Stimmen - 1, Durchschnittliche Bewertung: 4
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Locate the point where you want to start recording (page 14) and then slide the control key to REC. “ADD REC” will be displayed and you can add an overwrite recording to the current message. Tips The deleted part of Message 2 Added overwrite recording in Message 2 Message 4 Message 4 Start recording at a point in the middle of a recorded message Message 2 Message 3 Message 3Message 2 • You can select the overwrite recording mode using the menu (page 41). • The overwrite recording will be added in the same recording mode as the original message, regardless of the current recording mode setting. Note Playback after the overwrite recording starts from the beginning of the message. Playback after a stop starts from the point where you stopped playback. Continued 15GB Recording Messages (continued) Using Convenient Functions while Recording Reviewing the recording Slide the control key to B.SPACE. You can search backwards while listening to fast playback sound. After you slide the control key to PLAY, playback starts from that point. You can add an overwrite recording from that point. Monitoring the recording When recording, you can connect an ear receiver supplied or not supplied to the i (headphones) jack and monitor the recording from the connected ear receiver. You can adjust the volume with VOL +/–, but the recording level is fixed. Note If you turn up the volume excessively or place the ear receiver near the microphone while monitoring recording, the microphone may pick up the sound from the ear receiver, causing acoustic feedback (howling sound). Starting recording automatically in response to the sound — Advanced VOR function Slide the VOR (voice operated recording) switch to ON during stop or recording mode. Set the control key to REC. Recording starts when the unit detects sound, and “VOR” appears in the display window. The recording pauses when no sound is detected, and “VOR PAUSE” appears. Notes • Recording will not be started unless the control key is set to REC. • VOR function is affected by the sound around you. Set the MIC SENS (microphone sensitivity) switch according to the recording conditions. If recording is not satisfactory after you have changed the microphone sensitivity, or for important recording, set the VOR switch to OFF. 16GB Selecting the microphone sensitivity Slide the MIC SENS (microphone sensitivity) switch during stop or recording mode according to the recording conditions: • CONF(H) (high): To record a small sound at a conference or in a quiet and/ or spacious place. • DICT(L) (low): To record for dictation. Using the memory remain indication During recording, the remaining memory indicator decreases one by one. When the remaining recording time reaches 5 minutes, the remaining memory indication flashes. When the remaining time reaches 1 minute, the remaining time indication will flash in the display window regardless of the display mode (page 26). Memory indicator flashes. Remain time indication flashes. When the memory is full, recording automatically stops and “NO MEMORY SPACE” will be displayed with an alarm sound. Please slide the control key to STOP. To continue recording, erase some of the messages (page 28) or replace the “Memory Stick”. Note When you set the BEEP (page 51) to OFF, an alarm sound (beep) does not sound. Basic Operations 17GB Recording with an External Microphone or Other Equipment You can record sound of an external microphone or other equipment (tape recorder, MiniDisc player, or etc.) with the IC recorder. Depending on the device you use, connect the IC recorder as follows. For available accessories, consult with your nearest Sony dealer. Recording with an External Stereo Microphone Connect an external stereo microphone to the MIC (microphone) jack. You can enjoy the stereo recording by using a stereo microphone. mini-plug (stereo) When you connect an external microphone, the built-in microphone is automatically cut off. When a plug in power type microphone is connected, power is automatically supplied to the microphone from the IC recorder. 1 Recommended types of microphones You can use the ECM-DS70P Sony electret condenser microphone (not supplied). Note Before you start the stereo recording with an external stereo microphone, set MODE to ST in the menu (page 50). 18GB Recording from Other Equipment To record sound of other equipment with the IC recorder, connect the MIC (microphone) jack of the IC recorder to the earphone jack of other equipment (tape recorder etc.) by using an audio connecting cable. Notes • When the audio recording level is large, sound may be recorded interrupted if you use an audio connecting cable without register. Use a registered audio connecting cable. • When the audio recording level is small, do not use a registered audio connecting cable. Recording with Other Equipment To record the sound of the IC recorder with other equipment, connect the i (headphones) jack of the IC recorder to the audio input connector (minijack, st...