Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Heimkino-Systeme - RHT-G500 (1.25 mb)
Heimkino-Systeme - RHT-G500 (725.19 kb)
Heimkino-Systeme - RHT-G500 (2.21 mb)
Anleitung Zusammenfassung
To check the input signal, press the INPUT SELECTOR on the stand and select the input again. When the input is switched, the input signal type appears in the front panel. If “2.0ch’’ or “1.0ch” appears, the sound source is stereo or monaural, and does not No sound or only a very low-level sound is heard from the speakers. • Press VOLUME + and check the volume level. • Press MUTING or VOLUME + to cancel the muting function. • Press SOUND FIELD +/– and check the selected sound field. • Depending on the source, the sound effect of the speakers may be less noticeable. The sound is delayed compared to the image of the TV. • Set “A/V SYNC” to “OFF” when “A/V SYNC” is set to “ON.” Connected components There is no sound or only a very low-level sound no matter which component is selected. • Check that this system and components are connected correctly and securely. • Check that both this system and the selected component are turned on. There is no sound from the selected component. • Check that the component is connected correctly to the audio input jacks for that component. • Check that the cords are fully inserted into the jacks on both the component and this system. • Check that the component is selected correctly. • If you resume playback of a disc when volume is maximum, there may be no sound. In this case, turn down the volume, turn off the system and turn on again. Sound is interrupted or there is noise. • Check the output audio formats supported by this system on page 36. continued 33GB Additional Information There is no picture on the TV screen. • Check that the TV is selected correctly. • Set the TV to the appropriate input mode. Control for HDMI The Control for HDMI function does not work. • Check the HDMI connection (page 10). • Make sure “CTRL: HDMI” is set to “ON” in AMP menu. • Make sure the connected component is compatible with the Control for HDMI function. • Check the Control for HDMI settings on the connected component. Refer to the operating instructions supplied with the connected component. • If you change the HDMI connection, or connect/disconnect the AC power cord (main lead), or if there is a power failure, repeat the procedures of “Preparing for the “BRAVIA” Sync” (page 21). • The system may not work correctly if you select a component that is not compatible with the Control for HDMI function on the TV side. • Make sure “DVD CTRL”, “SAT CTRL” or “DMPORT. CTRL” is set to “ON” in AMP menu. If the system input is selected for a component whose “DVD CTRL,” “SAT CTRL” or “DMPORT. CTRL” setting is “OFF,” the Control for HDMI functions, such as One-Touch Play, System Audio Control, Volume Limit function, will not work, even if the Control for HDMI function setting of another component is set to on. No sound is output from the system and the TV’s speaker. • Check the volume of the system and the TV. • Select the input of the system correctly. The sound is output from both the system and the TV. • If the Control for HDMI function is set to off, or the selected component is not compatible with the Control for HDMI function, turn off the sound of the system or the TV. The System Power Off function does not work. • Change the setting of the TV to turn connected components off automatically when you turn off the TV. For details, refer to the operating instructions of the TV. An image does not appear on the TV. • Check whether HDMI IN and HDMI OUT are connected correctly. A message stating that the output method has changed from the system speaker to the TV speaker appears on the TV screen. • The Control for HDMI function for the selected component is set to off. For details, refer to “Setting the Control for HDMI function to off for a component without HDMI jacks” (page 23). Other The remote does not function. • Point the remote at the remote sensor on the system. • Remove any obstacles in the path between the remote and the satellite speaker. • Replace both batteries in the remote with new ones, if they are weak. • Make sure you select the correct input on the remote. The volume turns down when the output method changes from the TV speaker to the system speaker. • The Volume Limit function is working. For details, refer to “Using the Volume Limit function” (page 25). 34GB If the system still does not operate properly after performing Specifications the above measures, reset the system as follows: Use buttons on the system for the operation. 1 Press ?/1 to turn on the power. 2 Press INPUT SELECTOR, VOLUME – and ?/1 at the same time. “COLD RESET” appears and the system is reset. AMP menu, sound field etc., return to the default settings. Additional Information Dimensions: mm (approx.) A 1,010 B 400 C 550 Mass: kg 43 continued 35GB Formats supported by this stand Digital input formats supported by this system are as follows. Format Supported/Not supported Dolby Digital a DTS a Linear PCM (2ch)* a Linear PCM a (5.1ch, 7.1ch)* (Only on HDMI) Dolby Digital Plus . Dolby True HD . DTS-HD . * Linear PCM accep...