Stimmen - 0, Durchschnittliche Bewertung: 0 ( )

Hersteller: Philips Dateigröße: 3.2 mb Dateiname: Unterrichtssprache:

9) On average you will need to pump for 10 minutes to express 60-125ml or 2-4oz. However, this is just a guide and varies from woman to woman. If you find that you regularly express more than 125ml per session, please use a 260ml/9oz AVENT bottle or 240ml/8oz VIA cup. Do not overfill Philips AVENT feeding bottles or VIA cups and keep upright, otherwise milk may leak from below the pump body. 10. Storing your breast milk • Breast milk can be stored in the fridge or freezer in either sterile breast milk containers (125ml/4oz or 260ml/9oz bottles fitted with sealing discs) or in VIA cups with lids. • Only milk collected with a sterile pump should be stored to be fed to your baby. • Expressed milk should be refrigerated immediately. • Expressed breast milk can be stored in the refrigerator for up to 48 hours (not in the door) or in the freezer for up to 3 months. • If you are storing milk in the fridge to add to during the day, only add milk which has been expressed into a sterile container. Milk can only be kept like this for a maximum of 48 hours (from first expression) after which it must be used immediately or frozen for future use. • For products other than breast milk make feeds up fresh when needed, following the manufacturer’s instructions. Storing your milk in the fridge If your expressed breast milk will be fed to your baby within 48 hours, it can be stored in the fridge (not in the door) in an assembled Philips AVENT feeding bottle or VIA feeding system. Assemble a sterilised teat, screw ring and dome cap and attach onto the body of the Philips AVENT bottle or the VIA adaptor and cup (see below). GB GB Storing your milk in the freezer To store in the freezer, use a sealing disc in place of the teat and dome cap or use a sterilised VIA lid to seal the VIA cup. The storage containers should be clearly labelled with the date and time of expression and older milk used up first. NEVER refreeze breast milk. DO NOT add fresh breast milk to already frozen milk. ALWAYS discard any milk that is left over at the end of a feed. 11. Feeding your baby your expressed breast milk If breast milk has been stored in an AVENT Breast Milk Container, replace the sealing disc with a sterilised AVENT teat. Alternatively replace the VIA lid with a sterilised VIA adaptor, screw ring, dome cap and AVENT teat. Frozen breast milk should be defrosted overnight in the refrigerator. However, in an emergency, it can be defrosted in a jug of hot water. Once thawed use within 24 hours. Breast milk can be heated in the same way as any other bottle feed. stand the Philips AVENT bottle or VIA feeding system in a bowl of hot water, or alternatively, for a safe and fast way to warm feeds, use the Philips AVENT bottle and baby food warmer. IMPORTANT! Milk or food will heat faster in VIA cups than in standard feeding bottles/ containers. Always check milk or food temperature before feeding. Never heat milk in a microwave as this may destroy valuable nutrients and antibodies. In addition, the uneven heating may cause hot spots in the liquid which could cause burns to the throat. Never immerse a frozen milk container or VIA cup in boiling water as this may cause it to crack/split. Never put boiling water directly into a VIA cup, allow to cool for around 20 minutes before filling. GB GB 12. Choosing the right teat for your baby AVENT teats can be used on both the Philips AVENT feeding bottle and VIA feeding system. AVENT teats are clearly numbered on the side to indicate flow rate. 0m+ 1 1 hole 324 1m+ 3m+ 6m+ 3m+ NEWBORN FLOW EXTRA SOFT SILICONE TEAT Ideal for newborns and breastfed babies of all ages. SLOW FLOW EXTRA SOFT SILICONE TEAT Ideal for newborns and breastfed babies of all ages. MEDIUM FLOW SOFT SILICONE TEAT For bottle fed babies at 3 months of age and up. FAST FLOW SOFT SILICONE TEAT Offers a faster flow for older babies. VARIABLE FLOW SOFT SILICONE TEAT – SLOT CUT Provides an extra fast flow and accommodates thicker liquids. Flow rate can be varied by turning the bottle to align the I, II or III markings on the teat with baby’s nose. 2 holes 3 holes 4 holes 1 slot 13. Troubleshooting guide GB Lack of suction Check that all the pump components have been assembled correctly and that the white valve is the right way up. Ensure that the diaphragm and Let-down Massage Cushion are fitted securely to the pump body and a perfect seal is created. No milk being expressed Ensure suction is created and the pump is correctly assembled. Relax and try again, expression may improve after practice. Please refer to the ‘Hints to help you succeed’ section. Pain in the breast area when expressing You may be pumping too hard. You do not need to use all the suction the pump can generate. Try depressing the handle halfway and remember the 2-3 second pumping rhythm. Consult your health professional/ breastfeeding advisor. Milk is drawn up the Remove and refit the Let-down Massage Cushion Let-down Massage ensuring it is firmly attached and pushed far enou...

Herunterladen

Geben Sie zwei Ziffern: