Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Adult Assembly Required. Save these instructions for future use. This item is a toy for dolls only. For children ages (3) years and older. \-t-v- PRODUCT MODEL NUMBER: 00369 Visit us online at Toll-Free Customer Service: 1 -800-236-1310 (Monday to Thursday 7:30 AM-4:30 PM CST) Web: • E-mail: parts1@badgerbasket.com PLANT AND GENERAL OFFICE: PO Box 227, Edgar, WI 54426-0227 • Phone: 715-352-2311 • Fax: 715-352-3163 CORPORATE OFFICE: 111 Lions Dr., Suite 220, Barrington, IL 60010 Page 1 of 3 1.0/0407/TG PARTS AND HARDWARE: STOP BEFORE YOU BEGIN ASSEMBLY: Check all parts and hardware listed. If anything is missing or you have questions, please DO NOT call the store or return the product to them. Contact us for assistance. Most problems are resolved without you needing to leave home. When emailing or calling us, please have this instruction manual and your product model number ready. For fastest service, go to TOOLS NEEDED: Phillips Screwdriver A power screwdriver is helpful but be careful not to damage the product. PARTS INCLUDED: (A) 2 - Rockers (b) 1 - Bar (C) 2 - Screws (D) 1 - Cradle Body (E) 2 - Bolts (F) 1 - Fabric Liner (G) 1 - Fabric Sheet (h) 1 - Mattress Pad WARNING !! CHOKING HAZARD! SMALL PARTS! Not for children under three (3) years of age. Please make sure children know that this furniture is for dolls and stuffed animals only. It is not to be used with real infants or with pets. Children should NEVER attempt to sit or stand on the cradle. i Cx2 E 1 Ex2 I 1 Hardware not to scale CARE INSTRUCTIONS: Wipe the doll cradle clean with a damp cloth and mild soap as needed. Never immerse the cradle body/rockers in water or any liquid. The fabric parts are made with poly/cotton fabric. For longevity of the product, we recommend spot cleaning or gently hand washing as needed; however you can machine wash the fabric parts in cold water, gentle cycle and air dry or tumble dry on low if desired. Page 2 of 3 1.0/0407/TG PICTURE 1 PICTURE 2 STEP 1 - PICTURE 1: Assemble the rocker base using the TWO ROCKERS (A), ONE BAR (B), and TWO SCREWS (C). The countersunk holes on the rockers face out for the heads of the screws. The threaded inserts on the bar face up for use in STEP 2. STEP 2 - PICTURE 2: Attach the CRADLE BODY (D) to the BAR (B) using TWO BOLTS (E). Insert the bolts through the cradle body and screw them into the threaded inserts on the bar. STEP 3 - PICTURE 3: Dress the FABRIC LINER (F) onto the CRADLE BODY (D). Dress the FABRIC SHEET (G) onto the MATTRESS PAD (H) and put them inside of the CRADLE BODY (D). The WICKER DOLL CRADLE is now assembled! F G, H ' ‘ __^ I* Page 3 of 3 1.0/0407/TG...