Stimmen - 4, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
•Auto receive of the calibration signal is designed to be performed early in the morning, while you sleep (provided that the Timekeeping Mode time is set correctly). Before going to bed for the night, remove the watch from your wrist, and put it in a location where it can receive the signal easily. •The watch receives the calibration signal for two to seven minutes everyday when the time in the Timekeeping Mode reaches a calibration time. Do not perform any button operation within seven minutes before or after the calibration times. Doing so can interfere with correct calibration. •Remember that reception of the calibration signal depends on the current time in the Timekeeping Mode. The receive operation will be performed whenever the display shows any one of the calibration times, regardless of whether or not the displayed time actually is the correct time. About the Signal Strength Indicator The signal strength indicator shows the strength of the calibration signal being received. For best reception, be sure to keep the watch in a location where signal strength is strongest. The signal strength indicator is displayed while an auto or manual receive operation is in progress. Strong Weak •Even in an area where signal strength is strong, it takes about 10 seconds for signal reception to stabilize enough for the indicator to indicate signal strength. llllllllllllll llllllllllllll RCVD indicator Signal strength indicator •Use the signal strength indicator as a guide for checking signal strength and for finding the best location for the watch during signal receive operations. •Following reception of the time calibration signal and calibration of the watch’s time setting, the RCVD indicator will remain on the display in all modes. The RCVD indicator will not be displayed if signal reception was unsuccessful or after you adjust the current time setting manually. •The RCVD indicator is displayed only when the watch is able to receive both time and date data successfully. It does not appear when only time data is received. •The RCVD indicator indicates that at least one calibration signal receive operation (auto or manual) was successful during the current day. Note that the RCVD indicator disappears from the display each day when the first receive operation of the day is performed. Operation Guide 3215 3222 3 To perform manual receive 1. Enter the Timekeeping Mode. 2. Hold down D for about two seconds until the RCVD indicator starts to flash on the display. This indicates that manual receive is in progress. • Time calibration signal reception takes from two to seven minutes. Take care that you do not perform any button operations or move the watch during this time. • If the receive operation is successful, the reception date and time appear on the display, along with the GET indicator. 3. After manual receive is complete, press D to return to normal timekeeping. • The watch also will return to normal timekeeping if you do not perform any button operation for about one or two minutes. Receiving Receive successful llllllllllllll llllllll llllll • If the latest reception fails but a previous reception was successful during the current day, the RCVD indicator will be on the display. • The watch will return to normal timekeeping without changing the time setting if you press D or if you do not perform any button operation for about one or two minutes. Note • To interrupt a receive operation and return to normal If there was a previously timekeeping, press D. successful reception Receive failed To turn auto receive on and off 1. In the Timekeeping Mode, press D to display the latest successful receive time and date screen. 2. Hold down A until the current auto receive setting (ON or OFF) starts to flash. This is the setting screen. • Note that the setting screen will not appear if the currently selected Home City is one that does not support time calibration reception. 3. Press D to toggle auto receive on (ON) and off (OFF). 4. Press A to exit the setting screen. • For information about city codes that support signal receive, see “To specify your Home City”. ll llllll llll l l ll ll ll l l lllllllllllll l On/Off status To check the latest signal reception results Press D to view the latest successful receive time and date. Press D again to return to the previous screen. • The watch will return to the previous screen automatically if you do not perform any operation for two or three minutes. • The watch is not in the Timekeeping Mode. • Your current Home City is not one of the following: LIS, LON, MAD, PAR, ROM, BER, STO, ATH, MOW, HKG, BJS, TPE, SEL, TYO, HNL, ANC, YVR, LAX, YEA, DEN, MEX, CHI, NYC, YHZ, or YYT • A countdown timer operation is in progress. Cannot perform manual receive. • Enter the Timekeeping Mode and try again. • Select LIS, LON, MAD, PAR, ROM, BER, STO, ATH, MOW, HKG, BJS, TPE, SEL, TYO, HNL, ANC, YVR, LAX, YEA, DEN, MEX, CHI, NYC, YHZ, or YYT as your Home City. • Enter the Countdown Timer Mode and s...
Dieses Handbuch ist für folgende Modelle:Armbanduhren - 3222 (1.87 mb)