB port. CD Ripping B Converts audio sound of the CDDA (Compact Disc Digital Audio) into a MP3 file format before sending to a USB storage device. 1. Connect the USB device to your product. 2. Insert the CDDA disc into the CD tray. 3. Press the CD RIPPING button. CD RIPPING • To start ripping the current track, press the CD RIPPING button on the remote control while the system is playing a track or stopped temporarily. D • To rip the entire CD, press and hold the CD RIPPING button on the remote control. -"FULL CD RIPPING" appears on the display and ripping starts. 4. Press the STOP (.) button to stop ripping. • When the CD ripping is done, a directory named "RIPPING" will be created in the USB device and the ripped file will be saved in a format of "SAM-XXXX”.MP3". .NOTE . Do not disconnect the USB connection or the power cable during the CD ripping. Otherwise, it may cause damage to the data. To stop CD ripping, press the STOP button and disconnect the USB device after the system stops playing the CD completely. . If you disconnect the USB connection during the CD ripping, the system will turn off and you will not be able to delete the ripped file. . If you connect the USB device to the system while it is playing a CD, the system stops temporarily and will play again. . DTS-CDs cannot be ripped. . If the ripping duration is less than 5 seconds, a ripping file may not be created. . CD ripping works only if the USB device is formatted in the FAT file system. (The NTFS file system is not supported.) For a list of compliant devices, refer to the specification of the USB host. . The ripping is performed at a normal speed of x3. The ripping time may be longer with some USB devices. . While the system is ripping a CD, the audio sound will not be output. . Do not put touch or move the system while it is ripping a CD. . When HDMI AUDIO is set to On, the CD Ripping function is not supported. 05 Advanced English 35 Other Information Troubleshooting Refer to the chart below when this product does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off the product, disconnect the power cord, and contact the nearest authorized dealer or S...
Dieses Handbuch ist für folgende Modelle:Heimkino-Systeme - HT-C445N (1.91 mb)
Heimkino-Systeme - HT-C453N (1.91 mb)