Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
Already connected (.page 6) Connect instead of the television to play audio from the video cassette recorder Audio cable (not included) Video cable (not included) : Signal flow To play audio from the television Reduce the volume on the television to its minimum and control the volume on this unit. .Connection example Operating the television and the video cassette recorder You can use the remote control to operate a Panasonic television or a video cassette recorder. Connect your equipment referring to “Connection Operating otherequipment example” (. above). [Note] The remote control may not work properly with some models. AV SYSTEM TV/VIDEO, Numbered buttons TV VOL SHIFT CD MODE PLAY MODE TEST CH SELECT SETUP MUTING ZOOM CM SKIP SUBTITLE AUDIO PLAY SPEED QUICK REPLAY SLEEP QUICK OSD ADVANCED DISC REVIEW FL DISPLAY REPEAT SHIFT ANGLE/PAGEGROUP Television Preparation Aim the remote control at the unit and press [TV] to light up the button, and then aim it at the television for the following operations: Turning the television on/off Press [I AV SYSTEM]. Switching the television’s video input mode Press [SHIFT]i[TV/VIDEO]. Changing channels Press [W CH X]. .[S10/ENTER] is used to confirm channel selection on some televisions manufactured by other companies. Adjusting the volume Press [TV VOLs] or [TV VOLr]. Video cassette recorder Preparation .Change the video input mode on the television (“VIDEO 2” in the example). .Aim the remote control at the unit and press [VCR] to light up the button, and then aim it at the video cassette recorder for the following operations: Turning the video cassette recorder on/off Press [I AV SYSTEM]. Play, pause and stop Press [1] (play), [;] or [.]. Fast forward and rewind Press [6] or [5]. Connecting a laser disc, tape or record player Connect instead of a video cassette recorder (. above) and select “AUX” as the source. We recommend using a record player with a built-in phono equalizer. If your player doesn’t have a built-in equalizer, connect it first to a separate equalizer and then to the unit. Changing the remote control code This remote control can also operate some other brands of televisions and video cassette recorders. Change the code to operate such equipment (. back cover). Aim the remote control at the equipment. While pressing [TV] or [VCR] Press a numbered button to enter the first digit, and then the second digit. The remote control outputs the on/off signal. If the code is correct, the equipment turns on or off. If it doesn’t, try entering another code. [Note] RQT7969 Reenter the codes after you change the batteries. 25 Other speaker setup options Other speaker setup options . Attaching to a wall You can attach all of the speakers to a wall. 1 Drive a screw (not included) into the wall. 30–35 mm (13/16q–13/8q) 2 Fit the speaker securely onto the screw(s) with the hole(s). .The wall or pillar on which the speakers are to be attached should be ‰7.5–9.4 mm ‰3.0–4.0 mm capable of supporting 10 kg (22 lbs) per screw. Consult a qualified (19/64q–3/8q) building contractor when attaching the speakers to a wall. Improper (1/8q–5/32q) attachment may result in damage to the wall and speakers. 4.0–7.0 mm (5/32q–9/32q) Wall or pillar .Use of optional speaker cables is recommended for wall-mounted front speakers. (You can also remove the speaker cables from the pipes supplied with this system). Front speaker Center speaker 180 mm (73/32z) Surround speaker In this position, the speaker will likely fall if moved to the left or right. Move the speaker so the screw is in this position. Other speaker setupoptions . Fitting speaker stands (not included) (Except Front speakers) Ensure the stands meet these conditions before purchasing them. Note the diameter and length of the screws and the distance between screws as shown in the diagram. .The stands must be able to support over 10 kg (22 lbs). .The stands must be stable even if the speakers are in a high position. Speaker stand (not included) Plate thickness plus 7 mm to 10 mm (plus 9/32q to 13/32q) Surround speaker e.g. 5mm (3/16q), pitch 0.8 mm (1/32q) Attach the stands to these metal screw holes. 60 mm (23/8q) RQT7969 26 Specifications Specifications AMPLIFIER SECTION RMS Output Power: Dolby Digital Mode Front Ch 55 W per channel (6 .), 1 kHz, 10 % THD Surround Ch 55 W per channel (6 .), 1 kHz, 10 % THD Center Ch 160 W per channel (6 .), 1 kHz, 10 % THD Subwoofer Ch 220 W per channel (4 .), 100 Hz, 10 % THD Total RMS Dolby Digital mode power 600 W FTC Output Power: Dolby Digital Mode Front Ch 35 W per channel (6 .), 120 Hz–20 kHz, 1 % THD Surround Ch 35 W per channel (6 .), 120 Hz–20 kHz, 1 % THD Center Ch 110 W per channel (6 .), 120 Hz–20 kHz, 1 % THD Subwoofer Ch 140 W per channel (4 .), 45 Hz–120 Hz, 1 % THD Total FTC Dolby Digital mode power 390 W FM/AM TUNER, TERMINALS SECTION Preset station FM 15 stations AM/MW 15 stations Frequency Modulation (FM) Frequency range 87.9–107.9 MHz (200-kHz step) 87.5–108.0 MHz (100-kHz step) ...