Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Eugene, OR 97402 : PH 541.687.1644 800.423.8445 FAX 541.687.0436 : tojrleyatojrley.com : i3L-Ji=^L_^b=^ Owner’s Instruction and Safety Manual Baby Snuggler o Stroll Jog babsO snuggler For use while strolling and jogging ONLY. DO NOT USE WHILE CYCLING OR SKIING. Baby Snuggler Installation Instructions For use while strolling and jogging ONLY. DO NOT USE WHILE CYCLING OR SKIING. Recommended age: 3 to 12 months Approximate height: 25"-30" (63-76cm) Weight: 15-21 lbs. (7-1 Okg) NOTE: The Burley Baby Snuggler can be used in any Burley child trailer with the stroller/jogger option and the 5-point harness system (2003 and later), but works best on those models with seat pad attachment strips on the child seat. For more information, consult your Authorized Burley Dealer or visit Installation SOLO TRAILER, ONE INFANT: 1. Remove existing shoulder harness pad and seat pad. Insert shoulder straps through openings in Baby Snuggler back. Use the lower strap openings for a shorter infant, and the upper openings for a longer infant. FIGURE A 2. Insert crotch strap through opening in Baby Snuggler bottom. FIGURE A 3. Slide padded tubes onto shoulder straps, with straps oriented so that FLAT parts of male buckles face each other. FIGURE A 4. Position infant in Baby Snuggler, with infant’s lower back centered on the Snuggler’s lumbar support. 5. Snap male buckles into Y-buckle, with Y-buckle positioned at infant’s sternum. Adjust straps so infant cannot move too far forward in Snuggler. FIGURE A 6. To secure head and shoulders, adjust side tension cords and toggles. The upper Snuggler will narrow, cradling the infant’s head. To change angle of infant’s legs, adjust side straps. FIGURE C 7. Fasten and adjust lap belt snugly below the Y-buckle, making sure infant is comfortable and able to breathe normally. FIGURE B Seat Belt Snugly Fastened FIGURE B: Baby Snuggler Installation in d’lite Trailer FIGURE C: Baby Snuggler in Reclining Position DOUBLE PASSENGER TRAILERS, ONE INFANT: Install Baby Snuggler In center of trailer, using the two center shoulder straps and center crotch strap. FIGURE B Follow steps 1-7. SINGLE PASSENGER MUST BE SEATED IN CENTER POSITION. DOUBLE PASSENGER TRAILERS, ONE INFANT, ONE CHILD: Install Baby Snuggler on one side of trailer, using shoulder straps and crotch strap on that side. Follow steps 1-7, positioning infant and making Baby Snuggler adjustments before placing child in trailer seat. DOUBLE PASSENGER TRAILERS, TWO INFANTS: Install Baby Snugglers using both shoulder harnesses and two outer crotch straps. Follow steps 1-7. FOR TRAILERS WITH RECLINING SEAT FEATURE: For added comfort, make the following adjustments to your trailer: 1. Loosen tension on the upper and lower straps behind the trailer seat. 2. Place Baby Snuggler in trailer, with Baby Snuggler bottom toward the front of the trailer seat. Lengthen crotch strap. FIGURE C 3. Follow steps 1-7. CHILD SEAT MUST ALWAYS BE SECURED WHEN TRAILER IS IN USE. Consult your Burley trailer manual for more information about the reclining seat feature. If you do not have a copy of your trailer instruction manual, do not use the Burley Baby Snuggler. To replace your manual, go to A WARNING ALWAYS SECURE CHILDREN WITH HARNESS AND LAP BELT BEFORE USE. SECURE ACCORDING TO INSTRUCTIONS ON TRAILER SEAT LABEL AND IN OWNER’S MANUAL. CONSULT A PEDIATRICAN BEFORE USING THIS PRODUCT. NEVER LEAVE A CHILD UNOBSERVED OR UNATTENDED. FAILURE TO DO SO COULD RESULT IN AN ACCIDENT AND SERIOUS INJURY OR DEATH....