Stimmen - 1, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
Adult assembly is required for battery installation. Tool required for battery installation: Phillips screwdriver (not included). Track not included and sold separately. Battery Installation 1.5V x 6 “AAA” (LR03) • Protect the environment by not disposing of this product with household waste (2002/96/EC). Check your local authority for Note: We recommend the use of alkaline recycling advice and facilities batteries for longer battery life. (Europe only). IMPORTANT! Under normal use conditions, the batteries in the vehicle will require replacement more often than the batteries in the remote controller. Remote Controller • Locate the battery compartment on the bottom of the remote controller. • Loosen the screw in the battery compartment door with a Phillips screwdriver. Remove the battery compartment door and insert three “AAA” (LR03) alkaline batteries. • Replace the battery compartment door and tighten the screw with a Phillips screwdriver. Do not over-tighten. • If this product begins to operate erratically, you may need to reset the electronics. Remove the batteries and replace them in the toy. Engine • Locate the battery compartment on the back of the engine. • Loosen the screws in the battery compartment door with a Phillips screwdriver. Lower the battery compartment door and insert three “AAA” (LR03) alkaline batteries. • Close the battery compartment door and tighten the screws with a Phillips screwdriver. Do not over-tighten. • If this product begins to operate erratically, you may need to reset the electronics. Remove the batteries and replace them in the toy. 2 Battery Safety Information In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your toy. To avoid battery leakage: • Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium). • Insert batteries as indicated inside the battery compartment. • Remove batteries during long periods of non-use. Always remove exhausted batteries from the toy. Dispose of batteries safely. Do not dispose of the product in a fire. The batteries inside may explode or leak. • Never short-circuit the battery terminals. • Use only batteries of the same or equivalent type, as recommended. • Do not charge non-rechargeable batteries. • Remove rechargeable batteries from the toy before charging. • If removable, rechargeable batteries are used, they are only to be charged under adult supervision. ICES-003 • This Class B digital apparatus complies with Canadian ICES-003. • Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. NMB-003 • Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada. • L’utilisation de ce dispositif est autorisee seulement aux conditions suivantes : (1) il ne doit pas produire de brouillage et (2) l’utilisateur du dispositif doit etre pret a accepter tout brouillage radioelectrique recu, meme si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. 3 4 Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. ©2009 Mattel, Inc. All Right Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. PRINTED IN CHINA R9107pr-0920 All Aboard • Hook the cars together and place them on the fl oor. Make sure the engine is in front. • Press the power button on top of the engine. The ready light turns on. • Hold the remote controller with the stick facing you. Point the remote controller toward the vehicle and push the stick forward 1 . The vehicle moves forward. • Pull the stick back a little to stop the vehicle 3 . • Pull the stick all the way back and the vehicle travels in reverse 4 . Release the stick to stop 3 . 4-Position Remote Controller 2 3 4 1 2 3 4 FORWARD (WITH SOUND EFFECTS) FORWARD OFF REVERSE POWER BUTTON READY LIGHT Hints: • We do not recommend using the engine on carpets. For best performance, use on hard, fl at surfaces. • If you do not operate the remote controller for a few minutes, the vehicle shuts off and the ready light turns off. Press the vehicle power button and operate the remote controller to restart. • This toy works best if you have a clear path between the remote controller and the vehicle. • Point the remote controller at the vehicle. The maximum range of the remote controller is about 12 feet (3.7m). • Wipe the toy with a clean, damp cloth. Do not immerse. 1 Troubleshooting PROBLEM SOLUTION Vehicle drives slowly Battery power in the vehicle may be weak. Replace all three batteries in the vehicle with fresh, alkaline batteries. The wheels on the vehicle may be dirty. Wipe them with a clean cloth. Vehicle does not respond to the remote controller Battery power in the remote controller may be weak. Replace all three batteries in the remote controller with fresh, alkaline ba...