‘PLIIx Music’, ‘PLIIx THX’ and ‘PLIIx Movie’ revert to PLII variants if there aren’t four surrounds. Ambisonics (B format) is only available if the decoder says Music6. This is because Ambisonics would normally only arrive from a multichannel analogue input or a (decoded) DVDA, it can’t be encoded with lossy compression like AC3 or DTS, so would not be a sensible Preset to use if the decoder said Movie6. Multichannel presets that need four surrounds (THX UltraII Cinema, PLIIxMus6, PLIIxMov6, THX

Panasonic Microcassette™ Recorder RN-102/122 Operating Instructions Before connecting, operating or adjusting this product, ptease read these instructions completely. RQT0888-L F1290t0 GN Location of Controls REC/SLE ВАТТ Indicator (RN-122) VOLUME/ VAS LEVEL MONIT Jack Cassette Compartment Cover The shape of RN*102's cover is different from this figure. Tape COUNTER and Reset Button (RN-122) Speaker Power Source MIC Jack (RN-122) SLE/TONE Selector (RN-122) MIC REC Button REW/

Insert the cassette. Close the cover. 2. Set the PAUSE Selector to "OFF”. (RN-102) Set the VAS/PAUSE Selector to "VAS” if VAS feature is desired or "OFF” if not. And set the SLE Selector to "ON” if desired. (RN-122) 3. Set the TAPE SPEED Selector as desired. .The ‘'2.4" position is suggested for better sound quality. (2.4 cm/sec., Standard play) The “1.2" position makes it possible to record for 120 min., using 60 min. microcassette tape. (1.2 cm/sec., Long play) 4. Press the REC Button.

Please keep this manual for future reference. Rechargeable batteries (2) . . . . . . . RFCT0002-H Remove the rechargeable batteries from their case before use. AC adaptor/charger (1). . . . . . . . . . RFEA302C-S .To order accessories contact 1-800-332-5368 or web site (.Use numbers indicated when asking for replacement parts. Supplied Accessories (RQ-L51 only) p Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way Secaucus, New Jersey

Also never use an alkaline battery with a manganese battery. ■ Head care Q To ensure good sound quality, be sure to clean the head after approximately every 10 hours of use with a cotton swab dampened with a little alcohol. ■ To record with VAS (Voice Activated System) function (Only RN-502) The sound is recorded automatically, so there is no tape waste. To use VAS function, select VAS in step 2 and adjust the VAS LEVEL. 1-3: If you wish to record only the louder sounds. 4-7: If you wis

Q Also, the tape speed will slow down, the sound will become distorted and the volume will decrease. ■ AC power operation m Connect only Panasonic AC adaptor (optional). To make recording |j_ Follow the steps 1-4 as figure S. Use a tape with tabs in place. The recording level is automatically adjusted. The built-in microphone is omnidirectional, so that recording is available in every direction. ■ To stop recording Press STOP/EJECT. ■ To temporarily stop recording Set the PAUSE selecto

please ieaa these instructions completely Ploase save in« manual. raiecj The serial number of mis product can be found inside o' the battery compartment. Please note them in the space provided below and keep as a permanent recoro of your purchase 10 aid identification in the event of theft MODEL NUMBER......... SERIAL NUMBER ....____ Matsushita Consumer Electronics Company, Division of Matsushita Elcctric Corporation ot America One Panasonic Way Sccaucjs. New Jersey 070Э4 Panasonic Sates

The unit and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the unit and cartV ■ combination to overturn. 7. Wall or Ceiling Mounting -- The unit should not be mounted to a wall or ceiling, unless specified in this operating instructions. (See page 30 for details.) Clean the cabinet, panel and controls with a soft cloth lightly moistened with mild detergent solution. Service- 1. Damage Requiring Service -- The unit should be servic

Do not .leave it in an automobile exposed to direct sunlight for a long time with the doors and windows closed as this may deform the cabinet. •Avoid cuts, scratches, or poor connections in the AC power cord, as they may result in possible fire or electric shock hazard. Aiso, excessive bending, pulling or splicing of the cord should be avoided. •Do not unplug the AC power cord by pulling on the cord. To do so may cause premature failure or shock hazard. •Do not operate the set on AC power in a