Stimmen - 0, Durchschnittliche Bewertung: 0 ( )

Hersteller: Philips Dateigröße: 1.11 mb Dateiname: Unterrichtssprache:

This Philips 3-in-1 Nutrition Centre is a steriliser, a bottle warmer and a food steamer all in one. It enables you to safely and quickly heat baby bottles and jars of baby food, to keep them warm, to disinfect baby bottles and small objects and to steam all kinds of vegetables and fruit.The unique design fits all baby bottles and jars of baby food, while the temperature control system ensures the highest safety standards. Philips Baby Care: taking care together important Read these instructions for use carefully before using the appliance and save them for future reference. general description (Fig. 1) , , ,, ,,,,,,, , , ,,,, , ,,, , , Check if the voltage that is indicated on the appliance corresponds to the local mains voltage before you connect the appliance. This appliance is suitable for mains voltages from 0 to 0 volts. If the mains cord is damaged, it must be replaced by Philips, a service centre authorised by Philips or similarly qualified persons in order to avoid a hazard. Do not expose the appliance to extreme heat or direct sunlight. Never disassemble the base to avoid the risk of electric shock. Never use the base without water in it. Only use pure tap water without any additives. Do not put bleach, descaling agents or other chemicals in the appliance. Do not immerse the base, the mains cord or the mains plug in water or any other liquid. Always let the appliance cool down before moving or storing it. The appliance becomes extremely hot when it is in use and may cause burns if it is touched. Always lift the lid, the cap and the cover by their handle. Beware of hot steam that comes out of the vent in the cover when the appliance is in use without the cap. Steam can cause burns. Never move or open the appliance when it is in use or when the water in it is still hot. Always place and use the appliance on a dry, stable, level and horizontal surface. Do not place the appliance on a hot surface or in a heated oven. Keep the appliance out of the reach of children. Do not let the mains cord hang over the edge of the table or worktop on which the appliance stands. Only use baby bottles that have been approved for boiling. Use and store the appliance at a temperature between 10°C and 35°C. Always pour any remaining water out of the appliance after use. Test food on the back of your hand before serving it, to ensure that it is at a safe temperature for your baby. Always unplug the appliance after use. Never place items on top of the appliance when it is in use. A Steriliser lid B Basket C Container D Protective grid E Water reser voir F Mains cord G Control knob EngliSh H Measuring cup I Base with heating element J Indicator LED K Cord storage brackets L Cap M Cover N Cover handle O Steaming bowl P Base with heating element Preparing for use 1 3 Place the Nutrition Centre on a dry, stable, level and horizontal surface out of the reach of children. Unwind the required length of mains cord from the cord storage brackets in the base. Insert the mains plug into the wall socket. The indicator LED starts to burn green. , The Nutrition Centre is now in standby mode. The appliance does not heat up until you press and turn the control knob to select a setting. using the appliance temperature overview Babies like their milk and food to be at a temperature of 37°C.The control knob enables you , to set the correct food temperature.The setting depends on the amount, consistency and current temperature of the milk or food. (Fig. ) -y refrigerator temperature (approx. 10°C.) -. room temperature (approx. 20°C.) -mbottle contents up to 200ml -, minimum bottle contents approx. 60ml Note:If all the water has evaporated before the heating process is completed, the 3-in-1 Nutrition Centre starts to beep and the indicator LED starts to blink red. If this happens, press the control knob to interrupt the heating process and fill the water reservoir. heating heating baby bottles 1 3 Pour 0ml water into the water reservoir with the measuring cup. (Fig. 3) Remove the cap from the cover (1) and place the cover on the base ( ). Place the bottle on the protective grid in the base (3). (Fig. ) Look up the desired setting in the temperature overview. The setting depends on the amount of milk in the bottle and the current bottle temperature. Press (1) and turn ( ) the control knob to the desired setting. (Fig. 5) The indicator LED starts to burn red continuously and you hear a beep to indicate that the , heating process has started. The heating process takes up to about 5 minutes, depending on the quantity and the , temperature of the milk. When the milk has reached the right temperature, you hear three beeps.The indicator LED , blinks red three times and then turns green. 5 Take the bottle out of the appliance and unplug the appliance. EngliSh Note:Always test the milk on the back of your hand first to ensure it has a safe temperature for your baby. heating jars of baby food 1 3 , , , Pour 0ml water into the water reservoir with the me...

Herunterladen

Geben Sie zwei Ziffern: