Stimmen - 4, Durchschnittliche Bewertung: 4.8
(
)
)
|
Fotos und technische Daten Sony DAV-TZ135 |
Anleitung Zusammenfassung
To select a surround setting . “REP FLD”: Repeats the current folder. Press SURROUND repeatedly during Note playback to select a surround audio output . The selectable modes and their order differ mode. The selected mode appears in the depending on the disc or file. front panel display. . “MULTI” (A.F.D. MULTI): When the source is 2 channel, sound is output from all speakers. . “STANDARD” (A.F.D. STANDARD): The system discriminates the sound format of the source and presents sound as it was recorded/encoded. . “DOLBY PL”(PRO LOGIC): Performs Dolby Pro Logic decoding. . “2CH ST” (2CH STEREO): All formats are downmixed to 2 channels. Note . Depending on the playback stream, the surround settings may not be effective. 19 [RS]: Adjusts the sound level of right .[Screen Saver] surround speaker. It is possible to adjust the [On]: The screen saver image appears if you parameter from -6.0 dB to +6.0 dB. do not operate the system for about 15 [LS]: Adjusts the sound level of left surround minutes. speaker. It is possible to adjust the parameter [Off]: Off. from -6.0 dB to +6.0 dB. .[Last Memory] [SW]: Adjusts the sound level of subwoofer. It This system recalls the point where you is possible to adjust the parameter from -6.0 stopped the disc the last time it was played dB to +6.0 dB. and resumes playback from that point the .[Distance] next time you insert the same disc. If you move one of the speakers, be sure to [On]: The system stores the resume points in set the parameters of the distance from the memory. listening position to speakers. [Off]: The system does not store the resume [L/R]: Adjusts the distance of the left/right points in memory. Playback restarts at the speakers. It is possible to adjust the parameter resume point only for the current disc in the from 1.0 m to 7.0 m (3 to 23 ft). unit. [C]: Adjusts the distance of the center Note speaker. It is possible to adjust the parameter . When the resume playback memory is full, from (A) 1.6 m shorter than the setting of the the resume playback point for the earliest L/R channel to (B) the same setting of the L/ disc is deleted. R channel ({L/R-5 ft} to L/R). .[Auto Standby] [Ls/Rs]: Adjusts the distance of the left/right [On]: Enters standby mode automatically surround speaker. It is possible to adjust the when in stop, pause, no disc, or eject mode parameter from (A) 5.0 m shorter than the for more than 30 minutes. setting of the L/R channel to (B) the same [Off]: The unit does not enter standby mode setting of the L/R channel ({L/R-16 ft} to L/ automatically. R). .[Center Speaker] Speaker Setup Page [On]: Activates the center speaker. .[Level] [Off]: Deactivates the center speaker. You can adjust the sound level of all the .[Sur. Speaker] speakers and the subwoofer. [On]: Activates the surround speakers. [L]: Adjusts the sound level of left speaker. It [Off]: Deactivates the surround speakers. is possible to adjust the parameter from -6.0 .[Test Tone] dB to +0.0 dB. The speakers will emit a test tone to set the [C]: Adjusts the sound level of center speaker. Level. It is possible to adjust the parameter from -6.0 dB to +6.0 dB. [On]: The speakers emit the test tone. [Off]: The speakers do not emit the test tone. [R]: Adjusts the sound level of right speaker. It is possible to adjust the parameter from Tip -6.0 dB to +0.0 dB. . To adjust the volume of all speakers, turn MASTER VOLUME on the unit or press VOLUME +/- on the remote control. 23 A DATA CD/DATA DVD cannot be played. . If the color irregularity persists, turn off . The DATA CD is not recorded in ISO to 30 minutes. the TV set once, then turn it on after 15 9660 Level 1/Level 2, or Joliet. . Reposition the speakers farther away . The DATA DVD is not recorded in UDF from your TV set. (Universal Disk Format). A JPEG image file cannot be played. your TV. The [TV Type] setting does not match . It is larger than 2,048 (width) . 1,536 [TV Type] can be reset according to the (height) in normal mode, or more than following procedure: 2,000,000 pixels in progressive format which is mainly used on Internet Web 1. Press . to take out the disc. sites. 2. Press DISPLAY. 3. Press . A video file cannot be played. [TV Type] will be reset. . The video file resolution is larger than 720 (width) . 576 (height). Sound The name of a folder or file is not There is no sound. Severe hum or noise is displayed correctly. heard. . The system can only display numbers and . The speaker cords are not connected letters of the alphabet. Other characters securely. are displayed as [_]. . Clean the disc. A disc does not start playing from the The sound loses stereo effect when you beginning. play a VIDEO CD or CD. . Resume Play has been selected. . Set the audio setting to [Stereo] by During stop, press . and then start pressing AUDIO. playback. . Program play has been selected. During Operation stop, press . and then start playback. . Shuffle play has been selected. During Radio stations cannot be tuned in. stop, press . and then...