Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Sony Dateigröße: 881.08 kb Dateiname: 4168166421.pdf Unterrichtssprache:

For details on the operation, refer to the operating instructions of the TV. Notes • This function is available only when the Control for HDMI function is set to on. • The sound field may not switch depending on the TV. Enjoying movies with the optimum sound field (Theatre Mode) Press the THEATRE button on the remote of the receiver, TV, or the Blu-ray Disc player, while pointing the remote toward the TV. The sound field switches to “MOVIE-D.C.S.-”. To return to the previous sound field, press the THEATRE button again. Note The sound field may not switch depending on the TV. Tip The sound field may be changed back to the previous one when you change the TV’s input. 46GB S-AIR Operations About S-AIR products This receiver is compatible with the S-AIR function (page 64), which allows wireless sound transmission between S-AIR products. When you purchase the S-AIR product, you need to establish the sound transmission. There are two types of S-AIR product. • S-AIR main unit (this receiver): This is for transmitting sound. You can use up to 3 S-AIR main units. (The number of usable S-AIR main unit depends on the use environment.) • S-AIR sub unit (not supplied): This is for receiving sound. - Surround amplifier: You can enjoy surround speaker sound wirelessly. - S-AIR receiver: You can enjoy system’s sound in another room. These S-AIR products can be purchased as an option (the S-AIR products lineup differs depending on the area). Notes or instruction for the S-AIR sub unit in this operating instructions is refer only when the S-AIR sub unit is used. Room B J> s S-AIR sub unit (S-AIR receiver) <=> '—' About environments where S-AIR products (S-AIR main unit and sub unit) are used S-AIR products use a radio frequency of 2.4 GHz. Certain electronic equipment or other factors may cause lost connection or instability in S-AIR reception. • Electronic equipment influence The following may cause interference or cross talk. -Cellular phones, cordless phones -Wireless LAN, personal computers -Game machines using radio signals -Microwave ovens □ / \ □ o a) continued 47GB S-AIR Operations • Other factors The following may cause poor reception. -Materials or structures, such as walls and floors -The location where an S-AIR product is placed When using S-AIR products, place them as far as possible from the above electronic equipment, or place where S-AIR reception is stable. Setting up an S-AIR product Before using an S-AIR product, be sure to perform the following settings to establish the sound transmission. Inserting the wireless transmitter/transceiver To make use of the S-AIR function, you need to insert the wireless transmitter (not supplied) into the S-AIR main unit and the wireless transceiver (not supplied) into the S-AIR sub unit. Notes • Before inserting the wireless transmitter/ transceiver, be sure to disconnect the AC power cord (mains lead). • Do not insert/detach the wireless transmitter/ transceiver (not supplied) while the receiver is turned on. • Do not touch the terminals of the wireless transmitter/transceiver. 48GB To insert the wireless transmitter into the S-AIR main unit 1 Remove the screws. 3 Use the screws that you removed from step 1 to fasten the wireless transmitter. Do not use other screws to fasten the wireless transmitter. To insert the wireless transceiver into the S-AIR sub unit Refer to the operating instructions of the S-AIR sub unit. Note Remove the screws pointed with T marks. Do not remove other screws. 2 Insert the wireless transmitter. Notes • Insert the wireless transmitter with the S-AIR logo facing up. • Insert the wireless transmitter so that the V marks are aligned. • Do not insert other than the wireless transmitter into the EZW-T100 slot. 49GB S-AIR Operations Establishing sound transmission between the S-AIR main unit and S-AIR sub unit (ID setting) When you match the ID of the S-AIR main unit and the S-AIR sub unit, you can establish sound transmission. To set the ID of the S-AIR main unit 1 Press AMP MENU. “LEVEL” appears on the display. 2 Press V/V repeatedly until “S-AIR SET” appears, then press © or b. 3 Press V/V repeatedly until “S-AIR ID” appears, then press © or b. 4 Press V/V repeatedly to select the desired ID (A, B or C) then press ©. 5 Set the S-AIR sub unit to the same ID. Sound transmission is established as follows: 6 Press AMP MENU. The AMP menu turns off. To set the ID of the S-AIR sub unit Be sure to match the ID on S-AIR sub unit you want to the S-AIR main unit. For details on setting the ID of the S-AIR sub unit, refer to the operating instructions supplied with the S-AIR sub unit. To use multiple S-AIR main units You can use multiple S-AIR products by setting a different ID for each unit. Sound transmission is established as follows: 50fiB D ' ' № « aid ■* -th ■ After pairing Pairing the S-AIR main unit with Sound transmission is established between the a speci...

Herunterladen

Geben Sie zwei Ziffern: