Login:
Stimmen - 2, Durchschnittliche Bewertung: 4.5 ( )

Anleitung Century, modell PM-1016AA

Hersteller: Century
Dateigröße: 3.34 mb
Dateiname: 1beccc04-e61c-5ae4-190d-7b2c5ec1894f.pdf
Unterrichtssprache:en
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Anleitung Zusammenfassung


DEDICATED TO QUALITY IMPORTANT INFORMATION Table of Contents Page: 1 Important Information 2 Warnings 3 Assembly Opening Stroller Front Wheel Assembly Locking Footrest Rear Wheel Assembly Attaching Cup Holder 5 Car Seat/Stroller Use Locking Or Unlocking Rear Wheels Attaching Car Seat Removing Car Seat 7 Stroller Use Locking Or Unlocking Rear Wheels Closing Child’s Tray Slot Canopy Positions Child’s Tray Use Seat Back Positions Securing Child With Harness 9 Folding 10 Maintenance Cleaning Cup Holder Cleaning Stroller Dented Wheels 11 Replacement Parts Need Help? If you should have any problems with this product, call toll-free 1-800-837-4044 from anywhere in the U.S. or Canada or fax at 1-610-286-4555. Or write us at: Century Products P.O. Box 100 Elverson, PA. 19520-9974 Attention: Customer Service Department Please have the following information available. See label on stroller leg. Model Number: Manufacture Date: Date of Purchase: Safety First Checklist . Read and understand stroller instruction manual before using stroller. . Read and understand car seat instruction manual before using car seat in a vehicle. . Use the SmartFit® Base provided with this product only with a Century Assura™, SmartFit®, SmartFit® Plus, SmartFit® Elite, SmartFit® Elite V or SmartFit® SupremeV Infant Car Seat. . Never leave child unattended. . Use with only one (1) child at a time. . Do not use accessories other than those provided by Century. NOTE: All warnings and instructions apply whether stroller is being used with or without child’s tray in the use position. Weight and Height Limits Car Seat/Stroller Use: Maximum Weight: 22 lbs. (10 kg) Maximum Height: 27 inches (69 cm) Stroller Use: Maximum Weight: 40 lbs. (18.2 kg) Maximum Height: 40 inches (101 cm) Save instruction manual for future reference. WARNINGS Failure to follow all warnings and instructions could result in serious injury or death. • Never leave child unattended, even when sleeping. -Child may become entangled in harness straps and suffocate. -Stroller may roll away and crash even with brakes engaged. • Avoid serious injury from falling or sliding out. Always use seat belt. • DO NOT pull or carry stroller on stairs or escalators with child in it. • DO NOT lift car seat/stroller unit by car seat handle or car seat shell. Handle may break. • DO NOT allow child to climb unassisted into stroller, play, hang or pull down on car seat or stroller handle as stroller may tip over. • DO NOT hang anything on handle or canopy. Stroller may become unstable and tip over. • DO NOT jog with stroller. Push stroller at a normal walking speed only. Fast walking, jogging or running can cause loss of control. • DO NOT overload basket. Maximum basket weight is 10 lbs. (4.5 kg). Stroller may become unstable and tip over. • DO NOT use accessories other than those provided by Century. 1 Hold swivel wheel assembly upright (Tab pointing down). 2 Tilt stroller slightly back and push wheel assembly onto leg until it locks in place. Repeat steps 1 and 2 for opposite leg. CAUTION: After wheel assembly is complete, pull on 1 Stand stroller upright and wheels to check that they are locked in place. rotate lever to release latch. 2 Spread handle and rear legs until both Fold Locks “click” into position. ASSEMBLY 3 Opening Stroller Front Wheel Assembly Tab Push footrest down so that Cross Tube is centered between three (3) Tabs on bottom of footrest, and it snaps in place. Locking Footrest Tabs 1 Remove axle protectors from ends of axle and discard. 2 With stroller laying face down on floor, slide brake lever brackets onto rear legs until you hear a click. NOTE: Brake levers must face rear of stroller. Rear Wheel Assembly Fold Locks Cross Tube ASSEMBLY continued Attaching Cup Holder 3 Secure Wheel to Axle as shown: • Slide Wheel onto end of Axle with brake ribs facing in. • Slide Wheel Retainer onto end of Axle. Make sure large end of Wheel Retainer is towards Wheel. Wheel Retainer should snap into groove on end of Axle. • Snap wheel Retainer Cap over Wheel Retainer. • Line up Hub Cap tabs with slots in Wheel and snap Hub Cap in place. Hub Cap Retainer Wheel Retainer Axle Wheel Cap CAUTION: • Failure to install retainer cap may cause wheels to come off of stroller. • After wheel assembly is complete, pull on wheels to check that they are locked into place. Snap one end of cup holder over stroller frame above canopy, rotate down to opposite side and snap in place. WARNING • To avoid burns, never put hot liquids in cup holder. • Avoid possible tipping, DO NOT place more than 3 lbs. (1.4 kg) in cup holder. WARNING Prevent a possible choking hazard, discard axle protectors and polybag which contained rear wheel parts. 1 Set both rear brakes to prevent stroller from moving. 2 Position child’s tray in up position: • Rotate child’s tray over lower edge of seat. • Push child’s tray into slots. • Pull on child’s tray to be sure it is securely locked. 1 LOCKING: Push down on both brake levers. 2 UNLOCKING...


Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien