Stimmen - 4, Durchschnittliche Bewertung: 4.8
(
)
)
|
Anleitung Zusammenfassung
PHYSICAL LEARNING ARCADE SYSTEM Requires four “D” (LR20) alkaline batteries (not included) for operation. Age: 3-6 years This product is intended for indoor use only. Use ONLY alkaline batteries for longest battery life. sher-price.com Get up. Get smart. Get going! Get up. Get smart. Get going! It’s a stationary bike, a learning center, and an arcade game system – all rolled into one! Smart Cycle® plugs right into your TV, ready to take kids on learning adventures like no other. As they pedal, favorite character friends guide them through learning discoveries, games, and even exciting races. Drive Pedal, steer and learn at your own pace – visit Math Mountain, Shape Lake, Number Fields, Letter Creek and other stops along the way. Learn Stop and rest, but don’t stop learning! Use the joystick to reinforce important learning skills with plenty of games and activities – with different levels for growing kids. Race Put the pedal to the metal as you race with cars on-screen, against the clock, or with another player! Safety Tips • Always sit on the seat. • Always wear shoes. • Only one (1) rider at a time. Parts Parts Handlebar Frame Seat Post with Console Front Base (Small) Seat Pedal Assembly Back Base (Large) Plug-and-Play Cord Learning Adventure Frame Cover (with Bolt) Game Cartridge with Key Ring Adult assembly is required. Tool needed for assembly: Phillips screwdriver (not included). #8 x 1,25" Screw - 14 Shown Actual Size Note: Tighten and loosen all screws with a Phillips screwdriver. Do not over-tighten screws. Assembly Assembly This product contains small parts in its unassembled state. Adult assembly is required. 1 Pedal Assembly Frame • Fit the pedal assembly into the groove in the underside of the frame, as shown. Hint: The pedal assembly is designed to only fit one way. If it does not seem to fi t, turn it around and try again. • Insert four screws into the pedal assembly. Fully tighten the screws. Front Base (Small) 2 • Fit the front base (small) onto the bottom of the frame, as shown. Hint: The front base is designed to fi t onto the frame one way. If it does not seem to fi t, turn it around and try again. • Insert four screws into the front base and tighten. Seat Post Rear Base (Large) 3 CAUTION • Fit the rear base (large) onto the end of the seat post, as shown. Hint: The rear base is designed to fi t onto the seat post one way. If it does not seem to fit, turn it around and try again. • Insert two screws into the rear base and tighten. Assembly Assembly 4 • Turn both the frame and seat post assemblies upright. • Fit the seat post assembly onto the frame assembly. • Insert two screws into the seat post and tighten. Hint: You may want to insert the frame cover with bolt into the frame assembly before inserting and tightening screws in the post. Handlebar 6 Frame Cover (with Bolt) 5 • Insert the frame cover with bolt into the hole on the side of the frame assembly. • Fully tighten the bolt. • Fit the handlebar onto the frame, as shown. Hint: The handlebar will only fit one way onto the console. If it does not seem to fi t, turn it around and try again! • Insert two screws into the handlebar and tighten. • Pull up on the handlebar to be sure it is secure. Assembly Seat 7 Assembly Seat 7 • At an angle, fit the upper tabs on the front of the seat into the slots on the seat post. • Lower the seat to fit the bottom tabs on the seat into the slots on the seat post. You should hear a "click". • Push down on the seat to be sure it is secure. 8 Seat Height 3 (Shortest) Seat Height 2 Seat Height 1 (Tallest) • For your child's comfort, the seat can be adjusted to any of three seat heights (upper slots for shorter children and lower slots for taller children). • To remove the seat, press the tabs underneath and lift. • Replace the seat at the desired height and push down on the seat to be sure it is secure in the slots in the seat post. • Locate the battery compartment on front of the frame. Loosen the screw in the battery compartment door and remove the door. • Insert four “D” (LR20) alkaline batteries. Hint: We recommend using alkaline batteries for longer battery life and proper function. • Replace the battery compartment door and tighten the screw. • If this product begins to operate erratically, you may need to reset the electronics. Slide the power switch off and then back on. • When function is erratic or stops, or you see a low battery symbol on your TV screen , it’s time for an adult to change the batteries! • Protect the environment by not disposing of this product with household waste (2002/96/EC). Check your local authority for recycling advice and facilities (Europe only). 1,5V x 4 “D” (LR20) Battery Installation Battery Safety Information In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your toy. To avoid battery leakage: • Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc) or rechargeabl...