Stimmen - 0, Durchschnittliche Bewertung: 0 ( )

Hersteller: Philips Dateigröße: 3.3 mb Dateiname: Unterrichtssprache:

The correct polarity is indicated on the inside of the battery compartment cover. Get started 3.1 Install the batteries The Pocket Memo can be operated with the two AAA batteries delivered with the product. Philips rechargeable batteries may also be used. See Use rechargeable batteries on page 27 for more information. 1 The on/off switch of the Pocket Memo must be in the OFF position. 2 Open the battery compartment on the back side of the Pocket Memo by sliding it outwards then folding it up. 4 Close the battery compartment by folding it down and sliding the battery compartment cover inward until it clicks. D Note Do not mix battery types! Use two rechargeable batteries (Philips LFH9154)or two non-rechargeable alkaline batteries. 3.2 Insert and eject the memory card The Pocket Memo operates with a SD (SecureDigital) memory card and supports SD cards with storage capacities of up to 2 GB. Your Pocket Memo is packaged with a memory card already inserted and formatted. To eject the memory card: 1 Locate the memory card slot on the top back side of the Pocket Memo. 2 Press the memory card into the Pocket Memo until it clicks. 3 Release the memory card. It will slightly emerge from the memory card slot. Simply slide it out. To insert a memory card: 1 Locate the memory card slot on the top back side of the Pocket Memo. 2 Slide the memory card into the slot. A small illustration under the memory card slot indicates the correct orientation. 3 Push the memory card in until it clicks. User manual D Note If the Pocket Memo is turned to the ON position and there is no memory card inserted, a warning screen is displayed. 3.3 Format a new memory card When a new, unformatted memory card (or a memory card that was formatted with a non- Pocket Memo device) is inserted, the Pocket Memo will display a prompt to format the memory card. 1 To confirm and start the formatting process, press the OK smart button. D Note Formatting is not possible if the memory card is in read-only mode (locked). 3.4 Activate the Pocket Memo The Pocket Memo is turned on and off by sliding the ON/OFF switch. When using it for the first time, you will be prompted to set the language, date and time. 3.4.1 Set the language When using the Pocket Memo for the first time, you will be prompted to set the language. ENGLISH 1 Press the + or – button on the Pocket Memo to select a language. 2 To cancel the formatting process, remove the memory card or press the CANCEL smart button. 2 Press the OK smart button to confirm the selection. The selected language will be displayed. Delete all: Yes - format !! ATTENTION !! OK CANCEL EXIT OK LANGUAGE LANGUE SPRACHE IDIOMA INT FR DE ES - / + Delete all: Yes - format !! ATTENTION !! OK CANCEL User manual 9 10 User manual 3 Press the + or – button to select a 12-hour or 24-hour clock, AM or PM (if a 12-hour clock is selected), and to change the value of the hour and minute settings. OK . DATE: 2009-11-01 12/24: TIME: 24 14:22 . . 4 Press the > smart button to confirm the date and time. The Pocket Memo is now ready to function. OK . DATE: 2009-11-01 12/24: TIME: 24 14:22 . . D Note If a mistake is made in setting the date/time, use the < smart button any time during the procedure to step back to make corrections. It is also possible to change the date and time later using the menu. See Menu settings on page 22 for more information. OK . DATE: 2009-11-01 12/24: TIME: 24 14:22 . . EXIT OK LANGUAGE LANGUE SPRACHE IDIOMA INT FR DE ES - / + D Note It is possible to change the language later using the menu. See Menu settings on page 22 for more information. 3.4.2 Set the date and time When using the Pocket Memo for the first time, you will be prompted to set the current date and time. 1 Press the + or – button to change the value for the year, month or day. OK . DATE: 2009-11-01 12/24: TIME: 24 14:22 . . 2 Press the > smart button to advance the arrow (^) to the next entry. After setting the day, press the > smart button to advance the settings to the correct time. OK . DATE: 2009-11-01 12/24: TIME: 24 14:22 . . 3.5 Power-save mode After sixty minutes of inactivity, the Pocket Memo automatically goes into power-save mode and the LCD screen will display the date and time. Press any button to reactivate it. If the Pocket Memo is not used for more than two hours, it turns off completely. Turn the unit on by moving the On/Off switch to the OFF position and then back to the ON position. ENGLISH User manual 11 12 User manual DPM 9380.DSS 0:00 #2 DPM 9380.DSS 0:00 #2 1 2 • The status LED glows in red (in overwrite mode) or green (in insert mode) while recording. • The following information is displayed: a Recording format b Recording time c Current position in the recording d File number e File name DPM 9380.DSS 0:34 #2 c d e a b 5 For short pauses, move the slide switch to the RECP position. To continue recording, move the slide switch back to the REC position. 6 To stop recording, move the slide switch to the RECP position and press ...

Herunterladen

Geben Sie zwei Ziffern: