Stimmen - 2, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
HDMI-C5SW-R can be used with SW-HDMI-C5-8X8 or SW-HDMI-C5-4X4 Matrix Switch Series over CAT5 / CAT6. Through low cost Cat-5/5e/6 LAN cables, not only high quality video and audio can be transmitted to the display sites, but also users can switch among four HDMI sources using the push-in button or remote control. With single power design at the source site, each remote module is easily installed without power supply. Furthermore, the built-in IR extension function makes users at display site access the DVD player, PS3 or any HDMI supported devices directly. - Silicon Image chipset embedded for best quality, compatibility and reliability - HDMI 1.3c compliant - HDCP compliant - Allows any source to be displayed on multiple displays at the same time - Allows any HDMI display to view any HDMI source at any time - Supports 7.1 channel digital audio - Supports default HDMI EDID and learns the EDID of displays - The matrix master can switch every output channels to any HDMI inputs by push-in button, IR remote control, or RS-232 control - Allows controlling local HDMI sources such as DVD and TiVo by attached IR extender from remote receiver to matrix master - Allows to control matrix master through IR remote control at remote receiver’s site - Extends video signal up to 35m (115 feet) over CAT5e at 1080p and likely longer with better HDMI source device, better grade HDMI display, and better quality solid CAT6 cable - Easy installation with rack-mounting and wall-mounting designs for master and receiver respectively - Fast response time – 2~5 seconds for channel 1.5 Package Contents Before you start the installation of the converter, please check the package contents. - HDMI-C5SW-R x 1 - User’s Manual x 1 1.6 Before Installation . Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction. . Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity. . Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire. . Do not twist or pull by force ends of the optical cable. It can cause malfunction. MA-5188C_RX_04 MA-5188C_RX_03 1.7 Panel Description 1.7.1 HDMI-C5SW-R 1. 5V DC Power jack 2. HDMI Signal 3. IR Signal 4. INPUT # 5. Input Select 6. EQ Level 7. HDMI OUT 8. IR Transmitter 1.8 Installation (HDMI-C5SW-R) To setup Avenview HDMI-C5SW-R with SW-HDMI-C5-8X8 or SW-HDMI-C5-4X4 follow these steps for connecting to a device: 1. Connect all sources to HDMI Inputs on the 8X8 HDMI over CAT5 Matrix Switch (SW-HDMI-C5-8X8) 2. Connect each DDC output on the SW-HDMI-C5-8X8 to respective DDC input on the remote receiver HDMI-C5SW-R 3. Connect each TMDS output on the SW-HDMI-C5-8X8 to respective TMDS input on the remote receiver HDMI-C5SW-R 4. Connect IR emitter cable to the SW-HDMI-C5-8X8 and direct the IR emitter to the build-in IR receiver of the sources 5. Connect the +5V 6A DC power supply to the SW-HDMI-C5-8X8 6. Power on all HDMI sources 7. Power on the SW-HDMI-C5-8X8 Please refer to SW-HDMI-C5-8X8 or SW-HDMI-C5-4X4 Matrix Switch user guides for details on how to setup IR, Software. Section 2: Specifications Item Description Units HDMI-C5SW-R Unit Description HDMI 1.3 Receiver over CAT5 HDMI Compliance HDMI 1.3c HDCP Compliance Yes Video Bandwidth Single Link 225 MHz (6.75Gbps) Supported Resolutions 480i / 480p / 720p / 1080i / 1080p60 Resolution and Distance Full HD: (1080p) ~ 35meter (115feet) (CAT5e) / 40meter (130feet) (CAT6) HD: (720p/1080i) ~ 50meter (165feet) (CAT5e) / 55meter (180feet) (CAT6) Audio Support Surround Sound (up to 7.1 Ch.) or Stereo Digital Audio Equalization -8 Level Digital Control Input TMDS Signal 1.2 Volts (peak-to-peak) Input DDC Signal 5 Volts (peak-to-peak, TTL) ESD Protection - Human body model — ±15kV (air-gap discharge) & ±8kV (contact discharge) - Core chipset — ±8kV Input 1 x RJ45 TMDS 1 x RJ45 DDC 1 x IR Socket for IR Receiver Output 1 x HDMI HDMI Input Selection Push Button / IR Remote HDMI Source Control Through IR Control Path from IR Receiver HDMI Connector Type A (19 pin female) RJ45 Connector WE/SS 8P8C with 2 LED indicators RS232 Connector DE-9 (9-pin D-sub Female) Dimensions (L x W x H) 3.3” x 3.5” x 1” Power Supply Mostly not required Power Consumption 1 Watt (max) / provided by SW-HDMI-C5-8X8 Environmental Operating Temperature 32. ~ 104.F (0. to 40.C) Storage Temperature -4. ~ 140.F (-20. ~ 60.C) Relative Humidity 20~90% RH (no condensation) Notice 1. If the DVI or HDMI device requires the EDID information, please use EDID Reader/Writer to retrieve and provide DVI/HDMI EDID information. 2. All HDMI over CAT5 transmission distances are measured using Belden 1583A CAT5e 125MHz LAN cable and ASTRODESIGN Video Signal Generator VG-859C.3 3. The transmission length is largely affected by the type of LAN cables, the type of HDMI sources, and the type of HDMI display. The testing result shows solid LAN cables (usua...