Stimmen - 4, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
Clean with a dry lint-free cloth. Never spray cleaning agents on the Heritage SVT-410HLF. Avoid abrasive cleansers which would damage the finish. Ampeg continually develops new products and improves upon existing ones. For this reason, the specifications and information in this manual are subject to change without notice. “Ampeg” is a registered trademark of LOUD Technologies Inc. All other brand names mentioned are trademarks or registered trademarks of their respective holders and are hereby acknowledged. Service Information If you are having a problem with your Heritage SVT-410HLF cabinet, you can go to our website (and click on Support for service information, or call Technical Support at 1-800-898-3211 Monday-Friday during normal business hours, PST, to receive assistance. If you are outside of the U.S., contact your local distributor for technical support and service. Heritage Bass Guitar Cabinets SVT-410HLF / SVT-810E SVT-810E Jackplate POWER HANDLING: 800W RMS (MONO) 400W RMS (DUAL) IMPEDANCE: 4 OHMS (MONO) 8 OHMS (DUAL) PIN 1+ = POS (+) PIN 1- = NEG (-) 4X10-DUAL MODE ONLY 4X10-DUAL MODE MONO INPUTS -or- 3 2 1 1: 1/4” Upper 4x10 Dual Mode Input Jack 2: 1/4” Lower 4x10 Dual Mode or Mono Mode Input / Output Jacks 3: Speakon® Lower 4x10 Dual Mode or Mono Mode Input / Output Jacks The cabinet operates in Dual Mode whenever a connector is inserted into the 1/4” Upper 4x10 Dual Mode input jack [1]. Otherwise, the cabinet operates in the single 8x10 Mono Mode. Speakon® to 1/4” Wiring Diagram: 1- 1+1- 1+ 1 2 Combined (Mono) Split (Dual) Heritage Bass Guitar Cabinets SVT-410HLF / SVT-810E 10 SVT-810E Suggested Hookup Diagrams In the first example, a speaker cable with 1/4” or Speakon® ends connects from the speaker output of the amplifier to the speaker input of the Ampeg Heritage SVT-810E cabinet. In example number two, a speaker cable with 1/4” ends connects from the speaker output of the amplifier to the speaker input of the Ampeg Heritage SVT-810E cabinet. An additional speaker cable with 1/4” ends connects from the speaker output of another amplifier to the speaker input of the Ampeg Heritage SVT-810E cabinet’s 1/4” Upper 4x10 Dual Mode Input Jack. This allows two amplifiers to separately drive each 4x10 section of the full cabinet. WARNING: Always use good quality (non-shielded) speaker cables. Never use (shielded) instrument cables to connect speakers to an amplifier. Also, do not use both cable routes in the first example listed above. Use one route or the other, but not both! Heritage Bass Guitar Cabinets SVT-410HLF / SVT-810E Heritage SVT-810E TECHNICAL SPECIFICATIONS Type 8x10 / Dual 4x10 Bass Enclosure Frequency Response (+/–3 dB) 58 Hz – 5 kHz Usable Low Frequency (–10 dB) 40 Hz RMS Power Handling Combined / Mono Mode: 800 watts 8x10 Split / Dual Mode: 400 watts each 4x10 Peak Power Handling Combined / Mono Mode: 1600 watts 8x10 Split / Dual Mode: 800 watts each 4x10 Impedance Combined / Mono Mode: 4 ohms 8x10 Split: 8 ohms each 4x10 Sensitivity Combined / Mono Mode: 100 dB SPL 1w/1m Maximum SPL 130 dB Components 8 Custom Designed Eminence 100 watt 10” speakers Size (H x W x D) 48.0 in/1219 mm (with feet) x 26.0 in/660 mm x 16.0 in/406 mm Weight 137 lb/62.14 kg (approximately) Speakon® is a registered TM of Neutrik AG Eminence® is a registered TM The Heritage SVT-810E is covered with a durable fabric-backed vinyl material. Clean with a dry lint-free cloth. Never spray cleaning agents on the Heritage SVT-810E. Avoid abrasive cleansers which would damage the finish. Ampeg continually develops new products and improves upon existing ones. For this reason, the specifications and information in this manual are subject to change without notice. “Ampeg” is a registered trademark of LOUD Technologies Inc. All other brand names mentioned are trademarks or registered trademarks of their respective holders and are hereby acknowledged. Service Information If you are having a problem with your Heritage SVT-810E cabinet, you can go to our website (and click on Support for service information, or call Technical Support at 1-800-898-3211 Monday-Friday during normal business hours, PST, to receive assistance. If you are outside of the U.S., contact your local distributor for technical support and service. ©2009 LOUD Technologies Inc. 16220 Wood-Red Road NE • Woodinville, WA 98072 Part No. SW0820 Rev. A 12/09 800W RMS (MONO 400W RMS (DUA (MONO) (DUAL) INSIDEOwner s Manual .................................................................................................. 800W RMS (MONO 400W RMS (DUA (MONO) (DUAL) INSIDEOwner s Manual .................................................................................................. ...
Dieses Handbuch ist für folgende Modelle:Kindermöbel - HERITAGE SVT-810E (1.12 mb)