Stimmen - 2, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
Phone jack 2. Stop / Eject button 12. Handle 3. Fast forward button 13. Volume control 4. Rewind button 14. Diai pointer 5. Play button 15. Function switch 6. Record button 16. Band selector 7. Cassette compartment 17. Power on indicator 8. Tuning knob 18. Rod antenna 9. Speaker 19. Battery compartment 10. Built-in condenser 20. AC socket microphone © © © © © © © © ANTENNA For AM Reception, the unit has a built-in ferrite bar antenna, Rotate the unit to obtain maximum reception. FM antenna To listen to FM broadcasts, extend the ROD ANTENNA to the most suitable length. Reception may be improved by turning the antenna to different direction. Notes: Be sure to re-insert rod antenna before raising or lowering the carrying handle, do not apply excessive force when handling the antenna because to do so may damage it. CASSETTE OPERATION 1. Push the STOP / EJECT button to open the cassette cover the cassette should be inserted so that the open part (where the tape is exposed) is facing upward, close the cassette cover completely. 2. Wet the FUNCTION SELECTOR to the "TAPE" position and then push the PLAY button. 3. Adjust the volume level with the VOLUME control. 4. To stop the tape push the STOP button. 5. When the tape comes to end, the unit stops automatically, and the power is turned off. 6. Push the STOP/EJECT button, the cover opens and the cassette can then be removed or reversed. POWER SOURCE To use with batteries (DC power source) How to insert batteries: 1. Place four UM-1 (or "D" size or HP-2) batteries in the BATTERY COMPARTMENT paying careful attention to the polarity. (Batteries not included) 2. Old batteries can leak and cause corrosion, so never leave rundown batteries in your unit, or replace at once. To use with household current: 1. Connect the AC power cord (included) to the AC SOCKET other side connect to the AC receptacle 2. This equipment must be disconnected from the mains when not in used. TO LISTEN TO THE RADIO 1. Set the FUNCTION SELECTOR to "RADIO" position. 2. Set BAND SELECTOR to the desired band. 3. Tune to the desired station by slowly turning the TUNING KNOB control. 4. Adjust the volume level with the SLIDE VOLUME control. 5. The radio can be turned off by setting the FUNCTION SELECTOR to the "TAPE” position. FAST FORWARD AND REWIND The tape can rapidly moved toward (to the left) by pushing the F.F. button, the tape can be rapidly rewind (to the right) by Pushed the REW button. RECORDING Recording through the Built-in Microphone 1. Set the FUNCTION SELECTOR to the "TAPE" position. 2. Push the RECORD button. 3. Recording can be made through the microphone. 4. The unit will be automatically turned off at the end of the tape Recording of radio broadcasts 1. Set the FUNCTION SELECTOR to "RADIO" position and tune to the radio broadcast where is to be recorded. Set the volume of radio to an ordinary volume level. 2. Push the RECORD button. 3. For playback set the FUNCTION SELECTOR to "TAPE" position rewind the tape to the beginning position and operated as described in PLAY button. PRIVATE LISTENING Plug the earphone (not included) into the HEADPHONE JACK this will automatically disconnect the SPEAKER. SPECIFICATIONS Frequency Range Antenna Tape Speed Wow & Flutter Recording system Output Power Speaker Power Source AM 530- 1700 KHz FM 88 - 108 MHz FM Telescopic Antenna FM Ferrite Core Antenna 4.75 cm/sce less than 0.35% rms (JIS) DC Bias 500mw 3" AC Power 120V / 60Hz DC 6VUM-1 (D’Size) x 4 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN A CAUTION’TO Reouce the risk of electric shock. ' DO NOT REMOVE SCREWS. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within on equilatera triangle, is intended to alert the usei to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to consitute a risk of electric shock to persons._ A The exclamation point within an equilaterat triangle is intend to alart the user to the presence of important operating and maintenance (servicing) in structions in the (literature accompanying the appliance. / CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. WARNING : TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DO NOT REMOVE COVER. N0 USER SERVICEABLE TARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. GRAPHICAL SYMBOLS WITH SUPPLEMENTARY MARKINGS ARE LOCATED ON BOTTOM OF THE UNIT IMPORTANT SAFEGUARDS FOR AUDIO PRODUCTS PLEASE READ CAREFULLY ALL THE FOLLOWING IMPORTANT SAFEGUARDS THAT ARE APPLICABLE TO YOUR APPLIANCE 1. All the safety and operating instructions should be read before the appliance is operated. 2. The safety and operating instructions should be retained for future reference. 3- All warning and cautions on the appliance and in the operating instructions sh...