Stimmen - , Durchschnittliche Bewertung:
(
)
)
Hersteller: Mountain Buggy
Dateigröße: 258.24 kb
Dateiname: 90dff9be-397b-424e-8abe-c3f36ea786c0.pdf
Unterrichtssprache:
Das Dokument wird geladen, bitte warten
 |
Das Dokument wird geladen, bitte warten
Anleitung Zusammenfassung
Raise handle until the side latches snap onto the locking pegs (Picture A). Shoulder Straps Check side latches to ensure they are locked in place; if they are not locked in place push down on latches (Picture B). Lift up on the front belly bar until it snaps into place (Picture C). Head Rest Locking Peg Waist Strap Front Wheel Side Latches Handle Rear Brake Without Wheel Rear Pouch CB Head Rest Side Latch Locking Peg Belly Bar Side Latches (not latched) 2 To lower belly bar pull forward on the spring D loaded latches (located on each side of the belly bar) then tilt down (Picture D). Locking Peg Side Latches (not latched) Spring Latches for Belly Bar Cap over Retaining Clip Rear Wheel Rear Support Hole Axle Rear Support Hole Step 2. Rear Wheel Asembly Push the wide end of the white retaining clip onto one end of the axle until it snaps into the groove. Press black cap onto retaining clip. Slide one rear wheel on the axle and insert the other end of the axle through both of the rear support holes (Picture E). Place the other rear wheel onto the axle (Picture F). Snap the retaining clip E onto the axle then press on black cap onto clip (Picture G). Step 3. Canopy Assembly Place the canopy so that the rounded edge is positioned behind the headrest, then snap it onto the back of the headrest. Bend the canopy and snap both sides onto the belly bar (Picture H). Assembly is now complete! F Rear Wheel Rear Axle Rear Brake G Cap Retaining Clip Rear Wheel H Head Rest Snap Belly Bar Snap Side Latches Latched 3 Use Instructions I To close stroller: Pull back on the side latches until they clear the locking pegs. The stroller will automatically fold when handle is pushed down or when the stroller is lifted off the ground (Picture I). To engage rear brakes: J Step lightly on the levers next to the rear wheels until the cogs of the brakes engage the cogs of the wheel. Repeat on other side. To release brake, lift levers with toe until cogs disengage (Picture J). Proper use of seat height adjustment, shoulder straps and waist strap: WARNING: Avoid Serious Injury from falling or sliding out. Always use seat belts 1. Place child in seat. Adjust the seat height by pulling or loosening straps located on the sides (Picture K). 2. Buckle waist strap around child’s waist and adjust to a snug fit (Picture K). 3. Make sure crotch strap buckle is between L the child’s legs, adjust length by sliding strap through plastic slide. Place shoulder straps over child’s shoulders and buckle into center crotch buckle. Adjust shoulder straps to a snug fit by sliding strap through plastic slide (Picture L). Replace padded covers over the shoulder straps. K Side Latch Locking Peg Belly Bar Side Latch Rear Pouch Child’s Mesh Foot Rest Rear Brakes Shoulder Straps Seat Height Adjustment Straps Waist Strap Seat Height Adjustment Strap Waist Strap Center Crotch Buckle Shoulder Strap without Padded Covers Waist Strap Center Crotch Buckle 4 To convert stroller to a frame carrier WARNING: Please request the help of another adult to help you put the frame carrier on. 1. With rear wheels locked, release the frame carrier waist strap cover located between the front legs. 2. Tilt the stroller back slightly, and slide the booties onto the front wheels. This will prevent your clothes being soiled by the wheels. 3. Release the waist buckle and sternum (chest) buckle (Picture M). 4. To close the stroller, step behind the stroller, pull back on the side latches until they clear the locking pegs, handle will automatically fold down when stroller/carrier is lifted off the ground. 5. With the help of another adult to steady the child in the seat, stand in front of the carrier. Place one arm through the shoulder strap and lift carrier onto your shoulder/back. You will find this much easier if the other adult also assists you with holding the other shoulder strap and guiding it over your other shoulder. 6. Once both shoulder straps are on, pull down on the shoulder strap ends to tighten. This will position the child higher onto your shoulders (Picture N). 7. Adjust the height of the sternum straps by sliding them up or down. Clasp the sternum buckle. Pull the ends of the sternum straps to tighten (Picture N). 8. Buckle the waist strap and pull end of the waist strap to tighten (Picture N). M N Shoulder Strap Waist Strap Cover Sternum Strap Sternum Buckle Waist Buckle Sternum Strap Shoulder Strap Ends Sternum Strap Waist Buckle Waist Strap Sternum Height Adjustment Slides 5 Care and Maintenance Check fasteners After one hour of use, check all fasteners to make sure they are secure. Adjust if necessary. Periodically check the stroller to ensure that it is in good operating condition. To clean seat. If cleaning is required, use a soft cloth with warm water and mild soap; air dry. DO NOT BLEACH. To clean canopy: Spot clean using a soft cloth with warm water and mild soap. DO NOT BLEACH. Do not put in a washing machine. To clean frame: Wipe using a soft cloth with warm wat...