Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
214 214 Forward Facing Seat Rear Facing Seat Using the Basket Frame for basket attachmentSnaps Do not place more than 11 lbs. in the basket. Remove all items from basket before folding stroller. Hook (2x) ZipperHookRearStabilizerBarRearStabilizerAxle Attaching 1. Attach sides of basket to frame of stroller using snaps. 2. Snap both basket hooks onto rear stabilizer bar. 3. Insert hook into rear stabilizer bar cover to secure basket. Frame for basket attachmentSnaps Hook (2x) ZipperHookRearStabilizerBarRearStabilizerAxle Removing Reverse the procedure for attaching. Recline Lever Reclining the Seat Never use seat in reclined position unless the permanently attached safety cover is used. CAUTION Seat will fold if pushed forward. CAUTION Be careful when reclining the backrest while your baby is in the stroller to prevent abrupt changes in seating position. Recline Lever Pull the recline lever and gently adjust backrest to any three positions. Using the Safety Cover CAUTION Before folding the stroller, unfasten and store the safety cover under the seat. The stroller will not fold with it attached. Never use seat in reclined position unless the permanently attached safety cover is used. 1. Lift the seat cushion and pull the safety cover out. 2. Wrap the velcro straps around the tray belt and route the side velcro straps through the loop underneath the seat cushion. (Located on the bottom of the Kid’s Tray.) 3. Fasten the velcro straps to secure. Using the Swivel Wheels Using the Brakes To lock brakes, push both brake levers down. To unlock brakes, lift both brake levers up. UnlockLock LockUnlock To lock swivels, lift both swivel lock levers up. To unlock swivels, push both swivel lock levers down. CAUTION Push the stroller forward to ensure that the brakes are properly engaged. Using the Kid’s Tray To prevent damage to the stroller, never push down or pull up on tray once it is attached to stroller. 1. Squeeze the release buttons on both sides and lift up to release, 2. When released, it allows easy access to the seating area. 3. To attach the Kid’s Tray, slip it over the armrest pins until you hear the pins click into position. Using the Seat Extension Seat Extension 1. Lift the seat cushion and locate the seat extension. 2. Pull out the seat extension on both sides. 3. Attach snaps on seat cushion to snaps on seat extension. When not in use push the seat extension back to the original position. Kid’sTrayElastic Seat ExtensionBottom of Boot Using the Boot 1. Pull out seat extension and attach seat cushion. 2. Fit boot onto seat extension 3. Attach snaps on boot to snaps on side of the stroller. 4. Attach elastic to Kid’s Tray. Snaps Folding the Stroller CAUTION Folding levers should be operated only when folding the strollers. Perform the following operations before folding: Forward Facing Seat 1. Lock both front swivel wheels. 2. Ensure Kid’s Tray is attached at both sides. 3. Fold the canopy toward the handle. Rear Facing Seat 1. Lock both front swivel wheels. 2. Ensure Kid’s Tray is attached at both sides. 3. Fold the canopy away from the handle. 3 3 WARNING Before use, make sure stroller locking mechanism is in the locked position. 5. Slide indicator to right so that red label is visible. 6. Press and hold release button while lifting handle up and toward front of stroller. Locked Unlocked Using the Harness Avoid serious injury from falling or sliding out. Always use the 5-point harness. Unbuckling the Harness Buckle TongueWaistBeltWaistBeltRelease Button2 inches1.2inchesBackRestCrotchBelt Unbuckling the Harness 1. Press levers down on right and left harness hooks to detach from buckle tongues. 2. Press buckle button down (with Combi logo) and detach buckle tongues from buckle. Buckling the Harness 1. Place the crotch belt between the baby’s legs. 2. Insert buckle tongues into buckle. 3. Lift buckle with tongues inserted and attach right and left hook to holes in buckle tongue 4. To adjust the harness or waist belt, loosen the slack on both sides of each buckle tongue. Buckling the Harness Removing and Attaching the Seat Cushion and Eggshock Pad Removing CAUTION If seat cushion is ripped or torn, do not use. Do not use the stroller without the seat cushion. 1. Unbuckle the 5-point harness and pull all the straps through the seat cushion. 2. Unsnap seat cushion from seat extension. 3. Unhook elastic bands from backrest. 4. Grasp seat cushion and Eggshock foam and remove from seat. WARNING Always ensure at least 1.2 inches of waist belt is visible after routing is complete. Attaching BackrestHeadrest 1. Pass the 5-point harness straps through the appropriate locations in the Eggshock foam and seat cushion. 2. Fit seat cushion over backrest. 3. Attach all elastic bands. Using the Canopy CAUTION Failure to fully secure the canopy holders can cause the holders to bend. When storing the stroller by laying it down, be sure the canopy is off the ground to prevent it from bending. Attaching Fully insert the canopy h...