Stimmen - 2, Durchschnittliche Bewertung: 3 ( )

Hersteller: Fisher-Price Dateigröße: 446.89 kb Dateiname: Unterrichtssprache:

• Fit a front axle cover on the front axle on one fork arm. • Insert two 5/8" screws through the front axle cover and into the fork. Tighten the screws with a Phillips screwdriver. Do not over-tighten. • Repeat this procedure to attach the front axle cover to the other side of the front wheel assembly. Groove Front Axle Cover Groove Pointed End 5 Pedal Assembly Front Axle Fender Fork Fork Arm Front Axle Front Wheel Assembly • Snap the frame cover (wider side facing forward) on the underside of the frame. • Insert the fork post through the frame hole making sure the pointed end of the fender faces forward. • Fit the handlebar onto the fork post. • Place the key console on the center of the handlebar, so that the key faces the rear. • Align the key console holes with the handlebar holes and insert two 11/4" screws through the front and back of the key console. Tighten the screws with a Phillips screwdriver. Do not over-tighten. Pointed End Wider Side Faces Forward 6 Assembly Frame Cover Frame Fork Post Frame Fork Post Handlebar Key Console Handlebar • Place the tank on the frame, as shown. • Align the hole in the tank with the hole in the frame. • Insert one 5/8" screw through the tank and into the frame. Tighten the screw with a Phillips screwdriver. Do not over-tighten. • Insert the back tab on the booster seat first and then press down on the front to secure the two front tabs. • As your child grows, the booster seat may be removed. To remove, insert a flat end screwdriver into the front slots and push up. • Insert the left rear peg on the seat into the left opening on the frame. • Position the right rear peg on the seat above the right opening and snap firmly into place. Helpful Hint: Check your child's fit on the Tough Trike by observing the seat to pedal distance as it is being ridden. If the pedals seem too far away for your child, attach the booster seat. Front Slots Peg Back Tab 7 Assembly Tank Frame Seat Frame Attach Remove Front Tabs Fisher-Price, Inc., 636 Girard Avenue, East Aurora, New York 14052, warrants to the original owner that the Tough Trike is free from all defects in material and workmanship when used under normal conditions for a period of three (3) years from the date of purchase. Should the product fail to perform properly, we will repair or replace it at our option, free of charge. Purchaser is responsible for shipping the product to Fisher-Price Consumer Affairs at the address indicated above and for all associated freight and insurance cost. Fisher-Price, Inc. will bear the cost of shipping the repaired or replaced item to you. This warranty is void if the owner repairs or modifies the product. This warranty excludes any liability other than that expressly stated above including but not limited to any incidental or consequential damages. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE. • Check the plastic parts regularly and if broken or cracked, dispose of them properly. • Check all fasteners regularly to be sure they are tight. If the fasteners are not tight, tighten them as necessary. • To clean the Tough Trike, use a mild soap and water solution and clean cloth. Rinse clean with water to remove soap residue. ©1997 Fisher Price, Inc., a subsidiary of Mattel, Inc., East Aurora, New York 14052 8 Printed in U.S.A. 72643, 72644 1 72643-0920 • Proper label application will help to keep the labels looking their best! • Wash your hands before applying the labels. • Make sure areas where the labels will be applied are clean and dry. Wipe the Tough Trike with a clean, soft, dry cloth to remove any dust or oils. • Apply the labels as shown in the illustration above. • For best results, avoid applying a label more than once. • After applying a label, rub the label firmly with a cloth to make sure the label is adhered to the Tough Trike. Assembly Maintenance Three (3) Year Limited Warranty 22A 9 3 Assembly is now complete. 22B If you have any questions about this product: In Canada, call 1-800-567-7724, or write to: Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2. In Great Britain, telephone 01734 770488. In Australia, call the Fisher-Price Australian Consumer Advisory Service toll-free at 1-800-800-812, or write to: Fisher-Price, Mattel Pty. Limited, 461 Plummer Street, Port Melbourne, Victoria 3207. Questions? We'd like to hear from you! Call Fisher-Price® Consumer Affairs, toll-free at 1-800-432-KIDS, 8 AM - 6 PM EST Monday through Friday. Hearing-impaired consumers using TTY/TDD equipment, please call 1-800-382-7470. Or, write to: Fisher-Price® Consumer Affairs, 636 Girard Avenue, East Aurora, New York 14052. Model Number 72643 Mode...

Herunterladen

Geben Sie zwei Ziffern: