Stimmen - 3, Durchschnittliche Bewertung: 3.3
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Recording sound from a telephone or a cell phone You can use the ECM-TL1 headphone- type electret condenser microphone (not supplied) to record sound from a telephone or a cell phone. For details on how to make the connection, see the operating instructions supplied with the ECM-TL1 microphone. 34GB Playback/Erasing Playing Back Messages 1, 251, 3 . (headphone) jackA-B/ V-UPDIVIDE/ 14DPC 1 Select a folder. . Press /MENU. . Press . or . to select the folder and then press ... 2 Press . or . to select the message number. 3 Press .. to start playback. 4 Adjust the volume with VOL +/–. 5 Press . to stop playback. After playing back one message, the IC recorder stops at the beginning of the next message. Playback/ Erasing 35GB Listening with better sound quality To listen from an ear receiver : Connect the stereo ear receiver supplied to the . (headphone) jack. The built-in speaker will be automatically disconnected. To listen from an external speaker: Connect an active or passive speaker (not supplied) to the . (headphone) jack. Quickly locating the point you wish to start playback (Easy Search) When “EASY SEARCH” is set to “ON” (page 52) in the menu, you can quickly locate the point at which you wish to start playback by pressing . or . repeatedly during playback or playback pause. You can go back approx. 3 seconds by pressing . once, or advance approx. 10 seconds by pressing . once. This function is useful for locating a desired point in a long recording. Searching forward/backward during playback (Cue/Review) To search forward (Cue): Press and hold . during playback and release it at the point you wish to resume playback. To search backward (Review): Press and hold . during playback and release it at the point you wish to resume playback. The IC recorder searches at slow speed with playback sound. This is useful to check one word forward or back. Then, if you press and hold the button, the IC recorder starts to search at higher speed. During cue/review, the counter will be displayed, regardless of the setting of “DISPLAY” (page 51). When messages are played back to the end of the last message When you play back or fast play back to the end of the last message, “MESSAGE END” lights up for 5 seconds and the operation indicator lights up in green. (You cannot hear the playback sound.) When “MESSAGE END” and the operation indicator go off, the IC recorder will stop at the beginning of the last message. If you press and hold . while “MESSAGE END” is lit, the messages are played back rapidly, and normal playback will start at the point you release the button. If the last message is long and you wish to start playback at a later part of the message, press and hold . to go to the end of the message and then press . while “MESSAGE END” is lit to go back to the desired point. For messages other than the last one, go to the beginning of the next message and play backward to the desired point. To Do this stop at the current position (Playback Pause function) Press . (stop) or ... To resume playback from that point, press .. again. go back to the beginning of the current message* Press . once.** go back to previous messages Press . repeatedly. (During stop mode, keep the button pressed to go back the messages continuously.) skip to the next message* Press . once.** skip to the succeeding messages Press . repeatedly. (During stop mode, keep the button pressed to skip the messages continuously.) * If you have set a bookmark on the message, the IC recorder stops at the bookmark. ** These operations are for when “EASY SEARCH” is set to “OFF” (page 52). Various playback modes You can select “1 FILE” playback (one message/file is played back once), “FOLDER” playback (all the messages/files in the selected folder are played back continuously), “ALL” playback (all the recorded messages/files are played back continuously) in the “PLAY MODE” menu (page 52). Playing back a message repeatedly During playback, press and hold .. until “1” appears. The selected message will be played back repeatedly. To resume normal playback, press .. again. Reinforcing the bass sound Set “EFFECT” to “BASS1” or “BASS2” in the menu (page 52). Adjusting the playback sound by amplifying inaudible sound – the Digital Voice Up function When you slide the V-UP switch to “ON,” the low-level part of a recorded message is amplified, allowing you to hear even small voices more easily. You can set “MAX” or “MID” for “V-UP LEVEL” in the menu (page 57). To resume normal playback Slide the V-UP switch back to “OFF.” Adjusting the playback speed – DPC (the Digital Pitch Control function) When you slide the DPC switch to “ON,” you can adjust the playback speed between +200% and –75% of normal speed in the menu. The message is played back in natural tones thanks to the digital processing function. 1 Slide the DPC switch to “ON.” 2 Adjust the playback speed in the “DPC” menu (page 51). To resume normal playback Slide the DPC switch to “OFF.” Playing Back a Specified Se...
Dieses Handbuch ist für folgende Modelle:Diktiergeräte - ICD-SX57 (2.32 mb)
Diktiergeräte - ICD-SX77 (2.32 mb)