Stimmen - 3, Durchschnittliche Bewertung: 3.3
(
)
)
|
Anleitung Zusammenfassung
• When connecting optical digital cords, insert the cord plugs straight in until they click into place. • Do not bend or tie optical digital cords. 5GB . 1a: Connecting components with digital audio output jacks Hooking up a DVD player or satellite tuner For details on the required cords (A–E), see page 5. 1 Connect the audio jacks. AMUOPT IN TV/SAT DVDVIDEO AUDIO INDIGITAL ANTENNA R L VIDEO IN SUB WOOFER OUT MONITOR OUT DVD DIGITAL OPTICAL OUTPUT DAAE*D* R AUDIO OUT OUTPUT L DIGITAL COAXIAL OUTPUT OPTICAL OUTPUT AUDIO OUT OUTPUT L R OPT IN COAX IN Satellite tuner DVD player * Connect to either the COAX IN or OPT IN jack. We recommend making connections to the COAX IN jack. Tip All the digital audio jacks are compatible with 32 kHz, 44.1 kHz, 48 kHz and 96 kHz sampling frequencies. 6GB 2 Connect the video jacks. AMUOPT IN TV/SAT DVDVIDEO AUDIO INDIGITAL ANTENNA R L VIDEO IN SUB WOOFER OUT MONITOR OUT OPT IN COAX IN DVD CVIDEO OUTPUT CVIDEO INPUT DVD player TV monitor Getting Started 7GB 1b: Connecting components with only analog audio jacks Hooking up video components If you connect your TV to the MONITOR OUT jack, you can watch the video from the selected input (page 20). For details on the required cords (A–E), see page 5. AMUOPT IN TV/SAT DVDVIDEO AUDIO INDIGITAL ANTENNA R L VIDEO IN SUB WOOFER OUT MONITOR OUT OPT IN COAX IN DVD CVIDEO INPUT BVIDEO OUT AUDIO OUT OUTPUT R L TV monitor VCR 8GB 2: Connecting the antennas Connect the supplied AM loop antenna and FM wire antenna. FM wire antenna (supplied) AM loop antenna (supplied) RL AMUOPT IN TV/SAT DVDVIDEO AUDIO INDIGITAL ANTENNA VIDEO SUB IN WOOFER OUT MONITOR OUT OPT IN COAX IN DVD Notes • To prevent noise pickup, keep the AM loop antenna away from the receiver and other components. • Be sure to fully extend the FM wire antenna. • After connecting the FM wire antenna, keep it as horizontal as possible. Getting Started 9GB 3: Connecting speakers Connect your speakers to the receiver. This receiver allows you to use a 5.1 channel speaker system. To fully enjoy theater-like multi channel surround sound requires five speakers (two front speakers, a center speaker, and two surround speakers) and a sub woofer (5.1 channel). Connect the surround speakers to the surround amplifier that receives the sound by wireless. Do not connect any speakers other than those supplied with this system. Example of 5.1 channel speaker system configuration Front speaker (Right) Surround speaker (Right) Center speaker Front speaker (Left) Sub woofer Surround speaker (Left) About the wireless system This wireless system adopts the Digital Infrared Audio Transmission system (page 41). The following diagram indicates the infrared transmission area (the range that the infrared rays can reach). Top view Side view Infrared signal Infrared signal 10 10 10 10 IR transmitter IR transmitter Approx. 10m Approx. 10m IR receiver IR receiver Notes • Do not install the IR receiver in a place exposed to direct sunlight or strong light such as an incandescent lamp. • Do not use the IR transmitter or IR receiver that is not supplied with the system. 10GB Required cords A Speaker cords (supplied) The connector and the colour tube of the speaker cords are the same colour as the speaker terminal to be connected. Colour tube + – B Monaural audio cord (supplied) Black Required equipments for the wireless system Surround amplifier Receives the sound from the IR receiver and sends to the surround speakers. Connect the surround speakers and the IR receiver to the surround amplifier. IR receiver Receives the sound by the infrared ray. Connect it to the surround amplifier. Tip To attach the IR receiver stand, push the cord upward and insert the stand to IR receiver. Make sure both delta marks on IR receiver and stand are aligned. IR receiver Delta marks IR receiver stand Getting Started POWER ON/STANDBY ON LINE IR transmitter Transmits the sound by the infrared ray. Connect it to the receiver. continued 11GB SUB WOOFER OUT MONITOR OUT FRONT R – + – +– + FRONT L INPUT BEeAAEeEeAAEeAEeSPEAKERS DIR-R1 IMPEDANCE USE 6.SURROUND L – + CENTER – + SURROUND R Front speaker (Right) Front speaker (Left) Subwoofer Center speaker Surround speaker (Left) Surround speaker (Right) Surround Amplifier IR Receiver DIR-R1 IR Transmiter DIR-T1 SUB WOOFER OUT MONITOR OUT FRONT R – + – +– + FRONT L INPUT BEeAAEeEeAAEeAEeSPEAKERS DIR-R1 IMPEDANCE USE 6.SURROUND L – + CENTER – + SURROUND R Front speaker (Right) Front speaker (Left) Subwoofer Center speaker Surround speaker (Left) Surround speaker (Right) Surround Amplifier IR Receiver DIR-R1 IR Transmiter DIR-T1 Notes • Before you connect the speakers, attach the colour labels onto the speakers so that you can identify the speakers to be connected. • Be sure to attach the supplied foot pads to the sub woofer. Tip Since the sub woofer does not emit highly directional signals, you can place it wherever you want. 12GB To change the speaker cord If you want to change the speaker cord,...