Stimmen - 3, Durchschnittliche Bewertung: 3.3
(
)
)
|
Anleitung Zusammenfassung
Ne debranchez jamais l’appareil en tirant le cordon d’alimentation. Saisissez fermement la fiche du cordon et tirez droit pour la retirer de la prise. Reparez ou remplacez immediatement tout cordon effiloche ou endommage. N’utilisez pas un cordon fendille ou presentant des signes d’usure. Lorsque vous deplacez l’appareil du mur, faites attention de ne pas la faire rouler sur le cordon d’alimentation afin de ne pas l’endommager. CONSERVEZ CES DIRECTIVES Controls and Features Wine Chiller Temperature control The temperature range of the wine chiller is from the low forties to the mid sixties. Do not install the wine chiller where the temperature will go below 55°F (13°C) or above 90°F (32°C). The RED WINE setting will provide a storage temperature of approximately 55.F (13.C), which is optimum for the storage for red wine. The WHITE WINE setting will provide a storage temperature of approximately 45.F (7.C), which is optimum for white wine. As with any refrigeration product, there is a slight temperature variance at different locations within the cabinet. Temperatures at the bottom of the cabinet will be cooler than temperatures at the top of the cabinet. Position your wine inventory accordingly (i.e. white wines in the cooler zones and red in the warmer zones). To set the control, turn it to the RED WINE setting. Once the bottles are loaded, allow at least 24 hours before making any adjustments to the initial setting. Interior light and switch The interior light makes it easy to view your wine labels and enhances the display of your collection. When the switch is in the OFF position, the light comes on only when the door is opened. When the switch is in the ON All of the full extension drawers pull out so bottles can be conveniently added or removed. Any of the full extension drawers can be removed to store larger bottles. To remove: 1. Pull the full extension drawer out to the Tab (push tab down on right drawer guide, pull tab up on left drawer guide) position, the light remains on continuously for your maximum viewing pleasure. For best viewing do not store a bottle on the top shelf directly under the light. Remember to turn off the light when it is no longer needed. Removing full extension drawers STOP position. 2. Push the tab on right drawer guide down while pulling the tab on left guide up, and pull the drawer out. To replace: 1. Push the drawer slide arm back into the unit. 2. Pull the small slide sub-assembly completely forward. 3. Insert the sides of the drawer back into the guides. 4. Push until the tabs lock into place. Sub-assembly Sub-assembly To replace, push drawer slide Pull small slide sub-assembly arm back into unit completely forward NOTE: Make sure the tabs on the full extension drawer guides are fully engaged before loading any bottles. Pull the drawers out all the way to the STOP position and push back in several times to make sure locking tabs are properly engaged. Operating Instructions Wine Chiller Insert wine The top five full extension drawers each The bottom two full extension drawers bottles hold eight bottles, two deep with the necks alternating front to back or nine bottles, hold six bottles each and are loaded with necks facing the rear. Tall bottles should alternating with necks pointing inward. not be loaded on the bottom drawer because they may prevent the door from closing. 8 bottle arrangement 9 bottle arrangementBottom drawer Loading tips and suggestions • The bottles on the top full extension drawer, directly under the light, will be exposed to a slightly higher temperature when the light is on. Position your wines accordingly and remember to turn off the light when it is no longer needed. • Keep wines that you plan to use for everyday drinking and entertaining on the front half of the full extension drawers where labels are completely visible. Place wines for aging or longer term storage in the rear. • Do not allow children to climb, stand or hang on the wine chiller full extension drawers. They could seriously injure themselves and possibly cause damage to the wine chiller. Wood drawer fronts The full extension drawer fronts on the wine chiller are unfinished cherry wood. During use, oil from hands may accumulate and stain the wood. • The drawer fronts may be stained and sealed to match adjacent cabinetry. The tinted glass will make the stained wood appear darker. A true color match can be seen only when the door is opened. • Apply the stain and sealer according to the manufacturer’s instructions. To avoid unpleasant odor, keep the door open to ventilate and allow the stain/sealer to dry completely before using the product. NOTE: Natural wood may vary slightly in grain and color. Care and Cleaning Wine Chiller Unplug the wine chiller before cleaning. Cleaning the inside Turn the wine chiller unit OFF or unplug the unit before cleaning. Use a slightly damp cloth or sponge when cleaning around switches, lights or controls. Use warm water and baking soda solution— about ...