Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
182713 Retain This Manual In A Safe Place For Future Reference American Dispensing Company products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble-free operation. ONLY properly licensed technicians should service this equipment. Observe all safety precautions displayed on the equipment or specified in the installation/operator's manual included with the water vending machine. UNDER NO CIRCUMSTANCES should the pressure switches) or other safety devices ever be disabled. We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models. Important For your convenience, log the following information: Date of Purchase __Model No. AD-830 Serial Number(s)_ Door Key Number(s) Coin Vault Number(s) Replacement parts can be obtained from your distributor or the ADC factory. When ordering replacement parts from the factory, you can FAX your order to ADC at (508) 678-9447 or telephone your orders directly to the ADC Parts Department at (508) 678-9010. Please specify the water vending machine model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly. IMPORTANT YOU MUST DISCONNECT and LOCKOUT THE ELECTRIC SUPPLY BEFORE ANY COVERS or GUARDS ARE REMOVED FROM THE MACHINE TO ALLOW ACCESS FOR CLEANING, ADJUSTING, INSTALLATION, or TESTING OF ANY EQUIPMENT per OSHA (Occupational Safety and Health Administration) STANDARDS. CAUTION LABEL ALL WIRES PRIOR TO DISCONNECTION WHEN SERVICING AD-830. WIRING ERRORS CAN CAUSE IMPROPER AND DANGEROUS OPERATION, v _ FOR YOUR SAFETY THE SYSTEM IS SHIPPED WITH A PRESERVATIVE SOLUTION MADE OF SODIUM BISULFITE AND (IN THE WINTER MONTHS) GLYCERINE. MAKE SURE THE SYSTEM IS THOROUGHLY PURGED BEFORE LETTING ANYONE DRINK THE DISPENSED WATER. REFER TO THE INSTALLATION SECTION ON PURGING PROCEDURE. CAUTION Never look directly into the unprotected parts of the U.V. chamber when there is power to the sterilizer. Serious bums to the eyes and the skin may result. Always unplug power to the sterilizer before working on it. V IMPORTANT Please observe all safety precautions displayed on the equipment and/or specified in the installation / operators manual included with the AD-830. IMPORTANT The wiring diagram for the water vending machine is located behind the coin control door. Water vending machine(s) must not be installed or stored in an area ^ where it will be exposed to water and/or weather._ Table of Contents Microprocessor Failure Codes................................................................................. 2 1. Flow Meter......................................................................................................... 2 2. R.O. Filter........................................................................................................... 2 3. Filter.................................................................................................................... 2 4. Overflow............................................................................................................ 2 5. Use Other Side.................................................................................................. 2 6. Chnger Unplug................................................................................................. 2 7. System Refill Please Wait................................................................................. 2 8. System Purge Do Not Drink...........................................................................3 Electrical Problems Associated with Microprocessor Failure Codes.................4 1. Flow Meter Error..............................................................................................4 2. R.O. Filter Error................................................................................................. 6 3. Filter Error......................................................................................................... 7 4. Overflow Error.................................................................................................. 8 A. U.V. Light..................................................................................................... 8 B. Base Float Switch......................................................................................... 9 C. Containment Tank Overflow Switch....................................................... 9 D. Vending Bay Tank Overflow Switch...................................................... 10 5. Chnger Unplug Error..................................................................................... 11 6. System Refill Please Wait......................................