Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
My Little Desk Bed is recommended for children who are at least 15 months old and are ready to progress from a crib to a bed, including being able to get on and off a bed unassisted. Maximum weight: 50 lbs. Tools needed for assembly: Hammer and Two Phillips Screwdrivers. WARNING • Use only a full size crib mattress at least 271/4" (690 mm) by 515/8" (1310 mm) by 5" (127 mm) thick. • Never place bed near windows where cords from blinds or drapes may strangle child. • Regularly inspect bed for damage. DO NOT use bed if any parts are missing or broken. Call Fisher-Price (1-800-432-KIDS in U.S.) for replacement parts and instructions if needed. DO NOT substitute parts. • Make sure the space between the bed and the wall or other furniture is less than 23/8" or more than 8". Message to Parents Failure to follow these warnings and the assembly instructions could result in a serious injury or death from entrapment or strangulation. Failure to follow these warnings and the assembly instructions could result in a serious injury or death from entrapment or strangulation. Occasionally a consumer may experience a problem with one of our products. If this should happen, please call us, toll-free, rather than return this product to the store. Usually we can solve the problem on the telephone or by sending you replacement parts. Please call Fisher-Price Consumer Affairs, toll-free at 1-800-432-KIDS, 8 AM - 6 PM EST Monday through Friday. Hearing-impaired consumers using TTY/TDD equipment, please call 1-800-382-7470. Or, write to: Fisher-Price Consumer Affairs, 636 Girard Avenue, East Aurora, New York 14052. Toddler Bed Assembly • Please save all packaging material until assembly is complete to ensure no parts are discarded. • Before assembling My Little Desk BedTM, please wipe each part with a clean, dry cloth. Fisher-Price Curved Side Rail – 2 Straight Side Rail – 2 Crimped Mattress Tube – 4 Mattress Tube – 2 Left Side Panel Right Side Panel Headboard Footboard #10 – 24 x 11/4" Screw – 2 #10 – 24 x 1/2" Barrel Nut – 10 (ALL SHOWN ACTUAL SIZE) #10 – 24 x 11/2" Screw – 8 Mattress Retainer – 2 ©1997 Fisher-Price, Inc., East Aurora, New York 14052 2 79415 3 79415-0920 Toddler Bed Assembly 1 Straight Side Rail Crimped Mattress Tubes Straight Side Rail Crimped Mattress Tube CAUTION Please keep small parts and plastic bags out of children’s reach. Dispose of plastic bags properly. Helpful Hint: The assembly of the crimped mattress tubes to the straight side rail is permanent. Once assembled properly, you will be unable to remove the crimped mattress tubes. • Place one of the straight side rails on a soft, flat surface. • Insert a crimped mattress tube into each slot in the straight side rail. • Tap the ends of the crimped mattress tubes with a hammer until they snap into place. 2 Metal Tab Showing INCORRECT CORRECT • Check to be sure the crimped mattress tubes are inserted properly. • There is a metal tab on one side of the crimped end. Make sure the metal tab is not showing. • Pull up firmly on the crimped mattress tubes to be sure they are securely in place. • If the crimped mattress tubes can be removed from the straight side rail, re-read and repeat step .1 • Insert the mattress tube into the hole in the straight side rail. 3 Mattress Tube Mattress Tube Straight Side Rail 3 Toddler Bed Assembly 4 Straight Side Rail Crimped Mattress Tubes Screw Holes • Position the other straight side rail so that the screw holes on each straight side rail are on the same side. Helpful Hint: The assembly of the crimped mattress tubes to the straight side rail is permanent. Once assembled properly, you will be unable to remove the straight side rail. • Fit the slots and hole in the straight side rail onto the mattress tubes. • Push down on both ends of the straight side rail to be sure the crimped mattress tubes snap into place. 5 INCORRECT CORRECT Metal Tab Showing • Check to be sure the crimped mattress tubes are inserted properly. • There is a metal tab on one side of the crimped end. Make sure the metal tab is not showing. • Pull up firmly on the straight side rail to be sure the mattress tubes are securely in place. • If the straight side rail can be removed from the crimped mattress tubes, re-read and repeat step .4 6 Crimped Mattress Tube Mattress Tube Curved Side Rail Crimped Mattress Tubes Mattress Tube Curved Ends • Repeat steps -to assemble the curved side rails and remaining crimped and regular mattress tubes. 1 5 • Make sure the curved ends of the curved side rails are on the same side. 7 Curved Side Rail Curved Side Rail Straight Side Rail Straight Side Rail • Place both metal frame assemblies on a flat surface. • Insert the straight side rails into the curved side rails, as shown. 4 Toddler Bed Assembly Fisher-Price 8 Mattress Retainer #10 – 24 x 11/4" Screw Shown Actual Size Metal Frame • Locate the holes in the metal frame, near the middle. • Position a mattress retainer so that the arrow is pointing up and is over the hole on...