Stimmen - 4, Durchschnittliche Bewertung: 3.3
(
)
)
|
Anleitung Zusammenfassung
Assembling your DCO7 Using your DCO7 4 6 Using the tools 8 Emptying the clear binTM 10 Cleaning the lifetime filter 12 Where to look for blockages 14 Warranty and customer care 16 Contents Dyson Helpline contact us on 1-866-693-9766 3 Assembling your DCO7 Assembling your DCO7 This machine was inspected and packaged carefully before being shipped from the factory. If you need assistance during assembly or operation, please call the Dyson Helpline on 1-866-693-9766. 1 Slide the hose into the guides at the back of the machine, pushing the tab securely into place. Box contents Stair tool Crevice tool Brush tool Wand Hose Floor tool Supplied with certain models only, or available as an accessory. Animal turbo tool Supplied with certain models only, or available as an accessory. Dyson Helpline contact us on 1-866-693-9766 4 1 2 1 2 2 Pressing the wand release button, slide the wand down inside the hose. 3 4 3 4 Assembling 3 Slide the wand into the top 4 Push the brush and stair tools 5 Store the cord safely by of the machine until it clicks securely into place. You may securely into the storage holes on either side of machine. winding counter-clockwise around the cord winders and need to press firmly and Fit the crevice tool into the tool securing with the cord clip. should hear a ‘click’ sound. clip on the back of the wand. 5 Using your DCO7 Using your DCO7 WARNING • To reduce the risk of electric shock and personal injury, this appliance has a polarized plug (one blade wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not force the plug into the outlet. Do not alter the plug in any way. CAUTION • Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts. • This machine is fitted with a belt protection system. If any item becomes caught in the brushbar (e.g. rug fringe), you will hear a loud ‘ratchet’ warning noise. To rectify, turn the machine off, disconnect from the electrical outlet and clear any obstruction (see page15), checking that the brush control is set to the correct position for the floor surface before re-starting the machine. Please note: This machine is intended for domestic use only. Fine dust such as plaster dust or flour should only be vacuumed in small amounts. 1 2 3 Switching on/off 1 Make sure you have read 3 To start vacuuming, push the and understood all safety front of the cleaner head down instructions before using the with your foot and tilt the machine for the first time. handle backwards. The wand cap should be closed when not using the tools. 2 Plug into electrical outlet and press the on/off switch. Dyson Helpline contact us on 1-866-693-9766 6 1 2 Using 1 2 Using Transporting your Dyson To move the machine from room to room, ensure it is upright, with the cord stored on the cord winders and the wand securely in place. Tilt back on the rear wheels and push forward. Carrying your DCO7 Your DCO7 should be lifted by using the carry handle. CAUTION • Do not shake the machine when carrying. • For your safety do not press the cyclone release catch when carrying your machine. Brush control system Ensure the machine is in an upright position before adjusting the setting. 1 Bare floors Brushbar does not turn for delicate rugs and hard/bare floors. 2 Carpets Brushbar turns for normal carpet cleaning. Please note: The brushbar will not turn until you begin to vacuum. 7 Using the tools Using the tools Choosing the right tool The tools allow you to clean surfaces above the floor and to reach hard to clean areas. Ensure the machine is in an upright position before using tools. A Brush tool – with soft bristles to dislodge dust and cobwebs. The brush head twists to make cleaning easier. B Stair tool – with velour strips to pick up hairs and an agitating edge to lift the carpet. The tool channels airflow downward for better pick-up without sticking to upholstery. The head twists to make cleaning easier. C Crevice tool – reaches deep into nooks and crannies. Ideal for cleaning along baseboards and in tight corners. The tool channels airflow downward for better pick-up without sticking. D Animal turbo tool – the air powered brushbar ensures effective removal of pet hair and fibers in confined spaces such as stairs, upholstery and in the car. Supplied with certain models only, or available as an accessory for other models – contact the Dyson Helpline or to order. E Floor tool – to reach under furniture. Adjustable for hard floors or carpets. Maintains perfect contact with the floor to optimize pick-up. Supplied with certain models only, or available as an accessory for other models – contact the Dyson Helpline or to order. A B C D E How to clean your tools The brush tool, stair tool and crevice tool may be washed in warm water with a detergent. Rinse and...