Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
Measured values are then shown on the display. Such features make this watch useful when hiking, mountain climbing, or when engaging in other such outdoor activities. Warning ! • The measurement functions built into this watch are not intended for taking measurements that require professional or industrial precision. Values produced by this watch should be considered as reasonable representations only. • When engaging in mountain climbing or other activities in which losing your way can create a dangerous or life-threatening situation, always use a second compass to confi rm direction readings. • Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss suffered by you or any third party arising through the use of this product or its malfunction. About This Manual • The operational procedures for Modules 3173 and 3246 are identical. All of the illustrations in this manual show Module 3173. • Depending on the model of your watch, display text appears either as dark fi gures on a light background, or light fi gures on a dark background. All sample displays in this manual are shown using dark fi gures on a light background. • Button operations are indicated using the letters shown in the illustration. • Note that the product illustrations in this manual are intended for reference only, and so the actual product may appear somewhat different than depicted by an illustration. Things to check before using the watch 1. Check the battery power level. Is “H” or “M” displayed for the battery power indicator? Go to step 2. Power is low. Charge the watch by placing it in a location where it is exposed to light. For details, see “Charging the Watch”. NO YES YES Does any one of the following conditions exist? • Battery power indicator shows “L” and “LOW” is displayed in the upper left corner of the screen. • “C” is displayed in the lower left corner of the screen. • The face is blank. The watch is charged sufficiently. For details about charging, see “Charging the Watch”. NEXT Battery power indicator 2. Check the Home City and the daylight saving time (DST) setting. Use the procedure under “To confi gure Home City settings” to confi gure your Home City and daylight saving time settings. Important! World Time Mode and Sunrise/Sunset Mode data depend on correct Home City, time, and date settings in the Timekeeping Mode. Make sure you confi gure these settings correctly. 3. Set the current time. See “Confi guring Current Time and Date Settings”. The watch is now ready for use. Charging the Watch The face of the watch is a solar cell that generates power from light. The generated power charges a built-in rechargeable battery, which powers watch operations. The watch charges whenever it is exposed to light. Charging Guide Whenever you are not wearing the watch, leave it in a location where it is exposed to light. • Best charging performance is achieved by exposing the watch to the strongest light available. When wearing the watch, make sure that its face is not blocked from light by the sleeve of your clothing. • The watch may enter a sleep state if its face is blocked by your sleeve even only partially. Warning! Leaving the watch in bright light for charging can cause it to become quite hot. Take care when handling the watch to avoid burn injury. The watch can become particularly hot when exposed to the following conditions for long periods. • On the dashboard of a car parked in direct sunlight • Too close to an incandescent lamp • Under direct sunlight Important! • Allowing the watch to become very hot can cause its liquid crystal display to black out. The appearance of the LCD should become normal again when the watch returns to a lower temperature. • Turn on the watch’s Power Saving function and keep it in an area normally exposed to bright light when storing it for long periods. This helps to ensure that power does not run down. • Storing the watch for long periods in an area where there is no light or wearing it in such a way that it is blocked from exposure to light can cause power to run down. Expose the watch to bright light whenever possible. (Light) (Light) (Light) Module 3173 (Light) Module 3246 Power Levels You can get an idea of the watch’s power level by observing the battery power indicator on the display. Level Battery Power Indicator Function Status 1 (H) All functions enabled. 2 (M) All functions enabled. 3 (L) l l l l l l l l l l l l l l l l l l Illumination, beeper, and sensor operation disabled. 4 (C) Except for timekeeping and the C (charge) indicator, all functions and display indicators disabled. 5 All functions disabled. • The fl ashing LOW indicator at Level 3 (L) tells you that battery power is very low, and that exposure to bright light for charging is required as soon as possible. • At Level 5, all functions are disabled and settings return to their initial factory defaults. Once the battery reaches Level 2 (M) after falling to Level 5, reconfi gure the current time, dat...
Dieses Handbuch ist für folgende Modelle:Armbanduhren - 3246 (1.58 mb)