Stimmen - 4, Durchschnittliche Bewertung: 4.5
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Heimkino-Systeme - DAV-DZ860W (1.16 mb)
Heimkino-Systeme - DAV-DZ860W (1.63 mb)
Anleitung Zusammenfassung
Settings for the HDMI [HDMI SETUP] HDMI SETUP HDMI RESOLUTION: AUTO(1920x1080p) CONTROL FOR HDMI: OFF VOLUME LIMIT: LEVEL2 YCBCR/RGB(HDMI): YCBCR AUDIO(HDMI): OFF JPEG RESOLUTION: SD x [HDMI RESOLUTION] You can select the type of video signal that is output from the HDMI OUT jack. For details, see “To select the type of video signal output from the HDMI OUT jack” (page 31). [AUTO (1920 . 1080p)]: The system outputs the optimal video signal for the connected TV. [1920 . 1080i]: The system outputs 1920 . 1080i* video signals. [1280 . 720p]: The system outputs 1280 . 720p* video signals. [720 . 480p]**: The system outputs 720 . 480p* video signals. * i: interlace, p: progressive ** Depending on the country model, [720 . 576p] may appear. x [CONTROL FOR HDMI] You can set the [CONTROL FOR HDMI] function to on/off. This function is available when you connect the system and TV with an HDMI cable. For details, see “Using the Control 58GB for HDMI Function for “BRAVIA” Sync” (page 68). [OFF]: Off. [ON]: On. You can operate mutually between components that are connected with an HDMI cable. Note • When you set to [ON] without the HDMI connection of the TV, [Please verify the HDMI connection.] appears and you cannot set to [ON]. x [VOLUME LIMIT] If you change the output method of the TV to the system speaker on the TV menu or by pressing THEATRE, the System Audio Control (page 70) is activated and loud sound may be output depending on the volume level of the system. You can prevent this by limiting the maximum level of the volume. [LEVEL3]: Maximum volume level is set to 10. [LEVEL2]: Maximum volume level is set to 15. [LEVEL1]: Maximum volume level is set to 20. [OFF]: Off. Note • This function is available only when [CONTROL FOR HDMI] is set to [ON]. x [YCBCR/RGB (HDMI)] You can select the type of HDMI signal output from HDMI OUT jack. [YCBCR]: The system outputs YCBCR signals. [RGB]: The system outputs RGB signals. Note • If the playback picture becomes distorted, set [YCBCR] to [RGB]. • If the HDMI OUT jack is connected to a component with a DVI jack, [RGB] signals will be automatically output even when you select [YCBCR]. x [AUDIO (HDMI)] You can select the audio output status from the HDMI OUT jack. [OFF]: The system does not output the sound from the HDMI OUT jack. [ON]: The system outputs audio signals by converting Dolby Digital, DTS, or 96 kHz/24 bit PCM signals to 48 kHz/16 bit PCM. Note • When you connect the unit and TV with an HDMI cable and [ON] is selected, [AUDIO DRC], [A/V SYNC], DYNAMIC BASS, “DEC. MODE,” and sound mode are not applied to the sound that is output from the TV. • When you set the function to other than “DVD,” the system does not output the sound from the HDMI OUT jack even if you set [AUDIO (HDMI)] to [ON]. x [JPEG RESOLUTION] You can select the resolution of JPEG image files output from the HDMI OUT jack. [SD ]: The system outputs standard resolution with a black frame. [HD ]: The system outputs HD resolution with a black frame. [HD]: The system outputs the HD resolution without a black frame. [(1920 . 1080i) HD ]: The system outputs full size HD resolution with a black frame. [(1920 . 1080i) HD]: The system outputs full size HD resolution without a black frame. Note • [JPEG RESOLUTION] is effective only when you set [TV TYPE] in [VIDEO SETUP] to [16:9], and you set [HDMI RESOLUTION] in [HDMI SETUP] to other than [720 . 480p] or [720 . 576p]. • You can select [(1920 . 1080i) HD ] or [(1920 . 1080i) HD] only when you set [HDMI RESOLUTION] in [HDMI SETUP] to [1920 . 1080i]. • If you select [(1920 . 1080i) HD ] or [(1920 . 1080i) HD], the next image appears after the black screen. • HDMI signal will stop momentarily when: – The system is loading or unloading a DATA CD or DATA DVD disc. – You connect or remove a USB device. Disc 59GB Settings for the audio [AUDIO SETUP] AUDIO SETUP AUTO CALIBRATION: SPEAKER FORMATION: AUDIO DRC: OFF OFFTRACK SELECTION: S-AIR SETUP: x [S-AIR SETUP] You can set up the S-AIR setting. For details, see “Using an S-AIR Product” (page 81). [ID] You can set the ID of the system. [PAIRING] You can pair the system and S-AIR sub unit, such as surround amplifier or S-AIR receiver. x [SPEAKER FORMATION] You can select the position of the speakers for the better surround sound. For details, see “Getting Optimal Surround Sound for a Room” (page 87). x [AUTO CALIBRATION] You can calibrate the appropriate settings automatically. For details, see “Calibrating the Appropriate Settings Automatically” (page 88). x [AUDIO DRC] (DVD VIDEO only) You can compress the dynamic range of the sound track. [AUDIO DRC] is useful for watching movies at low volume late at night. [OFF]: No compression of dynamic range. [STANDARD]: The system reproduces the sound track with the kind of dynamic range that the recording engineer intended. [MAX]: The system compresses dynamic range fully. Note • [AUDIO DRC] works only for Dolby Digital. x [TRACK SELECTION] (DVD VIDEO only) You can give the sou...